QUALITÄT & REINHEITRecombinant?Recombinant — produced via recombinant expression for defined sequence and consistency. Use for reproducible, animal-free proteins of known origin.DNase, RNase free?Free of DNase and RNase activity to keep DNA and RNA intact. Use in nucleic-acid extraction, PCR, and storage where degradation is a risk.PCR Reagent?PCR grade — nuclease-free, inhibitor-free reagents for reliable amplification. Use in PCR/qPCR where contaminants would block or bias amplification.≥95%(SDS-PAGE)500 μg/mL
Extreme Thermostable Single-Strand DNA Binding Protein (ET SSB) is a single-strand DNA binding protein isolated from thermophilic microorganisms, with a molecular weight of 16 kDa. It retains full activity after incubation at 95°C for 60 minutes. Due to its extremely high thermostability, ET SSB can be used in applications requiring very high temperature conditions, such as nucleic acid amplification and sequencing.
ET SSB is a sequence‑independent single‑strand DNA binding protein; it does not bind RNA or double‑stranded DNA. ssDNA is prone to degradation by DNase and the formation of secondary structures, and its instability greatly limits the normal progress of enzymatic reactions. Binding of ET SSB to ssDNA stabilizes and protects single‑stranded DNA from DNase degradation or secondary structure formation, facilitates the binding of DNA polymerase to the substrate, thereby increasing the catalytic activity of DNA polymerase and improving the amplification efficiency of PCR and other reactions.
SSB proteins exist in almost all organisms. Although all SSB proteins have similar functions, they share little sequence similarity and differ significantly in their ssDNA binding properties. Based on their oligomeric state, SSB proteins can be classified into four types: monomers, homodimers, heterotrimers, and homotetramers. ET SSB originates from hyperthermophilic microorganisms and exists mainly as a monomer in solution, with each monomer encoding one OB‑fold domain. It forms dimers or multimers only when binding to single‑stranded DNA substrates.
Applications
Increase the processivity of DNA polymerase;
Stabilize and label ssDNA structures;
Improve the yield and specificity of PCR and isothermal amplification reactions;
Enhance the yield and conversion efficiency of reverse transcriptase (RT) during RT‑PCR;
Improve DNA sequencing in regions with strong secondary structures;
Enhance the activity of RecA in ssDNA binding and strand transfer.
Usage Method
ET SSB is active in any polymerase buffer;
Add 50–200 ng of ET SSB per 50 μL reaction system.
Quality Control
Protein Purity Assay
SDS‑PAGE analysis shows protein purity ≥95%.
Endonuclease Activity Assay
After incubating 0.5 μg ET SSB with 200 ng of supercoiled plasmid DNA at 37°C for 4 hours, agarose gel electrophoresis detects that less than 10% of the plasmid DNA is converted to nicked or linear forms.
Non‑Specific Nuclease Activity Assay
After incubating 0.5 μg ET SSB with 15 ng of double‑stranded DNA fragments at 37°C for 16 hours, agarose gel electrophoresis shows no change in the double‑stranded DNA substrate.
Host DNA Residue Detection
Using E. coli 16S rDNA‑specific primer/probe sets and real‑time PCR, the residual E. coli host genomic DNA in 0.5 μg ET SSB is less than 10 copies.
Precautions
This product is for professional scientific research use only. It must not be used for clinical diagnosis or treatment, nor for food or drug purposes, nor stored in ordinary residential areas.
For your safety and health, wear a lab coat and disposable gloves during handling.
Spezifikationen
Product Name
Extreme Thermostable Single-Stranded DNA Binding Protein, CAS No.E1520753
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Bewertungen
Kundenbewertungen
Application Protocols
The following are general, literature-based workflows illustrating how a thermostable SSB can be incorporated into common assays. They are not product-specific specifications; optimize for your system.
PCR enhancement (difficult template)
Prepare master mix with polymerase buffer, dNTPs, primers, Mg2+, and polymerase.
Add SSB to yield an initial 50–100 ng/mL final concentration; prepare a titration series (e.g., 0, 50, 200, 500 ng/mL).
Add template DNA and water to volume. Cycle with standard conditions; compare yield/specificity across the titration.
LAMP acceleration
Assemble standard LAMP mix (polymerase, primers, Mg2+, betaine if used).
Add SSB at a low level (e.g., 10–100 ng/mL) and incubate at 60–68 °C; monitor time-to-positive or endpoint yield.
Prevention of re-annealing in ligation-based library prep
After end-repair and A-tailing, add a small amount of SSB to maintain ssDNA overhangs.
Proceed to adapter ligation; remove or dilute SSB if required for downstream steps.
Troubleshooting tips
If amplification slows or inhibition appears, reduce SSB concentration and/or increase KCl/NaCl by 25–50 mM.
For very GC-rich templates, combine minimal DMSO (2–5%) with SSB and re-optimize Mg2+.
Always use nuclease-free plastics and solutions to preserve DNase/RNase-free status.
For validated, item-specific protocols, consult the product’s CoA/Spec Sheet.
Biological Roles
Single-stranded DNA-binding proteins are central to genome maintenance in all domains of life (general literature).
Cellular functions
Stabilize ssDNA generated during replication, recombination, and nucleotide excision repair, preventing hairpins and aberrant re-annealing.
Recruit and coordinate DNA-processing enzymes via acidic C-terminal tails that interact with helicases, nucleases, and polymerases.
Mechanism of binding
OB-fold domains contact ssDNA through base-stacking and electrostatic interactions, with binding modes that vary with salt, temperature, and oligomeric state (e.g., (SSB)65 vs (SSB)35 modes in bacterial SSBs).
Thermostability aspect
Extreme thermophiles encode SSBs with enhanced thermal resilience and hydrophobic core packing, maintaining tight ssDNA binding at high temperatures encountered during PCR denaturation.
Relevance to laboratory practice
Exploiting the natural role of SSB in stabilizing replication intermediates translates to improved robustness of amplification, cloning, and sequencing workflows under stringent conditions.
Note: The above describes general properties of SSB family proteins; item-specific sequence, origin, and biophysical constants are not specified for this product.
Buffer Applications
This reagent is not a buffering agent. However, buffer composition materially affects SSB performance; the following are general, literature-based considerations for use in nucleic-acid workflows.
Common working buffers (general)
PCR: 10–50 mM Tris-HCl (pH 8.3–8.8 at 25 °C), 50–200 mM KCl/NaCl, 1.5–3.0 mM MgCl2 (polymerase dependent), 0.01% Tween-20 optional.
Isothermal amplification: 10–20 mM Tris-HCl or HEPES (pH 7.5–8.0), 50–100 mM NaCl/KCl, Mg2+ as required by polymerase, 1–10 mM DTT if enzyme mixes are used.
Additives
Glycerol (5–50%) commonly stabilizes proteins during storage; final reaction glycerol is typically kept <5–10% to avoid polymerase inhibition (optimize empirically).
Avoid SDS and high concentrations of chaotropes that denature proteins.
Preparation tips
Use nuclease-free water and filtered buffers. Equilibrate buffer pH at the intended working temperature, especially for Tris-based systems, whose pH is temperature-dependent.
Item-specific formulation/buffer supplied: Not specified for this item; refer to CoA/Spec Sheet.
Green Alternatives
While “green chemistry” frameworks target solvents and reagents that impact EHS footprints, protein additives can indirectly enable greener nucleic-acid workflows.
How thermostable SSB contributes (general)
By suppressing secondary structures, SSB can lessen or eliminate the need for high percentages of organic PCR enhancers (e.g., DMSO, formamide) and osmolytes (e.g., betaine). This reduces volatile organic use, odor, and waste hazards.
Balanced comparison (general literature)
| Approach | Benefit | Trade-offs |
|---|---|---|
| Thermostable SSB | Enhances specificity without VOCs; active through thermal cycling | Cost per reaction; requires optimization |
| DMSO (5–10%) | Disrupts GC pairing; widely available | VOC; may inhibit polymerases; can alter melting temps |
| Formamide (1–5%) | Strong secondary-structure disruptor | Toxic; disposal and exposure concerns |
| Betaine (0.5–1.5 M) | Stabilizes AT/GC melting disparities | High ionic strength; can affect enzyme kinetics |
Practical guidance
Screen SSB first for difficult templates. If additional enhancers are needed, combine with minimal DMSO/betaine concentrations and re-optimize Mg2+ and annealing temperature to maintain performance.
Pharmaceutical Uses
This product is intended for research use only (per Product Data) and is not for use in humans or for clinical diagnostics.
Formulation/excipient role: Not applicable.
Pharmacopeial status: Not specified for this item; no pharmacopeial monograph is implied.
Manufacturing considerations: If used in process development R&D (e.g., analytical methods for nucleic acids), qualify internally for residual nucleases, host-cell proteins, and endotoxin as required by your institutional standards.
No medical or clinical claims are made or implied for this product.
Physical Properties
Item-specific physico-chemical constants are not provided for this recombinant protein.
Appearance/physical state: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet. (Literature: thermostable SSB monomers commonly ~14–20 kDa, oligomeric complexes ~56–80 kDa, depending on source and tag.)
Isoelectric point (pI): Not specified for this item; refer to CoA/Spec Sheet. (Literature: many SSBs exhibit pI in the acidic-to-neutral range.)
Solubility: Not specified for this item; refer to CoA/Spec Sheet. (General: Highly soluble in aqueous buffers containing 50–200 mM monovalent salts; often stabilized by 5–50% glycerol and reducing agents.)
Extinction coefficient: Not specified for this item; refer to CoA/Spec Sheet. (General: Determine empirically at 280 nm based on amino-acid composition.)
Stability (general literature)
Thermostability: Engineered/derived to retain activity through repeated thermal cycling (e.g., 95 °C denaturation steps in PCR).
Salt effects: ssDNA affinity and oligomerization of many SSBs depend on ionic strength; moderate salt (50–200 mM NaCl/KCl) often improves performance by minimizing nonspecific interactions.
Formulation dependencies (general)
Detergents (SDS), strong chaotropes (guanidinium, urea), or high organic cosolvent can disrupt binding; Mg2+ is not required for binding but may be present in DNA polymerase buffers.
Recombinant: Produced in a defined host with controlled expression and purification, ensuring lot-to-lot consistency and enabling removal of host nucleases.
DNase/RNase-free: Processed with stringent nuclease control and QC testing to avoid degradation of DNA/RNA in amplification and library-prep workflows.
PCR reagent grade: Suitable UV absorbance/fluorescence background and formulation purity compatible with PCR/qPCR, minimizing inhibition of thermostable DNA polymerases.
Practical expectations and verification
Absence of contaminating nucleases and proteases is critical; verification is typically via functional amplification tests and nuclease activity assays (literature practice). Exact test methods/limits: Not specified for this item; refer to CoA/Spec Sheet.
Endotoxin, host-cell protein/DNA levels, and exact buffer composition are not specified for this item; refer to CoA/Spec Sheet if relevant to sensitive applications.
Stabilizers and additives
Any stabilizers (e.g., glycerol, DTT, salts) used in the supplied formulation are not specified for this item; refer to CoA/Spec Sheet.
Documentation
For regulated or highly sensitive workflows, retain lot-specific CoA and SDS and perform incoming QC (activity titration in your assay matrix).
Reaction and Applications
Thermostable SSBs enhance nucleic-acid workflows that transiently generate or require single-stranded DNA.
PCR and qPCR (general literature)
Promotes efficient primer annealing and suppresses secondary structures in GC-rich regions, improving yield and specificity during thermal cycling (94–98 °C denaturation; 55–72 °C anneal/extend).
Particularly useful in multiplex PCR and long-amplicon PCR where template secondary structure is problematic.
Isothermal amplification (general)
LAMP, SDA, and helicase-dependent amplification benefit from SSB-mediated stabilization of ssDNA intermediates, often increasing speed and sensitivity.
Next-generation sequencing/library prep (general)
Aids in end-repair, A-tailing, and adapter-ligation workflows by minimizing re-annealing of short ssDNA overhangs and hairpins.
Strand displacement and DNA nanotechnology (general)
Facilitates strand-exchange reactions and assembly processes by preventing off-pathway folding.
Practical usage tips (general guidance, not item-specific specifications)
Typical working ranges reported in literature: on the order of 10–500 ng/mL (0.01–0.5 µg/mL) for PCR mixes; higher levels (up to a few µg/mL) may be used for highly structured templates. Start with a low concentration and titrate.
Add SSB to the master mix before template addition. Maintain nuclease-free technique. Adjust salt if nonspecific binding is observed (moderate salt can reduce off-target interactions).
Reaction Conditions
General, literature-based guidance for using a thermostable SSB in nucleic-acid reactions (not product-specific specifications):
PCR/qPCR
Temperature: Compatible with standard cycling (94–98 °C denaturation, 55–72 °C anneal/extend). Beneficial for high-GC or repeat-rich templates.
Buffer: Use the DNA polymerase’s recommended buffer; include 50–200 mM monovalent salt when troubleshooting nonspecific binding.
Typical SSB levels: Start in the 10–100 ng/mL range; titrate up to ~0.5–2 µg/mL for very structured templates while monitoring polymerase activity.
LAMP / isothermal amplification
Temperature: 60–72 °C depending on polymerase.
Conditions: Include Mg2+ per enzyme requirements; SSB can accelerate reaction onset by stabilizing loop regions.
Strand displacement assays
Pair with strand-displacing polymerases (e.g., Bst-like) and helicases where applicable; moderate salt improves selectivity.
Practical optimization
Titrate SSB while holding template and primer concentrations constant; monitor Cq/endpoint yield and specificity.
If inhibition is observed at high SSB, increase salt slightly or reduce SSB concentration.
Organic enhancers (DMSO/betaine) can be reduced or omitted when SSB is effective; re-optimize Mg2+ and annealing temperature accordingly.
Exact optimal conditions depend on template complexity, polymerase, and buffer composition; perform a small matrix titration to identify the best parameters.
Safety and Handling
GHS/SDS status
Signal word, hazard statements, pictograms: Not specified for this item; refer to SDS for authoritative safety data.
General laboratory safety for protein reagents
Handle using good laboratory practices: lab coat, safety glasses, and appropriate gloves.
Avoid inhalation of powders/aerosols and contact with eyes/skin. Work in a clean area to prevent nucleic acid contamination.
Specific considerations for nucleic-acid–grade proteins
DNase/RNase-free handling: Use nuclease-free tips/tubes and dedicated benches to maintain RNase/DNase-free status. Keep containers closed to prevent contamination.
Biological origin: Recombinant protein; not from human material. Treat as a biological reagent; not for ingestion or injection.
Chemical incompatibilities (general)
Avoid strong oxidizers, anionic detergents (e.g., SDS), and chaotropes (guanidinium, high urea) that can denature the protein or disrupt ssDNA binding.
Minimize exposure to proteases; maintain reducing conditions if recommended by the CoA.
First-aid overview (general guidance; defer to SDS)
Skin/eye contact: Rinse with water for several minutes; remove contaminated clothing; seek medical attention if irritation persists.
Inhalation of aerosols: Move to fresh air; seek medical attention if symptoms occur.
Ingestion: Rinse mouth; seek medical advice.
Waste disposal
Dispose of protein-containing solutions as nonhazardous aqueous lab waste unless local regulations or experimental additives dictate otherwise. Follow institutional and local regulations.
Solvent Selection
This is an aqueous protein reagent; conventional organic solvent selection is not applicable.
Relevant medium (general)
Aqueous buffers (e.g., Tris-HCl, HEPES) with 50–200 mM monovalent salt (NaCl/KCl) are commonly compatible. Many SSBs are supplied in buffers with stabilizers (e.g., glycerol) to permit −20 °C storage.
Compatibility guidance (general literature)
Compatible: Water, nuclease-free buffers, Mg2+-containing PCR buffers; nonionic detergents (trace Tween-20/NP-40) are often tolerated in PCR mixes.
Use with caution/avoid: High concentrations of organic cosolvents (e.g., >5–10% DMSO), anionic detergents (SDS), and chaotropes (urea, guanidinium), which can reduce binding or denature the protein.
Choosing additives (general)
When replacing formamide/DMSO/betaine for difficult templates, a thermostable SSB can improve yield/ specificity, potentially allowing lower levels of organic additives. Optimize empirically in your buffer system.
Storage and Reconstitution
Item-specific storage and shipping (from Product Data)
Storage: Store at −20 °C.
Shipped: Ice chest + ice pads.
Physical form and concentration: Not specified for this item; refer to CoA/Spec Sheet.
General handling best practices for recombinant proteins (literature-based guidance)
Minimize freeze–thaw cycles. If supplied in solution, aliquot upon first thaw and refreeze promptly at −20 °C (or −80 °C if recommended by your workflow).
Many SSB formulations contain glycerol (e.g., up to 50%) to permit storage at −20 °C without freezing; verify actual formulation on the CoA.
Keep on ice during use. Mix gently; avoid vigorous vortexing that can denature proteins or introduce bubbles.
Reconstitution (if lyophilized; not item-specific)
Reconstitute with nuclease-free water or buffer (e.g., 10 mM Tris-HCl, 50–150 mM NaCl, 1 mM DTT), then make working aliquots. Filter-sterilize buffers when possible. Exact diluent and target concentration: Not specified for this item; refer to CoA/Spec Sheet.
Stability after dilution (general)
Short-term on ice/4 °C for the working day; for longer-term, store aliquots at −20 °C. Include protein stabilizers (e.g., BSA 0.1 mg/mL) only if compatible with your assay.
Always consult the lot-specific CoA and SDS for definitive formulation details and storage guidance.
Structure and Identity
Professional-grade recombinant protein engineered for high-temperature binding to single-stranded DNA (ssDNA).
Item identity (from Product Data)
Product name: Extreme Thermostable Single-Stranded DNA Binding Protein (SSB)
SKU: E1520753
Grade/Purity: Recombinant; DNase- and RNase-free; PCR reagent grade
CAS: E1520753 (catalog identifier)
Small-molecule identifiers
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES / InChI / InChIKey: Not applicable to proteins; not specified for this item.
Structural/biomolecular features (general literature)
Protein class: single-stranded DNA-binding protein (SSB), typically forming homodimers or homotetramers with oligonucleotide/oligosaccharide-binding (OB) folds.
Functional domains: OB-fold β-barrel motifs that engage ssDNA via aromatic stacking and electrostatic contacts; acidic C-terminal tail in many SSBs mediates protein–protein interactions.
Quaternary structure: Many thermostable SSBs operate as stable tetramers at elevated temperatures; oligomeric state may be salt- and temperature-dependent (literature).
Functional characterization (general)
Binds ssDNA with high affinity and low sequence bias, stabilizing it during thermal cycling and reducing secondary structure.
Lacks intrinsic nuclease activity; does not degrade DNA or RNA (critical for PCR/RT workflows).
Synthetic Utility
Classical small-molecule synthetic applications do not apply to protein reagents. For molecular biology and DNA-based assembly, thermostable SSB offers substantial utility (general literature):
DNA assembly and cloning
Enhances PCR of GC-rich or structured templates destined for cloning, improving insert fidelity and yield for downstream ligations or Gibson-type assemblies.
Supports primer extension across difficult regions, aiding site-directed mutagenesis and long-amplicon generation by reducing hairpin and repeat-induced stalling.
Library preparation workflows
Can improve end-repair and overhang processing steps by limiting transient secondary structures in adapters and fragments.
These are literature-based roles; item-specific sequence, tags, and kinetic parameters are not specified for this product.
Target Specificity
Not applicable. This product is a DNA-binding protein reagent, not an antibody or affinity reagent with antigen/epitope specificity. No clone, isotype, or species-reactivity information applies.
Häufig gestellte Fragen
What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
Benötigen Sie Hilfe bei der Auswahl der Qualität?
Unser Leitfaden zur Qualitätsauswahl behandelt Reinheit, Stabilisatorstatus und Anwendungseignung für alle Varianten in unserem Katalog.
Wir verwenden Cookies, um die ordnungsgemäße Funktion der Website sicherzustellen und, soweit zulässig, Ihr Nutzererlebnis zu verbessern. Sie können Ihre Einstellungen jederzeit unter „Einstellungen“ verwalten. Weitere Informationen finden Sie in unserer Cookie-Richtlinie.
Dürfen wir Sie über Rabattaktionen informieren?
Später erinnern
Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.