This compound belongs to the class of organic compounds known as o-glycosyl compounds. These are glycoside in which a sugar group is bonded through one carbon to another group via a O-glycosidic bond.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Bewertungen
Kundenbewertungen
Application Protocols
No tested biological assay protocols, dilutions, or control recommendations are provided in the Product Data for this item.
General handling protocol for analytical use:
Prepare a primary stock in DMSO (e.g., 10–50 mM). Record exact mass and volume for traceability.
For HPLC: dilute stock into methanol or initial mobile phase to 10–100 µg/mL; filter (0.2 µm PTFE) before injection.
For plate-based assays: add DMSO stock to buffer to achieve desired final concentration keeping DMSO ≤0.5–1% v/v; include vehicle controls.
These are non-validated, general suggestions for small-molecule handling; adapt to your method and consult the CoA/SDS for additional guidance.
Biological Roles
Icariside F2 belongs to the class of prenylated flavonoid glycosides found in Epimedium species (Berberidaceae), part of the plant’s secondary metabolite arsenal.
General, literature-based biological context (no clinical claims):
Plant function: phenolic glycosides contribute to UV protection, pathogen defense, and signaling. Prenylation often enhances membrane affinity and may alter interactions with proteins and enzymes.
Biotransformation: in mammalian and microbial systems, glycosides can undergo deconjugation by gut or microbial glycosidases releasing the aglycone; subsequent phase II conjugation (glucuronidation/sulfation) is typical for phenolics.
Biophysical behavior: the sugar moiety improves aqueous transport compared to the aglycone, while the prenyl group increases affinity for lipid phases and can promote micelle/protein binding.
In vitro assay relevance: phenolic antioxidants show activity in standard redox assays (DPPH, ABTS, FRAP); binding to serum albumin may affect apparent potency in protein-containing media.
Analytical biomarkers: used as a chemotaxonomic marker and quality-control analyte for Epimedium extracts.
Item-specific bioactivity data are not provided in the Product Data; consult primary literature for mechanistic studies on enzyme modulation or transporter interactions relevant to this compound class.
Buffer Applications
Not typically used as a buffering agent. Icariside F2 does not define a controlled pH system. For aqueous work, prepare stock solutions in a miscible co-solvent (e.g., DMSO or ethanol) and dilute into your chosen buffer (e.g., PBS, HEPES) while maintaining co-solvent below assay-tolerated limits.
If studying stability, evaluate pH-dependent degradation in:
Acidic conditions (risk: glycosidic hydrolysis)
Neutral buffers (preferred for storage stability)
Basic conditions (risk: rapid hydrolysis/oxidation of phenolics)
These are general considerations; no buffer recipes are specific to this item.
Green Alternatives
Greener handling focuses on solvent choices for dissolution, extraction, and chromatography rather than on the substance itself.
Comparison of solvent options (general guidance):
DMSO vs ethanol vs 2-propanol/ water systems:
DMSO: excellent solvency; not “green,” but minimal volumes are used for concentrated stocks in bioassays.
Ethanol (bio-based): greener, low toxicity; may need warming/sonication to reach useful concentrations.
2-Propanol/water: greener blend for extraction and prep-HPLC, balances polarity; may precipitate on cooling.
Chromatography eluents:
Favor ethanol/water over acetonitrile where method performance allows; note higher viscosity and pressure.
Use volatile buffers (ammonium formate/acetate) instead of non-volatile phosphate for LC–MS compatibility and reduced environmental impact.
Solid-phase extraction (SPE): reduces bulk solvent consumption compared with liquid–liquid extraction when cleaning up botanical matrices.
Trade-offs:
Greener alcohol/water systems can compromise resolution or increase backpressure versus acetonitrile.
Ethanol may overlap with UV detection below 220 nm; for flavonoids detected at 254–360 nm, this is usually acceptable.
Recommendation: start with ethanol/water for prep work and DMSO micro-stocks for assays; document solvent volumes to support green metrics (E-factor) in method development.
Pharmaceutical Uses
No excipient or pharmacopeial status is provided for this item. Not specified for this item; refer to CoA/Spec Sheet.
Research and development context (non-clinical, general):
Reference standard in quality control of botanical raw materials and extracts (e.g., Epimedium spp.) using HPLC/LC–MS.
Tool compound for pre-formulation studies exploring solubility enhancement strategies for prenylated flavonoid glycosides (e.g., cyclodextrin inclusion, cosolvents, lipid-based systems) in vitro.
Stability studies under ICH-like stress conditions to map degradation pathways (acid/base hydrolysis, oxidative, photolytic), supporting analytical method validation.
No therapeutic or clinical use is implied; for research use only as stated in the Product Data.
Physical Properties
Item-specific physico-chemical specifications are not supplied in the Product Data.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Melting point (literature, for related icariin-type glycosides): often decompose/melt >200 °C with broad endotherm; exact MP for Icariside F2 should be confirmed from primary literature or CoA.
Solubility (general guidance, literature/experience with prenylated flavonoid glycosides):
Water: typically very low solubility at neutral pH due to hydrophobic prenyl; increases modestly in basic aqueous media but risk of degradation.
Organic: soluble in DMSO and DMF; moderately soluble in methanol/ethanol; limited in acetonitrile; sparing in nonpolar solvents.
LogP/logD: prenylation increases lipophilicity relative to non-prenylated glycosides; expect moderate logD at pH 7.4 (literature trend; value not specified).
pKa (phenolic OH): multiple acidic phenols typically pKa ~7–10 (literature range for flavonoids; exact values not specified for this compound).
UV-Vis (literature, flavonol chromophore): strong bands around 260–280 nm (Band II) and 330–380 nm (Band I), sensitive to substitution and solvent; use for purity profiling by HPLC-DAD.
All numerical specifications for this catalog item: Not specified for this item; refer to CoA/Spec Sheet.
Quality and Grades
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Guidance on quality considerations for this natural product standard:
Identity confirmation: Typically established by HRMS, 1H/13C NMR, and HPLC purity profile. For prenylated flavonoid glycosides, diagnostic UV (two-band pattern) and LC–MS with [M−H]− in ESI negative mode are common.
Purity reporting: HPLC area% at 254–360 nm is often used; note that phenolic chromophores can have wavelength-dependent responses. When comparing across lots, ensure the same detection wavelength and method.
Counter-ions/additives: Not applicable for neutral glycosides; however, trace residual solvents may be present from isolation—check CoA.
Stabilizers: None are typically used; avoid adding bases which can trigger deglycosylation. If a stabilizer is declared on the CoA, consider its impact on your assay (UV absorbance/interference).
Lot-to-lot consistency: Natural product derivatives can display subtle polymorphism/solvate states affecting apparent melting point and solubility; rely on HPLC and spectral matching rather than MP alone.
Recommended acceptance tests for incoming QC (general): appearance, HPLC purity (>95% when applicable), identity by MS/NMR, water content by KF, and residual solvent analysis (GC). Specific numeric criteria: Not specified for this item; refer to CoA/Spec Sheet.
Reaction and Applications
This compound is primarily used as a reference standard and research tool rather than as a routine reagent. Typical research applications (literature/general for icariin-type glycosides):
Reference and QC standard: quantitative marker in Epimedium extract profiling by HPLC-DAD/LC–MS; stability studies under stress conditions (light, heat, pH).
Enzymology/biotransformation: substrate for glycosidases (e.g., β-glucosidase/α-rhamnosidase) to study deglycosylation pathways leading to the aglycone; microbial/plant cell biotransformations investigating prenyl modification or glycoside rearrangements.
Chemical modification studies:
Selective acylation/alkylation of phenolic OH groups to modulate lipophilicity.
Acid-catalyzed hydrolysis of glycosidic linkage (methanolic HCl) to access the aglycone for SAR comparisons (conditions under Reaction Conditions).
Protection–deprotection strategies on sugar hydroxyls (e.g., acetylation) for structural elucidation or semi-synthesis.
Analytical method development:
RP-HPLC method validation (linearity, LOD/LOQ) using UV at Band I/II maxima; LC–MS/MS MRM development in negative ESI.
Materials/interaction studies: prenylation enhances hydrophobic interactions; used to probe membrane partitioning and binding to carrier proteins (albumin) in vitro.
Note: No item-specific application validations are provided in the Product Data; examples above are literature/general use cases for this chemical class.
Reaction Conditions
General, literature-based conditions relevant to this class (verify and optimize for your system):
Acidic deglycosylation (to aglycone):
Reagents: 1–2 M HCl in methanol or aqueous methanol (70–90%).
Conditions: reflux 1–4 h; monitor by TLC/HPLC; neutralize and extract with ethyl acetate. Caution: potential for aglycone degradation under strong acid.
Enzymatic deglycosylation:
Enzymes: β-glucosidase and/or α-L-rhamnosidase depending on sugar; pH 5–6, 37–50 °C; aqueous buffer with 1–10% DMSO co-solvent.
Advantage: milder, higher selectivity.
Phenolic O-acylation/alkylation:
Base: K2CO3 or Cs2CO3 (1–2 eq) in acetone/DMF; electrophile: acyl chloride/alkyl halide (1.2–1.5 eq); 0–25 °C to limit over-acylation; protect sugar OHs if required.
Prenyl double bond transformations:
Epoxidation: m-CPBA (1.1 eq) in CH2Cl2, 0 °C to rt, 1–3 h; quench with bicarbonate.
Hydroboration–oxidation: 9-BBN in THF, then H2O2/NaOH; monitor to avoid competing aromatic reactions.
Analytical method development (HPLC):
Column: C18, 3–5 µm.
Mobile phase: water (0.1% formic acid)/acetonitrile or methanol gradient.
Detection: DAD 260–360 nm; MS in negative ESI.
Yields and exact parameters are substrate- and substitution-dependent; no item-specific validations are provided.
Safety and Handling
This product is intended for research use only.
GHS classification, signal word, pictograms, H-statements: Not specified for this item; refer to the SDS for authoritative safety details.
Anticipated hazards (general for polyphenolic glycosides): low volatility solid; may cause irritation to eyes/skin/respiratory tract as dust or solution. Avoid inhalation and contact.
Personal protective equipment: laboratory coat, safety glasses, and appropriate chemical-resistant gloves (e.g., nitrile). Handle powders in a fume hood or ventilated enclosure.
Storage conditions (from Product Data): Store at −20 °C. Protect from moisture and light. Keep container tightly closed.
Incompatibilities (general): strong oxidizers; strong bases/acids can promote hydrolysis or oxidation of phenolic groups. Avoid prolonged exposure to alkaline aqueous media.
Handling tips:
Allow container to equilibrate to room temperature before opening to minimize condensation.
Weigh quickly; reseal promptly under dry atmosphere if feasible.
Prepare concentrated stocks in DMSO or methanol to minimize repeated handling.
First-aid overview (general):
Skin/eye contact: rinse with water for several minutes; remove contaminated clothing; seek medical attention if irritation persists.
Inhalation: move to fresh air; seek medical advice if symptoms occur.
Ingestion: rinse mouth; do not induce vomiting; seek medical attention.
Always consult the SDS for definitive guidance.
Solvent Selection
Icariside F2 is a prenylated flavonoid glycoside with mixed polarity: polar carbohydrate plus a hydrophobic prenylated aglycone.
Polarity/miscibility (general):
Highly soluble in DMSO and DMF; good in hot methanol/ethanol; limited in acetonitrile; poor in water and nonpolar hydrocarbons.
Aqueous work: requires co-solvents (DMSO, ethanol) or solubilizers (cyclodextrins, PEG-400) for mg/mL stocks.
Selection guidance by application:
Bioassays: prepare concentrated DMSO stocks (e.g., 10–50 mM) and dilute into buffer keeping final DMSO ≤0.5–1% v/v.
Analytical HPLC: reversed-phase (C18) with water–acetonitrile or water–methanol and 0.1% formic acid or 5–20 mM ammonium acetate for MS compatibility.
Preparative isolation: methanol/water or ethanol/water gradients; avoid strong base to prevent hydrolysis.
Comparative notes:
DMSO: maximal solubility; excellent for small-volume stock solutions.
Ethanol: greener, miscible; may require warming/sonication.
PEG-400: enhances aqueous delivery in in vitro systems; viscous and UV-absorbing—less ideal for spectroscopic analytics.
Practical tips:
Warm (30–40 °C) and sonicate to assist dissolution; cool before use.
Filter 0.2 µm after dissolution to remove particulates prior to chromatography or bioassay.
Storage and Reconstitution
Storage conditions (from Product Data): Store at −20 °C. Shipments are sent in an ice chest with ice pads. Upon receipt, place immediately at −20 °C.
Protection: keep tightly sealed, desiccated, and protected from light to mitigate phenolic oxidation and hydrolysis.
Reconstitution guidance (general):
Solvents: DMSO (preferred for concentrated stocks), DMF, or methanol/ethanol. Begin with small volumes and sonication if needed.
Typical stock concentrations: 10–50 mM in DMSO (recorded for your lab’s use; not a product specification). Filter sterilize if required for cell-free assays.
Aqueous working solutions: prepare by diluting organic stock into buffer with vigorous mixing; avoid exceeding 0.5–1% DMSO/ethanol in sensitive biological assays.
Stability:
Solid: at −20 °C, dry and protected from light, stability is typically months to years; verify with periodic HPLC.
Solutions: store aliquots at −20 °C; minimize freeze–thaw cycles. DMSO stocks are generally stable for weeks to months when frozen and protected from light; check for precipitation/degradation by HPLC before use.
Aliquoting: prepare single-use aliquots to avoid repeated thawing; allow to warm to room temperature before opening to prevent condensation.
Item-specific shelf life, water content, and purity limits: Not specified for this item; refer to CoA/Spec Sheet.
Structure and Identity
A prenylated flavonoid glycoside isolated from Epimedium species; commonly classified among icariin-derived glycosides.
SKU: I463206
Product name: Icariside F2
CAS: 115009-57-9
InChIKey: 240145 (as provided in Product Data; note: standard InChIKeys are typically 27 characters)
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
Structural features (general, literature-based description for the icariiside class):
Core scaffold: flavonol/flavone-type polyphenolic ring system (C6–C3–C6) bearing multiple phenolic hydroxyls.
Glycosidic linkage: O-glycoside at the 3- or 7-position of the flavonoid core (exact position for F2 should be confirmed from primary literature/CoA).
Prenyl motif: a C5 isoprenyl (3,3-dimethylallyl) substituent on the aromatic ring, increasing lipophilicity and affecting membrane interactions.
Stereochemistry: carbohydrate moiety introduces multiple stereocenters (L-rhamnose or other deoxy/hexose common in Epimedium glycosides). Exact configuration should be verified against the CoA or primary structure report.
2D structure (verbal): two fused benzene-derived rings connected by a heterocyclic pyrone; one ring bears a prenyl substituent; one phenolic oxygen is glycosylated with a deoxy/hexose unit.
Synthetic Utility
Although predominantly used as a natural product standard, Icariside F2 can serve as a substrate for methodological studies and semi-synthesis (general literature context):
Functional groups: multiple phenolic OH groups (nucleophilic/acidic), a glycosidic acetal linkage (acid-labile), conjugated carbonyl (flavone/flavonol), and a prenyl (allylic) substituent amenable to electrophilic additions/oxidations.
Transformations:
Deglycosylation to aglycone via acid hydrolysis or enzymatic glycosidases; subsequent derivatization (methylation, acylation) for SAR.
Selective O-acylation/alkylation of phenols using mild bases (e.g., K2CO3) in polar aprotic solvents; protection strategies with acetyl/Bn groups to direct site-selectivity.
Prenyl modifications: epoxidation of the prenyl double bond (m-CPBA), hydroboration–oxidation, or radical additions for diversification.
Metal-catalyzed C–O or C–C couplings on suitably protected derivatives (e.g., aryl triflate formation from phenols, then Suzuki–Miyaura).
Analytical synthetic value: serves as a comparator for positional isomers and as a chiral probe on the sugar portion in NMR (J-couplings, NOEs) to validate stereochemical assignments.
Note: Selectivity is strongly influenced by hydrogen bonding and chelation on the polyphenolic core; careful protection–deprotection sequences are advised.
Target Specificity
Not applicable—this product is a small-molecule natural product standard, not a biological targeting reagent (e.g., antibody, enzyme, or inhibitor with defined target provided in Product Data). No target, epitope, or species specificity is provided for this item.
Häufig gestellte Fragen
How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 115009-57-9, the molecular formula is C18H26O10, and the molecular weight is 402.39 g/mol. InChIKey NJMQSVWMCODQIP-FQXXIRCGSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Wir verwenden Cookies, um die ordnungsgemäße Funktion der Website sicherzustellen und, soweit zulässig, Ihr Nutzererlebnis zu verbessern. Sie können Ihre Einstellungen jederzeit unter „Einstellungen“ verwalten. Weitere Informationen finden Sie in unserer Cookie-Richtlinie.
Dürfen wir Sie über Rabattaktionen informieren?
Später erinnern
Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.