Indium(III) iodide - anhydrous, ≥99.998% metals basis, Powder , CAS No.13510-35-5

CAS: 13510-35-5 Cat. No.: I485456 Summenformel: InI3 Molekulargewicht: 495.53 EG-Nummer: 236-839-6
Zu bestellen verfügbar
QUALITÄT & REINHEIT Anhydrous Grade ? Anhydrous grade — water removed and packaged dry for moisture-sensitive chemistry. Use in reactions where even trace water would interfere or quench. ≥99.998% metals basis Powder
Synonyms
Indium triiodide
Storage
Room temperature
★
Größe
Deutschland (EU)
USA*
Preis
Menge
1g
I485456-1g
Auf Bestellung · 8–12 Wochen

138,75€

162,18€
Speichern 23,43 € (14.45%)
5g
I485456-5g
Auf Bestellung · 8–12 Wochen

556,13€

648,98€
Speichern 92,85 € (14.31%)
Enter a quantity for the sizes you want to add.

Übersicht

Description

Used to prepare vinyl and methyl indates which undergo regioselective reactions with cinnamyl bromide.

Spezifikationen

Synonyme
Indium triiodide
Spezifikationen & Reinheit
anhydrous, ≥99.998% metals basis, Powder
Storage
Room temperature
Note
Anhydrous Grade
Reinheit
≥99.998% metals basis
Namen und Kennungen
SMILES
IIn(I)I
InChIKey
RMUKCGUDVKEQPL-UHFFFAOYSA-K
InChI
1S/3HI.In/h3*1H;/q;;;+3/p-3
WGK Deutschland
WGK 3
Molekulargewicht
495.53

Erweiterte Daten

Taxonomic Classification

Taxonomy Tree

KingdomInorganic compounds
SuperclassMixed metal/non-metal compounds
KlassePost-transition metal salts
SubclassPost-transition metal iodides
Intermediate Tree Nodes Not available
Direct ParentPost-transition metal iodides
Alternative Parents Inorganic salts  
Molecular FrameworkNot available
Substituents Post-transition metal iodide - Inorganic salt
BeschreibungThis compound belongs to the class of inorganic compounds known as post-transition metal iodides. These are inorganic compounds in which the largest halogen atom is Iodine, and the heaviest metal atom is a post-transition metal.
External Descriptors Not available
Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Chemische und physikalische Eigenschaften
Schmelzpunkt (°C)210°
Sicherheit und Gefahren (GHS)
Piktogramm(e)
GHS07,   GHS08
Signal
Danger
Gefahrenhinweise

H315:Causes skin irritation

H317:May cause an allergic skin reaction

H319:Causes serious eye irritation

H334:May cause allergy or asthma symptoms or breathing difficulties if inhaled

H335:May cause respiratory irritation

H360:May damage fertility or the unborn child

Sicherheitshinweise

P201:Obtain special instructions before use.

P202:Do not handle until all safety precautions have been read and understood.

P261:Avoid breathing dust/fume/gas/mist/vapors/spray.

P264:Wash hands [and …] thoroughly after handling.

P271:Use only outdoors or in a well-ventilated area.

P272:Contaminated work clothing should not be allowed out of the workplace.

P280:Wear protective gloves/protective clothing/eye protection/face protection.

P281:Use personal protective equipment as required.

P285:In case of inadequate ventilation wear respiratory protection.

P333:If skin irritation or rash occurs:

P302+P350:IF ON SKIN: Gently wash with plenty of soap and water.

P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

P308+P311:IF exposed or concerned: Call a POISON CENTER/doctor/...

P342+P311:IF experiencing respiratory symptoms: Call a POISON CENTER/doctor/...

P362+P364:Take off contaminated clothing and wash it before reuse.

P403+P233:Store in a well-ventilated place. Keep container tightly closed.

WGK Deutschland
WGK 3
FAQs und Artikel
Citations of This Product
Lösungsrechner
Bewertungen

Kundenbewertungen

Häufig gestellte Fragen

What does the trace-metals specification mean?
This product is specified at ≥99.998% on a trace-metals basis. That figure describes metallic impurity content rather than overall chemical assay, so it is the relevant specification for ICP-MS, semiconductor and battery applications. Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
What does Anhydrous Grade mean?
Anhydrous Grade indicates that the material has been processed and tested for moisture-sensitive chemistry. Specifications focus on the impurities that affect performance in that application — for example, metal content for electronics, particle size for batteries, refractive index for optics, or moisture content for moisture-sensitive processes.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 13510-35-5, the molecular formula is InI3, and the molecular weight is 495.53 g/mol. InChIKey RMUKCGUDVKEQPL-UHFFFAOYSA-K.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Dürfen wir Sie über Rabattaktionen informieren?

Später erinnern

Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.

Hoppla! Benachrichtigungen sind deaktiviert.