This compound belongs to the class of organic compounds known as pyrimidine nucleosides. These are compounds comprising a pyrimidine base attached to a ribosyl or deoxyribosyl moiety.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Bewertungen
Kundenbewertungen
Application Protocols
No item-specific, validated application protocols are provided in the Product Data.
General guidance (research use only):
Solution preparation: dissolve in water or DMSO to make a concentrated stock; mix gently and, if needed, warm mildly to aid dissolution. Filter (0.22 µm) for particulate removal/sterility.
Synthetic setup: for protection/phosphitylation, dry glassware and solvents; maintain inert atmosphere; confirm completion by LCMS or TLC and NMR.
Analytical QC: verify identity by 1H/13C NMR (ribose anomeric proton ~5.5–6.0 ppm region), MS (M+H+ ≈ 245 for uridine enantiomers, literature), and chiroptical methods (optical rotation, CD) to confirm L-configuration as required.
Refer to the item’s CoA/Spec Sheet and your internal SOPs for method-specific parameters.
Biological Roles
General context (literature):
Uridine (β-D-uridine) is a canonical ribonucleoside in RNA, participating in base pairing and various post-transcriptional modifications.
L-Uridine is the mirror-image enantiomer of natural uridine. In biological systems, macromolecules are generally D-sugar-based; thus, L-nucleosides are typically not recognized by native polymerases, kinases, and nucleoside transporters.
Research relevance of L-uridine:
Probe for stereochemical recognition: used to study enzyme selectivity, transport mechanisms, and binding site chirality by comparing uptake/turnover vs D-uridine.
Building block for mirror-image nucleic acids: enables construction of L-oligonucleotides for biophysical studies (e.g., stability, hybridization behavior with complementary L-strands) and to explore resistance to nucleases in purely research settings.
Receptor/ligand binding studies: L-uridine derivatives can assess chiral discrimination in carbohydrate-recognizing proteins and RNA-binding domains.
Notes:
No medical or clinical claims are made. Any biological discussion here is limited to mechanistic/biochemical context for research use only.
Buffer Applications
Not a buffering agent: L-Uridine is not used as a pH buffer.
Practical guidance (general):
Dissolution: prepare stock solutions in water or compatible buffers (e.g., phosphate, HEPES) depending on downstream assays.
pH considerations: while L-uridine does not provide significant buffering capacity, solution pH can affect solubility and stability of derivatives; maintain neutral to mildly basic conditions unless a specific reaction requires otherwise.
Sterile applications: filter-sterilize solutions (0.22 µm) when used in sterile workflows. Avoid repeated freeze–thaw by aliquoting.
For precise composition, ionic strength, and compatibility with your assay, refer to method-specific SOPs; no item-specific buffer recipes are provided for this product.
Green Alternatives
Context: L-Uridine is a solid substrate rather than a process solvent; green considerations focus on solvent/reagent choices during its use and derivatization.
Greener choices (literature/general):
Solvent selection:
Prefer water or aqueous ethanol for dissolution and benign transformations when feasible.
Replace DMF/NMP with alternative dipolar aprotics (e.g., Cyrene, propylene carbonate) where compatible.
Use 2-MeTHF or ethanol instead of dichloromethane/THF for extractions and workups when polarity allows.
Protection strategies:
Employ recyclable, less toxic protecting groups (e.g., acetonide/carbonates) over silyl groups when conditions permit aqueous workups.
Catalysis:
Favor enzymatic or organocatalytic routes for selective acylation/alkylation in water or mixed green solvents.
Illustrative comparison (general):
DMF vs Cyrene: Similar polarity; Cyrene is bio-based and lower toxicity but has higher viscosity and different reactivity profile.
DCM vs 2-MeTHF: 2-MeTHF offers lower toxicity and better safety profile; note different miscibility with water and peroxide risk mitigation.
Trade-offs:
Highly polar, multi-H-bond substrates like nucleosides may still require strong dipolar aprotics for high-yield steps; pilot testing is recommended.
Pharmaceutical Uses
Scope: This product is supplied strictly for research use only.
General formulation/manufacturing context (literature):
L-uridine is not a common pharmaceutical excipient. In research manufacturing settings, it may serve as:
A chiral reference standard for analytical method development (e.g., chiral HPLC) alongside D-uridine.
A building block/intermediate in the synthesis of mirror-image oligonucleotide constructs investigated in preclinical research.
Regulatory: No pharmacopeial monograph is typically available for L-uridine. When used in processes supporting regulated studies, users should define internal specifications (assay, impurities, residual solvents, enantiomeric purity) and qualify suppliers accordingly.
No therapeutic or clinical claims are made for this product.
Physical Properties
Item-specific (Product Data):
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Literature/General properties for uridine enantiomers (approximate; for reference only):
Physical state: crystalline solid (literature)
Melting point: typically ~160–170 °C (may soften/decompose) (literature)
Solubility: highly soluble in water; sparingly soluble in alcohols; low solubility in aprotic nonpolar solvents (literature)
Hygroscopicity: nucleosides may absorb moisture; handle promptly in ambient air (general guidance)
Notes:
Enantiomers share identical intrinsic physical constants (mp, pKa, solubility profile) in achiral media; values above are therefore used as guidance for L-uridine.
For method validation or regulated work, confirm exact material properties on the item’s CoA/Spec Sheet.
Quality and Grades
Item-specific (Product Data):
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Interpretation and guidance:
When grade/purity are not specified on the label page, consult the CoA/Spec Sheet for assay method (e.g., HPLC, qNMR), residual solvent profile, and identity confirmation (NMR, MS).
Nucleoside quality considerations for synthetic/biochemical use:
Organic/metal impurities: can inhibit coupling or enzymatic steps; review ppm/ppb limits if provided.
Water content: affects weighing accuracy and solution concentration; Karl Fischer values, if available on CoA, guide drying needs.
Optical purity: for L-uridine, enantiomeric excess (ee) or specific rotation is often critical in chiral applications; verify on CoA if reported.
Microbial/endotoxin: typically not specified for research-grade small molecules; if needed, request additional testing.
Stabilizers: None stated for this item. If stabilizers are present in similar products, they should be disclosed on the CoA.
Recommendation: Match the grade to application stringency—e.g., oligonucleotide synthesis typically requires high assay purity and well-documented trace profiles, while general synthetic transformations may be tolerant of broader specs.
Reaction and Applications
Scope: L-Uridine functions as a chiral, polyfunctional building block for nucleoside chemistry and carbohydrate-derived synthesis.
Representative applications (literature/general):
Protection–deprotection sequences:
5′-O-protection (e.g., trityl, silyl) to direct regioselectivity.
2′,3′-diol protection (e.g., TBDMS, TIPDS, cyclic carbonates) to enable selective transformations at 5′.
Phosphorylation and phosphoramidite chemistry:
Conversion to 5′-monophosphate/triesters or 5′-O-(2-cyanoethyl)-N,N-diisopropylphosphoramidites for oligonucleotide assembly (L-series for mirror-image constructs).
Glycosyl chemistry:
Formation of activated sugar derivatives (e.g., 1′-halides, acetates) and N-glycosidic manipulations for base/sugar exchange.
Functionalization of the uracil base:
C5-modification via halogenation, metalation, or cross-coupling (after suitable activation) to introduce labels, lipophilic groups, or handles.
Enzymology and recognition studies:
L-uridine probes enzyme stereoselectivity and nucleoside transporter discrimination, as L-enantiomers are typically not substrates of native (D-selective) enzymes.
Practical tips:
Use dry, oxygen-free conditions when moisture-sensitive reagents (e.g., chlorophosphines, silylating agents) are employed.
Control of regioselectivity at 2′/3′ vs 5′ is achieved via differential protection; monitor by NMR (coupling patterns of ribose protons) and LCMS.
For C5-functionalization, temporary protection of sugar hydroxyls minimizes side reactions and improves crystallinity for purification.
Reaction Conditions
General conditions from literature (guidance only; optimize per substrate and scale):
Protection of 5′-OH (DMT):
Solvent: anhydrous pyridine or dichloromethane with catalytic DMAP.
Temperature/time: 0–25 °C, 0.5–2 h; protect from moisture. Typical isolated yields vary widely (50–85%) depending on protection pattern and workup stringency (literature).
C5-Halogenation of uracil ring:
Solvent: acetic acid or DMF.
Reagents: NIS or I2/oxidant.
Temperature/time: 0–25 °C, 1–6 h; affords 5-iodo derivatives for cross-coupling.
Notes:
L-uridine follows the same reactivity profile as D-uridine under achiral conditions; chiral catalysts/enzymes may differentiate.
Rigorous drying (molecular sieves, inert gas) is critical for high-yield phosphitylations and silylations.
Safety and Handling
Item-specific (Product Data):
GHS Classification: Not specified for this item; refer to SDS.
Signal Word: Not specified for this item; refer to SDS.
H-Statements/Pictograms: Not specified for this item; refer to SDS.
Storage: Store at 2–8 °C, argon charged. Shipped on wet ice.
General laboratory safety (not item-specific; consult SDS for authoritative guidance):
PPE: lab coat, safety glasses, appropriate gloves; avoid inhalation of dust and contact with eyes/skin.
Handling: work in a clean, dry environment. Minimize exposure to ambient moisture; promptly recap containers under inert gas as provided.
Incompatibilities: strong oxidizers and strong acids/bases may degrade nucleosides; avoid prolonged exposure to elevated temperature and light.
First aid (overview): if inhaled, move to fresh air; if on skin/eyes, rinse with water for several minutes; if ingested, rinse mouth. Seek medical attention if irritation persists. Always follow institutional SOPs.
Spills: avoid creating dust; collect mechanically and wipe with water/aqueous cleaner.
Note: This product is for research use only.
Solvent Selection
Applicability: As a highly polar, hydrogen-bonding nucleoside, L-uridine’s dissolution behavior is dominated by strong solute–solvent H-bonding.
General solvent behavior (literature):
Preferred solvents: water and aqueous buffers; DMSO; formamide; hot methanol or ethanol can aid dissolution.
Limited solubility: acetonitrile, acetone, THF, and most nonpolar/aprotic solvents due to multiple H-bond donors/acceptors.
pH effects: increased solubility at slightly basic pH via deprotonation of trace acidic sites; ensure compatibility with downstream steps.
Selection guidance by task:
Biochemical assays: dissolve in water or buffer (e.g., phosphate, HEPES). Filter-sterilize (0.22 µm) if sterility is required.
Organic synthesis: for protection/coupling, use polar aprotic media (DMF, DMSO, NMP) or biphasic systems with phase-transfer catalysis.
Analytical standards: prepare stock in water or DMSO; dilute into mobile phase shortly before use to avoid adsorption or degradation.
Comparison (typical):
Water: highest biocompatibility; fastest dissolution; may require pH adjustment.
DMSO: highest solvating power in organic media; miscible with water; consider downstream DMSO limits.
Methanol/Ethanol: greener than DMF/DMSO; heating assists dissolution; watch for acyl exchange if protecting groups are present.
Storage and Reconstitution
Item-specific (Product Data):
Storage conditions: Store at 2–8 °C, argon charged.
Shipping: Shipped on wet ice.
General guidance (not item-specific; verify with CoA/SDS before use):
Container management: keep tightly closed; purge headspace with inert gas after opening to maintain the argon blanket.
Moisture control: minimize time open to ambient air; consider handling in a dry box if repeated access is expected.
Reconstitution: prepare stock solutions in water or DMSO according to application needs. For long-term storage of solutions, aliquot and freeze to avoid repeated freeze–thaw.
Stability: nucleosides are typically stable as dry solids under cool, dry, inert conditions. In solution, avoid strong acids/bases and high temperatures; use amber vials if photo-liability is a concern.
Always consult the SDS and CoA for item-specific stability, solubility, and compatibility prior to critical work.
Structure and Identity
Overview: L-Uridine is the L-enantiomer of the ribonucleoside uridine, comprising the pyrimidine base uracil N1-glycosidically linked to L-ribofuranose in β-configuration.
Item-specific (Product Data):
CAS: 26287-69-4
InChIKey: 71153
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
Literature/General identity (for reference only):
Common name: L-Uridine (β-L-uridine)
Expected molecular formula (literature): C9H12N2O6 for uridine enantiomers
Expected molecular weight (literature): ~244.20 g/mol for uridine enantiomers
Structural features: uracil (2,4-dioxopyrimidine) ring; β-N1-glycosidic bond to L-ribofuranose; four hydroxyls on sugar (1° at C5′, 2° at C2′/C3′), two carbonyls on base; no formal charge at neutral pH.
2D structure description (general):
A six-membered pyrimidine bearing carbonyls at C2 and C4, N atoms at positions 1 and 3; N1 linked to the anomeric C1′ of a five-membered furanose ring. In the L-series, the sugar stereocenters are the mirror image of natural D-ribose.
Uracil base presents two carbonyls and an N3 site; C5 is amenable to electrophilic substitution and cross-coupling after activation.
Key transformations (literature):
Selective O-protection: 5′-O-DMT or 5′-O-silyl; 2′,3′-O-cyclic carbonates or disiloxanes for differential control.
Phosphorylation: 5′-O-phosphates (mono/di/tri) via POCl3 or phosphoramidite chemistry; subsequent coupling to form phosphate diesters/triesters.
C5-derivatization: halogenation (e.g., 5-iodo L-uridine) followed by Suzuki/Sonogashira/Stille couplings to introduce reporter groups.
Sugar activation: formation of 1′-activated derivatives (acetates/halides) for N-glycosylation strategies or rearrangements.
Retrosynthetic value:
Serves as a chiral pool starting point for L-ribonucleotide libraries and L-oligonucleotide monomers.
Enantiopurity in the sugar moiety propagates through downstream assemblies, avoiding resolution at later stages.
Practical considerations:
Maintain strict anhydrous conditions during phosphitylation and silylation. Monitor by 31P NMR for phosphoramidites and by 1H/13C for protecting group patterns.
Crystallinity often improves after temporary peracylation, facilitating purification of intermediates.
Target Specificity
Not applicable: This product is a small-molecule nucleoside, not an antibody, probe, or biological macromolecule with defined antigen/epitope specificity. No target specificity data are provided in the Product Data.
Häufig gestellte Fragen
What is the purity of this product?
This product is supplied at ≥97% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at 2–8 °C under argon. It is supplied under an argon blanket; reseal under inert gas after each use.
How is this product shipped?
This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 26287-69-4, the molecular formula is C9H12N2O6, and the molecular weight is 244.2 g/mol. InChIKey DRTQHJPVMGBUCF-PSQAKQOGSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Wir verwenden Cookies, um die ordnungsgemäße Funktion der Website sicherzustellen und, soweit zulässig, Ihr Nutzererlebnis zu verbessern. Sie können Ihre Einstellungen jederzeit unter „Einstellungen“ verwalten. Weitere Informationen finden Sie in unserer Cookie-Richtlinie.
Dürfen wir Sie über Rabattaktionen informieren?
Später erinnern
Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.