Lufenuron-C , CAS No.L1421172

CAS: L1421172 Cat. No.: L1421172 Summenformel: C1113C6H8Cl2F8N2O3 Molekulargewicht: 517.11
Zu bestellen verfügbar
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
Größe
Deutschland (EU)
USA*
Preis
Menge
1mg
L1421172-1mg
Auf Bestellung · 8–12 Wochen
Enter a quantity for the sizes you want to add.

Übersicht

Lufenuron- 13 C 6 is a 13 C-labeled Lufenuron. Lufenuron is a lipophilic benzoylurea insecticide and a chitin synthesis inhibitor that can used for flea and fish lice control. Lufenuron inhibits moulting of arthropods.

Spezifikationen

Storage
Store at -20°C
Verschickt in
Ice chest + Ice pads
Dieses Produkt erfordert Kühlkettenversand. Grundversand und andere Economy-Optionen sind nicht verfügbar.
Namen und Kennungen
Molekulargewicht
517.11

Erweiterte Daten

Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Lösungsrechner
Bewertungen

Kundenbewertungen

Application Protocols

No tested application protocols are provided in the Product Data for this SKU.

General handling protocol for small-molecule screening compounds (not item-specific):

  • Stock preparation: Dissolve in dry DMSO to a convenient concentration (e.g., 10–50 mM) based on solubility; vortex and sonicate if needed. Filter through a 0.22 µm PTFE syringe filter if particulate persists and the compound is filter-stable.
  • Aliquoting: Dispense single-use aliquots in amber vials or 96/384-well source plates to avoid repeated freeze–thaw.
  • Assay dilution: Add stock to assay buffer/media to achieve target concentrations while keeping final DMSO ≤0.5–1% v/v. Include vehicle controls matched for solvent percentage.
  • Storage of working solutions: Use promptly or store short-term at 2–8 °C if stability allows; confirm by LC at t0 and after storage.

These are general best practices; consult the CoA/SDS and perform pilot tests to define conditions suitable for your specific assay.

Biological Roles

Item-specific biological target(s) or roles are not provided in the Product Data. Do not assume bioactivity without verifying identity and purity via CoA/SDS and your internal qualification.

General considerations for small-molecule library members:

  • Potential use as a biochemical or cellular probe depends on the scaffold and its known targets in literature. Identity confirmation is a prerequisite for any mechanistic interpretation.
  • If the compound name indicates relation to a known chemotype, consult primary literature for the reported molecular pathways and off-target profiles, then confirm equivalence experimentally.
  • For in vitro work, characterize solvent effects and adsorption losses (e.g., to plastics or serum proteins) and establish concentration–response relationships with appropriate controls.

Important: Research use only. No clinical, diagnostic, or in vivo claims are made or implied for this product.

Buffer Applications

This product is a small-molecule library member and is not a buffering agent. Therefore, conventional buffer system guidance (e.g., phosphate, Tris, HEPES preparation) is not applicable.

Practical note:

  • If preparing assay solutions, dissolve the compound first in a compatible organic co-solvent (commonly DMSO or ACN) and then dilute into your chosen buffer while maintaining a low final organic percentage (typically ≤0.5–1% v/v) to preserve buffer capacity and biological compatibility.
Green Alternatives

Green chemistry considerations are typically applied to solvents, reagents, and process steps. For a screening compound like this item, the main levers are solvent choice, scale minimization, and waste handling.

Greener practice suggestions (general):

  • Prefer water-miscible, lower-toxicity solvents when feasible (e.g., ethanol, isopropanol) instead of chlorinated solvents. For stock solutions, ACN or ethanol may substitute DMSO if solubility and assay tolerance permit.
  • Miniaturize assays (microvolumes in 384/1536-well plates) to reduce solvent use and waste.
  • Use solvent recovery where practical, and segregate halogenated from non-halogenated waste to enable optimal disposal streams.

Illustrative comparison (general, not item-specific):

  • DMSO vs Ethanol: DMSO offers broader solvency but is harder to remove and can interfere at high percentages; ethanol is more benign and easier to evaporate but may have lower solvency for hydrophobic analytes.
  • ACN vs DMF: ACN has a better environmental and analytical profile (easy removal, LC compatibility); DMF is effective but problematic from an EHS perspective.

Because no synthetic transformations are specified for this SKU, greener reagent substitutions are not applicable beyond solvent and workflow optimization.

Pharmaceutical Uses

No pharmacopeial status, excipient role, or formulation use is provided in the Product Data for this item. It is sold strictly for research use only.

General context for small-molecule standards (not item-specific):

  • In preclinical research settings, authenticated small molecules may be used as analytical reference standards for method development, stability-indicating assays, or as system suitability standards in chromatographic methods.
  • Any use in regulated manufacturing or clinical settings requires formal qualification and documentation that are not included with this listing unless explicitly stated in the CoA/specification package.
Physical Properties

Item-specific physical constants are not provided in the Product Data. Do not infer values—please verify via CoA/Spec Sheet.

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Melting point: Not specified for this item; refer to CoA/Spec Sheet.
  • Boiling point: Not specified for this item; refer to CoA/Spec Sheet.
  • Density: Not specified for this item; refer to CoA/Spec Sheet.
  • Refractive index: Not specified for this item; refer to CoA/Spec Sheet.
  • Aqueous solubility: Not specified for this item; refer to CoA/Spec Sheet.
  • Organic solubility: Not specified for this item; refer to CoA/Spec Sheet.
  • LogP / partitioning: Not specified for this item; refer to CoA/Spec Sheet.
  • pKa(s): Not specified for this item; refer to CoA/Spec Sheet.

General guidance for small-molecule library members (literature, not item-specific):

  • Many hydrophobic screening compounds dissolve well in DMSO (10–50 mg/mL) and can then be diluted into assay buffers to ≤0.5% DMSO final to minimize solvent effects.
  • If the compound proves sparingly soluble, consider co-solvent systems (DMSO:H2O, DMSO:buffer, or ethanol:buffer) and gentle warming (≤40 °C) with vortex/sonication. Always confirm chemical stability before heating.
  • For any filtration or LC analysis, pre-wet membranes with compatible solvent to reduce nonspecific adsorption.
Quality and Grades

Item-specific grade/purity is not listed in the Product Data. Please refer to the CoA/Spec Sheet for actual acceptance criteria and test methods.

How to interpret common grades (general guidance):

  • Analytical Reagent (AR) / ACS grade: Specifies minimum assay and limits on key inorganic/organic impurities to meet AR/ACS criteria—useful for analytical workflows.
  • HPLC grade solvents/reagents: Tight control of residue after evaporation and low UV-absorbing impurities; favored for trace analysis and chromatography.
  • BioX/Bioactive screening grade (where applicable): Focus on identity confirmation (NMR/LC–MS), purity by HPLC/UPLC (e.g., ≥95%), and documentation suitable for screening libraries.

Documentation to request/expect for small-molecule library items:

  • Identity confirmation: NMR and/or HRMS; sometimes IR.
  • Purity estimation: HPLC/UPLC chromatogram with gradient/UV wavelength reported.
  • Residual solvents/water: Karl Fischer and GC where relevant.
  • Stabilizers or form: Any salts, hydrates/solvates, or formulated carriers disclosed, if present.

For this SKU (L1421172):

  • Grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
  • Stabilizers/additives: Not specified for this item; refer to CoA/Spec Sheet.
  • Form (solid/powder/solution): Not specified for this item; refer to CoA/Spec Sheet.
Reaction and Applications

This product is listed under “small molecules and compound libraries,” suggesting use primarily as a screening/reference compound rather than as a synthetic reagent.

Research applications (general, not item-specific):

  • Bioassay screening: Preparation of DMSO stocks for HTS or focused panel assays; serial dilution into assay buffers for biochemical or cell-based readouts.
  • Reference standard: Potential use as a system-suitability or retention-time standard in LC/UPLC methods once identity is verified.
  • Mechanistic probes: When structural identity matches a known chemotype, may serve as a comparator/positive control in pathway interrogation experiments.

If synthetic use is intended:

  • Without structural data, there are no specific reaction patterns to recommend. If identity corresponds to a benzoylurea-like scaffold (common for “lufenuron” literature), the molecule would be functionally a target, not a building block, and shows limited reactive handles under mild conditions.

Practical tips:

  • Confirm identity/purity by LC–MS and 1H NMR before critical experiments.
  • Establish solubility/stability in your intended assay medium; run a solvent and vehicle control series.
  • For plate-based work, minimize freeze-thaw by aliquoting concentrated stocks (e.g., 10 mM in DMSO) and storing at −20 °C in sealed vials/plates.
Reaction Conditions

Not applicable in a strict sense because the product is positioned as a library/screening compound rather than a reagent used to catalyze or drive reactions. No item-specific reaction conditions are provided.

If you plan to handle this compound in chemical transformations (general guidance only):

  • Solvent: Choose based on solubility (DMSO/DMF/ACN/EtOH) and stability. Verify by a small-scale trial and analytical follow-up (LC–MS, NMR).
  • Temperature: Start at ambient; if heating is required, assess stability by sampling at intervals. Many complex small molecules decompose under prolonged high heat.
  • Atmosphere: Use inert gas (N2/Ar) where hydrolysis/oxidation is a concern.
  • Workup: Anticipate partitioning behavior; some hydrophobic analytes require salting-out or adsorptive solid-phase cleanup.

Expected yields and kinetics cannot be provided without known structure and reaction class.

Safety and Handling

Hazard information for this specific item is not provided in the Product Data. Always consult the product SDS for authoritative guidance.

  • GHS classification: Not specified for this item; refer to SDS.
  • Signal word: Not specified for this item; refer to SDS.
  • H-statements: Not specified for this item; refer to SDS.
  • Pictograms: Not specified for this item; refer to SDS.

General laboratory precautions (good practice):

  • PPE: Use lab coat, safety glasses or splash goggles, and appropriate chemically resistant gloves (e.g., nitrile). Work in a fume hood to avoid inhalation of dust, aerosols, or solvent vapors.
  • Avoid contact with skin, eyes, and clothing. Prevent inhalation of dust/particles. Do not ingest. Wash hands thoroughly after handling.
  • Storage incompatibilities: Until specific data are confirmed, segregate from strong oxidizers, strong acids/bases, and reactive reducing agents. Keep container tightly closed to minimize moisture and air exposure.
  • Spill/accident response: For small spills, absorb with inert material (e.g., vermiculite), collect for disposal, and ventilate the area. For skin/eye contact, rinse with water for at least 15 minutes and seek medical attention per SDS guidance.
  • Waste: Dispose of contents/container according to local/regional regulations and institutional chemical hygiene plans.

Research use only. Not for human or veterinary use.

Solvent Selection

Because no solubility or polarity information is provided for this item, begin with a tiered solvent-screen protocol commonly used for small-molecule library materials.

Recommended stepwise approach (general, not item-specific):

  • Primary solvent: DMSO. Attempt 10–50 mg/mL stock at room temperature with brief sonication. If hazy, warm gently (≤40 °C) and re-sonicate.
  • Secondary options: DMF, acetonitrile, methanol, ethanol, isopropanol, ethyl acetate, acetone. Evaluate clarity and stability over 24–48 h.
  • Aqueous workup: Dilute DMSO or ACN stocks into buffered aqueous media to final organic ≤0.5–1% v/v to minimize assay interference. Use surfactant only if your assay tolerates it.
  • For nonpolar materials: Try chlorinated solvents (DCM, CHCl3) or toluene/MTBE for synthetic manipulations, then exchange to polar aprotic (ACN, DMF) if necessary for analysis.

Small comparison (general):

  • DMSO: Broad solvency, high bp; may affect some bioassays at >0.5%.
  • DMF: Good solvency; hygroscopic; more challenging to remove.
  • ACN: LC-friendly; moderate solvency; low viscosity.

Always confirm chemical stability in the chosen solvent by short-term LC or NMR checks.

Storage and Reconstitution

Item-specific storage information provided:

  • Storage conditions: Store at −20 °C.
  • Shipping: Shipped in ice chest with ice pads.

Additional guidance (general, not item-specific):

  • Container: Keep tightly closed in original, inert packaging. Protect from light and moisture unless the CoA indicates otherwise.
  • Freeze–thaw: Minimize cycles by preparing single-use aliquots. Allow vials to equilibrate to room temperature in a desiccated environment before opening to limit moisture condensation.
  • Reconstitution: If the solid form is supplied, dissolve first in a dry, compatible solvent (commonly DMSO) to prepare a concentrated stock. Filter if necessary and if the compound is not adsorbed/degraded by the membrane (PTFE/nylon).
  • Working solutions: Prepare fresh as needed. For aqueous dilutions, add organic stock slowly with mixing to avoid precipitation. Verify clarity and stability before use.
  • Stability: Not specified for this item; refer to CoA/Spec Sheet for any known degradation pathways, retest periods, or stability-indicating methods.

Research use only. Not for human or veterinary use.

Structure and Identity

Brief overview: This catalog entry is named “Lufenuron-C,” but no structural identifiers are provided in the Product Data. Accordingly, item-specific structural details cannot be confirmed here.

  • SKU: L1421172
  • Product name: Lufenuron-C
  • CAS: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • InChIKey: Not specified for this item; refer to CoA/Spec Sheet.

Structural features (general note):

  • Item-specific functional groups, ring systems, or stereochemistry are not provided. Please consult the Certificate of Analysis (CoA) or product specification sheet for definitive identity data.

Contextual literature note (general, not item-specific):

  • The name “Lufenuron” typically refers in literature to a benzoylurea-class small molecule used as a biochemical tool in arthropod chitin-biosynthesis studies. However, because this listing does not include identifiers, do not assume equivalence; verify with the CoA or vendor support before use in research workflows.
Synthetic Utility

No structural or functional-group information is provided for this item; thus, specific synthetic transformations or reactivity cannot be recommended.

General guidance (when treating small-molecule library members as targets rather than reagents):

  • Such compounds are typically endpoints of synthesis and are not designed as versatile building blocks. If derivatization is desired, first determine the presence of modifiable positions (e.g., free amines, phenols, halides) by full structural elucidation.
  • If the scaffold corresponds to a highly substituted, functionally dense framework (as is common for many bioactives), chemoselective approaches and protecting-group strategies may be necessary for any downstream modifications.

Actionable recommendation: Confirm exact structure via CoA or vendor support before planning synthetic manipulations.

Target Specificity

No biological target, epitope, or specificity data are provided for this item. There is no antibody/biologic information associated with this SKU.

  • Target/Pathway: Not specified for this item; refer to CoA/Spec Sheet and primary literature if applicable.
  • Species reactivity/Selectivity: Not specified for this item; refer to CoA/Spec Sheet.

Recommendation: If your work requires a defined target engagement profile, confirm identity and then determine activity via in-house assays or consult peer-reviewed sources for the exact compound (same structure, salt form, and stereochemistry).

Dürfen wir Sie über Rabattaktionen informieren?

Später erinnern

Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.

Hoppla! Benachrichtigungen sind deaktiviert.