Membrane Red Probe (AIE) - BioReagent, Biological Stain, for microscopy, ≥98%(HPLC), 10mM in DMSO , CAS No.A1456411

CAS: A1456411 Cat. No.: A1456411 Summenformel: C35H28N5S2 Molekulargewicht: 527.16
Zu bestellen verfügbar
QUALITÄT & REINHEIT BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Biological Stain ? Biological stain grade — dyes characterized for staining cells and tissues. Use in histology and microscopy where staining consistency matters. for Microscopy ? Microscopy grade — reagents/stains suited to sample prep and imaging. Use in microscopy where clarity and low background are needed. ≥98%(HPLC) 10mM in DMSO
Storage
Protected from light,Store at -20°C,Avoid repeated freezing and thawing
Shipped In
Ice chest + Ice pads
Application
Cell Staining
★
Größe
Deutschland (EU)
USA*
Preis
Menge
10μl
A1456411-10μl
Auf Bestellung · 8–12 Wochen
69,33€
5×10μl
A1456411-5×10μl
Auf Bestellung · 8–12 Wochen
294,94€
10×10μl
A1456411-10×10μl
Auf Bestellung · 8–12 Wochen
546,59€
Enter a quantity for the sizes you want to add.

Übersicht

AIE Membrane Red Probe is a triphenylamine derivative developed based on the AIE principle and has typical AIE characteristics. The product only needs to be simply incubated with cells to label the cell membrane.

Product Characteristics

AIE Membrane Red Probe has excellent aggregation-induced emission properties and can specifically label the cell membranes of various cells. Due to the change in the aggregation state after binding to the cell membrane, its fluorescence intensity will undergo extremely obvious changes, while the fluorescent probes that do not bind to the cell membrane basically do not emit fluorescent signals.


Figure 1. Laser confocal imaging effect diagram on HeLa cells

Different from common dyes, AIE Membrane Red Probe can be excited by an excitation wavelength of 488 nm, and has a large Stokes shift, which can be clearly distinguished from other dyes, reducing the possibility of monochromatic color in imaging. At the same time, AIE Membrane Red Probe has good biocompatibility and high imaging concentration, and can still ensure stable fluorescent signal output in the state of multiple scans, which is very suitable for multiple imaging.

Product Properties

Molecular Weight527.16 g/mol
Purity> 98% (HPLC)
Working Concentration5 - 10 μM
Full width at half maximum550 nm - 690 nm
Maximum Absorption/Emission Wavelength (nm)λabs = 493 nm / Em = 610 nm

Product Advantages

1.Relatively low cytotoxicity, suitable for live cell and fixed cell imaging;

2.Strong anti-photobleaching ability; after 40 laser scans totaling 15 minutes, the emitted fluorescence intensity remains unchanged;

3.Low background noise, enabling rapid imaging.

Experimental Methods

1.Preparation of stock dye solution: After brief centrifugation, aliquot the dye solution appropriately and store it in the dark at -20°C or lower. The concentration of the stock solution is 10 mM;

2.Preparation of working dye solution: Take 1 μL of AIE Membrane Red Probe stock solution and add it to 1-2 mL of cell culture medium or an appropriate buffer (such as PBS) to obtain an AIE Membrane Red Probe working solution with a dye concentration of 5-10 μM;

3.Cell staining: Incubate adherent cells with an appropriate amount of the working solution for 30 minutes (preferably in a cell culture incubator), and wash with PBS three times; for fixed cells, after cell fixation, incubate the fixed cells with an appropriate amount of the working solution for 10 minutes, and wash with PBS three times; after staining, observe with a confocal fluorescence microscope or a fluorescence microscope, set the excitation wavelength to 488 nm, and collect signals at 600-700 nm.

Precautions

1.Centrifuge briefly before use;

2.When using for the first time, prepare the mother solution, aliquot it, and store at -20°C to avoid repeated freezing and thawing;

3.For your safety and health, please wear a lab coat and disposable gloves;

4.This product is not suitable for fixed cells that have undergone permeabilization treatment;

5.This product is only for scientific research use.


Spezifikationen

Spezifikationen & Reinheit
BioReagent, Biological Stain, for microscopy, ≥98%(HPLC), 10mM in DMSO
Stabilität und Lagerung
Store at -20℃ long term (1 year). Avoid freeze/thaw cycle. Store in the dark.
Storage
Protected from light,Store at -20°C,Avoid repeated freezing and thawing
Verschickt in
Ice chest + Ice pads
Dieses Produkt erfordert Kühlkettenversand. Grundversand und andere Economy-Optionen sind nicht verfügbar.
Note
Biological Stain, BioReagent, für die Mikroskopie
Reinheit
≥98%(HPLC)
Product Line
Biologische Produkte
Namen und Kennungen
Molekulargewicht
527.16

Erweiterte Daten

Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDatumArtikel
ZJ25F0927866ZJ25F0927866Certificate of AnalysisAug 09, 2026 A1456411
FAQs und Artikel
Lösungsrechner
Bewertungen

Kundenbewertungen

Dürfen wir Sie über Rabattaktionen informieren?

Später erinnern

Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.

Hoppla! Benachrichtigungen sind deaktiviert.