Methoxy PEG dithiol NHS - MW 5000 Da

Cat. No.: M163954
Zu bestellen verfügbar
QUALITÄT & REINHEIT MW 5000 Da
Storage
Store at -20°C,Argon charged
Shipped In
Ice chest + Ice pads
★
Größe
Deutschland (EU)
USA*
Preis
Menge
100mg
M163954-100mg
—
2 Auf Lager

102,31€

119,66€
Speichern 17,35 € (14.50%)
500mg
M163954-500mg
—
1 Auf Lager

303,62€

354,82€
Speichern 51,20 € (14.43%)
Enter a quantity for the sizes you want to add.

Übersicht

dithio NHS functionalized polyethylene glycol (PEG-S-S-NHS) is a reducing reagent cleavable and amine (-NH2) reactive PEG derivative that can be used to modify protein, peptide or any other material surfaces with their available amino groups. Dithiol-NHS esters react with primary amine groups at pH 7~8.5 to form stable amide bonds, meanwhile, disulfide bond can be cleaved by DTT, TCEP and other disulfide bond reducing reagents.

Spezifikationen

Spezifikationen & Reinheit
MW 5000 Da
Storage
Store at -20°C,Argon charged
Verschickt in
Ice chest + Ice pads
Dieses Produkt erfordert Kühlkettenversand. Grundversand und andere Economy-Optionen sind nicht verfügbar.

Erweiterte Daten

Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

3 results found

Lot NumberCertificate TypeDatumArtikel
G2403261G2403261Certificate of AnalysisJun 05, 2024 M163954
G2403262G2403262Certificate of AnalysisJun 05, 2024 M163954
G2403263G2403263Certificate of AnalysisJun 05, 2024 M163954
Chemische und physikalische Eigenschaften
LöslichkeitSolubility: 10 mg/mL, clear in water, chloroform, DMSO.
EmpfindlichkeitMoisture Sensitive
FAQs und Artikel
Lösungsrechner
Bewertungen

Kundenbewertungen

Application Protocols

The following general protocols illustrate common use-cases. Adjust to your system and consult the CoA for any item-specific constraints.

A) Amine coupling via NHS (protein conjugation example):

  1. Prepare protein in PBS or HEPES, pH 7.4 (no primary amines in buffer). Concentration 1–10 mg/mL.
  2. Dissolve Methoxy PEG dithiol NHS in anhydrous DMSO at 10–100 mM under argon.
  3. Add reagent to protein to achieve the desired molar ratio (e.g., 3–10 equiv per lysine target). Mix gently at 20–25°C for 30–60 min.
  4. Quench remaining NHS with 20–50 mM ethanolamine, pH 8.0, 10 min.
  5. Purify by desalting column or SEC. Analyze substitution by TNBS/OPA (amines) and SEC-MALS.

B) Thiol–maleimide coupling (second step):

  1. If needed, reduce thiols with minimal TCEP, then remove excess (desalting).
  2. Buffer exchange product into pH 6.8–7.2 phosphate buffer with 1 mM EDTA, degassed.
  3. Add maleimide-bearing partner (1.1–2 equiv per thiol). Incubate 15–60 min at RT.
  4. Purify and verify conjugation by Ellman’s assay (disappearance of free –SH) and appropriate spectroscopy.

C) Gold surface functionalization (materials example):

  1. Clean Au substrate; immerse in 0.1–1 mM solution of the PEG dithiol reagent in ethanol or DMSO under inert atmosphere for 2–12 h.
  2. Rinse thoroughly; proceed with amine coupling of surface-presented NHS groups to amine ligands in buffered aqueous solution.

Notes: Times, stoichiometries, and concentrations are starting points from literature; optimize empirically. Item-specific activity loading is not provided here.

Biological Roles

Item-specific biological data: Not specified for this item; refer to CoA/Spec Sheet.

General context (biochemistry/literature):

  • PEG is biocompatible and widely used to modulate the solubility, circulation behavior, and steric shielding of conjugates (“PEGylation”). The methoxy cap provides an inert terminus that reduces nonspecific interactions.
  • The NHS handle targets primary amines (e.g., lysine ε-NH2) to form stable amide linkages on proteins, peptides, and amine-functionalized biomaterials.
  • The dithiol motif affords two thiol groups capable of reacting with cysteine residues or maleimide-bearing ligands, or forming disulfide bridges that can be engineered for redox-responsive behavior in vitro.
  • Orthogonality: Amine-reactive NHS chemistry is largely orthogonal to thiol conjugation (maleimide/thiol–ene) under controlled pH, allowing stepwise assembly of complex bioconjugates.
  • Spacer effect: The PEG chain confers conformational flexibility and hydration, often reducing immunogenic recognition and protein aggregation in research settings.

Use limitations: This product is labeled “For research use only” and is not intended for diagnostic, therapeutic, or clinical applications. Any cellular or in vivo experimentation should be accompanied by appropriate controls and validation of conjugation efficiency, hydrolysis rates, and potential off-target modifications (e.g., lysine heterogeneity on proteins).

Buffer Applications

While the reagent itself is not a buffer, successful use depends critically on buffer choice, especially for NHS–amine coupling and subsequent thiol reactions (literature guidance):

  • Avoid primary amine buffers during NHS coupling: Do not use Tris, glycine, or buffers containing ethanolamine, as these will quench NHS.
  • Recommended for NHS coupling: PBS, HEPES, or phosphate buffers at pH 7.2–7.8; carbonate/bicarbonate at pH 8.3–8.6 for faster rates (with increased hydrolysis risk). Maintain ionic strength ~100–200 mM to preserve protein stability.
  • Concentration and timing: Prepare fresh solutions; limit aqueous exposure of the NHS ester to ≤1–2 hours total before quenching/unreacted reagent removal.
  • For thiol–maleimide coupling: Use pH 6.5–7.5 in buffers devoid of competing thiols; include EDTA (0.5–5 mM) to chelate trace metals that catalyze thiol oxidation. Degas buffers and maintain inert headspace.
  • Reducing agents: TCEP is compatible with maleimide reactions at low concentrations; avoid DTT/β-mercaptoethanol during maleimide coupling as they compete for the thiol.
  • Quenching and cleanup: After NHS coupling, unreacted active ester can be quenched with ethanolamine (post-coupling), and products purified by desalting columns, dialysis, SEC, or spin filtration depending on size.

Item-specific buffer constraints or recipes: Not specified for this item; consult your experimental system and CoA if available.

Green Alternatives

Greener handling focuses on solvent and process choices, as the reagent functionality (NHS/thiol) is intrinsically dictated by the use-case.

  • Prefer DMSO over DMF for stock solutions where feasible; DMSO has a more favorable safety and regulatory profile. Ensure water content is minimized to preserve NHS.
  • Use aqueous buffers when possible for the coupling step, optimizing pH and time to limit hydrolysis. Degassed PBS or HEPES at pH 7.2–7.8 is often sufficient for protein conjugation.
  • For organic-phase workflows (surface or polymer coupling), consider 2-methyltetrahydrofuran (2-MeTHF) or ethyl acetate instead of chlorinated solvents, provided solubility and reaction rates are acceptable (literature).
  • Implement microscale, high-concentration workflows to reduce solvent volumes, and employ single-use aliquots to minimize waste from degraded material.
  • Energy efficiency: Conduct reactions at ambient temperature when compatible; NHS–amine coupling generally proceeds without heating.

Balanced trade-offs (literature):

  • DMSO is greener but can act as a mild nucleophile under strong activation; for NHS esters, this is typically negligible at room temperature.
  • Aqueous buffer use is ideal for biomolecules but accelerates NHS hydrolysis; tighter time control and slight pH optimization (7.4–8.0) mitigate this.
  • Replacement of chlorinated solvents may reduce dissolution rates for some PEG chain lengths; small solubility screens can guide selection.

Note: No item-specific solvent restrictions are provided; validate greener substitutions with a small pilot run.

Pharmaceutical Uses

Regulatory/compendial status and GMP grade: Not specified for this item; refer to CoA/Spec Sheet.

General formulation/manufacturing context (no therapeutic claims):

  • PEGylation linkers such as methoxy-PEG derivatives are used in R&D to adjust solubility and reduce aggregation of proteins, peptides, and particles. NHS handles enable formation of amide linkages to lysine residues or amine-terminated excipients; thiols enable subsequent site-directed attachments or reversible disulfide linkages in process development.
  • Excipient-like roles in research: As a hydrophilic spacer, PEG can reduce nonspecific adsorption to process equipment and matrices. Methoxy capping helps limit unintended crosslinking by providing a nonreactive end.
  • Surface engineering: Dithiol groups can anchor to noble metals (e.g., Au) in device prototyping, while NHS enables attachment of amine-bearing ligands, creating antifouling or biofunctional coatings for research devices.
  • Process considerations: Residual reactive ester must be thoroughly removed or quenched post-process to avoid downstream reactions. Validate leachables/extractables and residual solvent levels for any translational work.
  • Analytical controls: Monitor degree of substitution by SEC-MALS, LC-MS (if MW permits), Ellman’s assay (thiol), hydroxylamine or TNBS assays (active ester/amine), and NMR to confirm conjugation.

Note: This product is for research use only. No claims are made regarding clinical suitability, pharmacopoeial compliance, or therapeutic performance.

Physical Properties

Item-specific numeric specifications (mp, bp, density, refractive index, UV cutoff, metals, residual solvents): Not specified for this item; refer to CoA/Spec Sheet.

General physical characteristics (literature, typical for PEG conjugates):

  • Physical state: PEG linkers are commonly solids ranging from glassy to waxy depending on chain length and functional loading. NHS-functional PEGs are often off-white solids.
  • Hygroscopicity: PEGs and NHS esters can be moisture-sensitive; NHS esters hydrolyze in aqueous environments, especially above neutral pH.
  • Solubility profile: High solubility in water and polar organics such as DMSO and DMF; solubility in alcohols (MeOH, EtOH) and acetonitrile is typically good; limited solubility in nonpolar hydrocarbons (literature).
  • Odor: Thiol-containing materials may exhibit a sulfurous odor; odor intensity depends on thiol exposure and volatility (literature).
  • Viscosity: Solutions in water or DMSO can be viscous at high concentrations due to the PEG chain (literature).

Stability considerations (literature):

  • NHS groups are destabilized by water and bases; hydrolysis competes with amine coupling. Short exposures to buffered aqueous media at pH ~7.2–8.5 are customary.
  • Thiols readily oxidize to disulfides upon exposure to air/oxygen; inert atmosphere handling and addition of reducing agents (e.g., TCEP) are common.
  • PEG backbones are generally stable thermally and oxidatively under mild lab conditions, but functional groups dictate handling.

Note: For any batch-specific values (MW, substitution, polydispersity), consult the product CoA.

Quality and Grades

Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.

How to interpret quality for PEG linkers (general guidance for professionals):

  • Molecular weight (MW) and polydispersity (Đ): PEG materials are typically supplied as average MW distributions. Verify the target MW and Đ by GPC/SEC if critical for your application.
  • Functional substitution: For multifunctional PEGs, confirm the degree of functionalization (DF) per polymer chain (e.g., moles of NHS and thiol per mole PEG) via NMR, Ellman’s assay (thiol), and active ester assays. Batch CoAs may list “functional content” in μmol/g.
  • Residual solvents/metals: If sensitive applications (bioconjugation) demand it, request data on residual solvents, catalysts, and bioburden/endotoxin. Item-specific limits are not provided here.
  • Stability of handles: Assess NHS content (active ester %) upon receipt and after storage; NHS hydrolysis decreases coupling efficiency. Evaluate free thiol content vs. disulfide by Ellman’s or LC-MS.
  • UV/fluorescence background: For analytical detection, low background absorbance/fluorescence is preferred; HPLC profiles can reveal impurities. No item-specific UV cutoffs are provided here.
  • Documentation: For regulated or translational research, seek a detailed specification (CoA) including MW, Đ, assay for NHS activity, free thiol %, water content (KF), and recommended storage/retention time.

Bottom line: This product’s exact grade and numeric specifications are not listed here; rely on the batch CoA/Spec Sheet for acceptance criteria and incoming QC.

Reaction and Applications

This multifunctional PEG is designed for orthogonal bioconjugation and materials coupling. While item-specific stoichiometry is not provided, the functional handles (NHS and dithiol) enable the following (literature/practice):

  • Amine-selective coupling via NHS: Rapid formation of amide bonds with primary amines (e.g., lysine residues on proteins, amine-terminated surfaces/polymers). Optimal near pH 7.2–8.5 and in amine-free buffers. Side reactions include hydrolysis to the corresponding acid.
  • Thiol-based chemistry: The dithiol can undergo:
    • Conjugation to maleimides (Michael addition) at pH ~6.5–7.5.
    • Thiol–ene reactions under radical initiation for polymer crosslinking.
    • Disulfide exchange with activated disulfides, enabling reversible linkages.
    • Gold–thiol (Au–S) self-assembly for surface immobilization on Au.
  • Spacer function: The PEG chain imparts water solubility, reduces nonspecific adsorption, and adds controlled spacing between conjugation partners (stealth effect).
  • Surface and hydrogel modification: Introduction of amine-reactive sites onto surfaces, followed by thiol-mediated crosslinking to form hydrogels, films, or monolayers with bioinert backbones.
  • Sequence of operations: Commonly, amine coupling via NHS is performed first (to capture the more labile handle), followed by thiol conjugation under reducing, oxygen-free conditions.

Practical tips:

  • Use freshly prepared solutions; limit aqueous exposure before coupling.
  • Degas buffers and purge headspace with inert gas to protect thiols.
  • Quantify thiol content (Ellman’s) and active ester (hydroxylamine assay) to plan stoichiometry.
  • Avoid primary amine buffers (Tris, glycine) until after NHS coupling is complete.
Reaction Conditions

General conditions for common transformations (literature guidance; adjust empirically):

  1. NHS–amine coupling (amide formation):
  • Solvent: Aqueous buffer (PBS, HEPES) pH 7.2–7.8 or carbonate buffer pH 8.3–8.6; introduce reagent from a dry DMSO/DMF stock. Avoid primary amine buffers.
  • Temperature/time: 20–25°C for 30–120 min typically; cooler temperatures for labile proteins; longer times can increase hydrolysis.
  • Stoichiometry: 1.1–10 equiv of NHS-PEG reagent per accessible amine depending on target density; monitor by TNBS/OPA assay for remaining amines.
  • Additives: Optional 0.5–5 mM EDTA; avoid excess base.
  1. Thiol–maleimide conjugation:
  • Solvent/buffer: pH 6.5–7.5 buffer (e.g., PBS, phosphate) with degassing; introduce thiol component under inert gas.
  • Temperature/time: 20–25°C, 15–120 min; reaction is rapid at neutral pH.
  • Reducing conditions: Pre-reduce disulfides with TCEP (sub-stoichiometric) if needed; remove excess before coupling if it interferes.
  1. Disulfide formation/exchange:
  • Conditions: Mild oxidants (air/O2, DMSO trace, or iodine at low equivalents) for formation; pH 7–8. For exchange, use activated disulfides in neutral buffer.
  1. Thiol–ene click:
  • Conditions: Radical source (photoinitiator or AIBN), suitable solvent (DMSO/MeOH/water mixtures), ambient to 60°C depending on system.

Workup and analysis:

  • Quench unreacted NHS after coupling (e.g., ethanolamine).
  • Purify by SEC, dialysis, or spin filtration; analyze by SEC-MALS, Ellman’s (thiol), and MS/NMR when applicable.

Item-specific rates, yields, and constants: Not specified for this item; refer to literature precedents and pilot experiments.

Safety and Handling

GHS/CLP item-specific data (signal word, H/P statements, pictograms, classification): Not specified for this item; refer to SDS.

General safety guidance for PEG NHS/thiol reagents (literature/practice):

  • Hazards: NHS esters are irritants; thiols may cause skin/eye irritation and can have strong odors. Dusts/particulates may cause respiratory irritation.
  • PPE: Use lab coat, safety glasses or goggles, and suitable chemical-resistant gloves (e.g., nitrile). Handle powders in a fume hood to avoid inhalation and to disperse odor.
  • Atmosphere/Moisture control: Open containers under dry, inert gas to minimize NHS hydrolysis and thiol oxidation. Quickly recap and purge headspace with argon or nitrogen.
  • Incompatibilities: Avoid strong bases/acids in aqueous media (accelerates NHS hydrolysis), strong oxidizers (oxidize thiols), and nucleophilic amine buffers (consume NHS esters).
  • First aid (overview; defer to SDS):
    • Skin/eye contact: Rinse with water for at least 15 minutes; remove contaminated clothing; seek medical evaluation if irritation persists.
    • Inhalation: Move to fresh air; seek medical attention if symptoms occur.
    • Ingestion: Rinse mouth; do not induce vomiting; seek medical attention.
  • Spill response: Avoid dust generation; collect solids with disposable tools and place in compatible container. For solutions, absorb with inert material.
  • Waste: Dispose in accordance with institutional and local regulations for organic reagents containing reactive esters and thiols.

Storage and shipping (from Product Data):

  • Store at -20°C, argon charged.
  • Shipped in an ice chest with ice pads to limit hydrolysis and oxidation during transit.
Solvent Selection

Solvent guidance for handling and conjugation (literature/practice):

  • Polarity: PEG linkers dissolve well in polar aprotic solvents (DMSO, DMF, acetonitrile) and in aqueous buffers; solubility in alcohols is typically good. Nonpolar solvents are generally poor choices.
  • NHS stability: For stock solutions, prefer anhydrous, aprotic solvents (DMSO or DMF). Introduce to aqueous buffers only immediately prior to amine coupling to minimize hydrolysis.
  • Thiol preservation: To limit oxidation, work in degassed solvents under inert gas; adding a small amount of TCEP (non-thiol reducing agent) to aqueous solutions can maintain –SH without competing in thiol–maleimide reactions.

Typical choices and use-cases (literature):

  • DMSO (dry, oxygen-free): High solubility, biocompatible with many biomolecules upon dilution; excellent for preparing concentrated stocks for immediate dilution into buffer.
  • DMF (anhydrous): Similar to DMSO; widely used for small-molecule couplings and surface functionalization; easy to dry and handle under inert atmosphere.
  • Aqueous buffers (PBS, HEPES, carbonate, pH ~7.2–8.5): Use freshly prepared, amine-free buffers for NHS reactions; minimize residence time (<1–2 h) to reduce hydrolysis.
  • Alcohols (MeOH/EtOH, anhydrous): Can be used for intermediate handling or surface work; avoid prolonged exposure if NHS hydrolysis is a concern.

Comparison (general):

  • DMSO vs DMF: DMSO is greener and more biocompatible on dilution; DMF can give faster dissolution for some PEGs but is more regulated.
  • Aqueous media: Essential for bioconjugation with proteins but must be carefully buffered and timed to protect the NHS functionality.
Storage and Reconstitution

Storage (from Product Data):

  • Store at -20°C, argon charged.
  • Shipments are sent in an ice chest with ice pads to maintain low temperature during transit.

Best practices (literature/practical guidance):

  • Protect from moisture and air. Keep in original, tightly sealed container with desiccant. If frequently accessed, consider storage in a glovebox or use of argon backfill.
  • Light protection is advisable for NHS esters and thiols.
  • For working stocks, dissolve in anhydrous DMSO or DMF under inert gas. Filter (0.2 μm) if sterile stock is required for bioconjugation workflows.
  • Prepare single-use aliquots to avoid repeated freeze–thaw and headspace moisture ingress. Store aliquots at -20°C under inert gas.
  • Thawing: Warm to room temperature before opening to prevent condensation. Briefly centrifuge to collect material before opening.
  • Aqueous solutions: Prepare immediately before use; limit to ≤1–2 h at room temperature to reduce NHS hydrolysis and thiol oxidation. Degas buffers and maintain inert headspace when possible.
  • Stability/shelf-life: Not specified for this item; monitor performance by assessing active ester content and free thiol content over time.

Reconstitution details specific to concentration and solvent choice: Not specified for this item; select solvent based on application (DMSO/DMF for stocks; appropriate amine-free buffer for immediate NHS coupling).

Structure and Identity

Item-specific identifiers (formula, exact MW, CAS, SMILES, InChIKey): Not specified for this item; refer to CoA/Spec Sheet.

Overview (general structural description, literature):

  • The name “Methoxy PEG dithiol NHS” denotes a multifunctional polyethylene glycol (PEG) derivative combining three functional motifs on a PEG backbone:
    • A terminal or pendant methoxy (–O–CH3) cap that is inert under most conjugation conditions and imparts hydrophilicity and stealth character.
    • One or more thiol (–SH) groups (denoted “dithiol”), capable of Michael additions to maleimides, thiol–ene couplings, and disulfide formation with cysteine or other thiols.
    • An N-hydroxysuccinimide (NHS)–activated ester that reacts selectively with primary amines to form stable amide bonds.
  • PEG architecture may be linear or branched depending on manufacturer design; the precise arrangement (e.g., heterobifunctional vs. multifunctional) and the average PEG chain length (n) determine the exact molecular weight distribution.
  • Typical functional group set (literature):
    • Polyether backbone [–CH2–CH2–O–]n.
    • Methoxy terminus (nonreactive end-capping).
    • Succinimide ring as part of the NHS-activated carbonate/ester linkage.
    • Two thiols (dithiol), which may be terminal or pendant; disulfide formation possible upon oxidation.

2D structural features in words (literature): A repeating ethylene oxide chain terminated at one site with a methoxy group, containing an NHS-activated ester handle for amine coupling, and bearing two thiol functionalities available for thiol chemistry. Exact regiochemistry and substitution pattern are item-specific and not provided here.

Synthetic Utility

Functional group strategy (literature):

  • NHS ester: Efficient activation for coupling to primary amines to form amides under mild, near-neutral conditions. Useful for installing PEG chains onto amine-terminated small molecules, polymers, or surfaces.
  • Dithiol: Provides two thiol sites for subsequent transformations—maleimide addition, thiol–ene click, disulfide formation/exchange, or Au–S surface immobilization—enabling bifunctional or crosslinking strategies.
  • Methoxy-capped PEG: Inert end that minimizes overfunctionalization and imparts solubility/stealth.

Applications:

  • Stepwise heterobifunctional conjugation: First, NHS–amine linkage to capture labile NHS, then thiol coupling to a maleimide-bearing partner to yield a defined conjugate with a hydrophilic spacer.
  • Polymer/materials modification: Grafting PEG onto amine-rich substrates (polyethyleneimine, chitosan, polylysine), then using thiols to crosslink or attach bioactive thiol-reactive moieties.
  • Redox-responsive constructs: Exploit thiol/disulfide chemistry to create linkages that can be cleaved under reducing conditions in vitro, enabling triggerable release in model systems.
  • Surface chemistry: Formation of thiol SAMs on gold, followed by amine-reactive coupling to immobilize biomolecules at controlled densities.

Practical notes:

  • Maintain NHS integrity by minimizing aqueous exposure pre-coupling; use anhydrous DMSO/DMF stocks.
  • Keep thiols reduced (TCEP) and exclude oxygen; verify free –SH equivalents prior to maleimide coupling.
  • Characterize products by NMR (amide formation signals), SEC/GPC (shift in MW), and FTIR (succinimide vs. carboxylate signals) as appropriate.

Item-specific reactivity parameters and loading: Not specified; consult CoA.

Target Specificity

Not applicable. This product is a chemical linker/reagent, not a biological targeting agent or antibody. No antigen, clone, isotype, or species reactivity is associated with this item.

For biochemical selectivity (general):

  • The NHS group is broadly reactive toward primary amines and does not provide sequence-specific targeting.
  • The thiol groups react with soft electrophiles (e.g., maleimides) and other thiols; specificity is chemical rather than biological.

Dürfen wir Sie über Rabattaktionen informieren?

Später erinnern

Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.

Hoppla! Benachrichtigungen sind deaktiviert.