Determine the necessary mass, volume, or concentration for preparing a solution.
Methylene blue, also known as methylthioninium chloride, basic blue 9, etc., has the molecular formula C₁₆H₂₄ClN₃O₃S (hydrated form), a molecular weight of 373.9, and a CAS number of 7220-79-3.
Methylene blue staining solution is commonly used for staining silk, paper, bacteria, cells, etc. Because it is easily oxidized, staining results are not suitable for long-term storage.
Procedure (for reference only):
1. Sample Processing
① Paraffin sections
Deparaffinize in xylene for 5–10 min.
Replace with fresh xylene and deparaffinize again for 5–10 min.
Immerse in anhydrous ethanol for 5 min.
Rinse in distilled water for 2 min.
② Frozen sections
Rinse in distilled water for 2 min.
③ Cultured cells
Fix with 4% paraformaldehyde for at least 10 min.
Wash with distilled water for 2 min.
Replace with fresh distilled water and wash again for 2 min.
2. Methylene Blue Staining
Stain with Methylene Blue Staining Solution (2%) for 3–10 min (the time can be adjusted according to the staining results and requirements).
Wash thoroughly with distilled water or tap water, then observe and photograph.
Staining Results:
Tissues or cells: blue
Precautions:
1.When using this reagent for the first time, it is recommended to perform a preliminary experiment with 1–2 samples.
2.For your safety and health, please wear a lab coat and disposable gloves during operation.
3.This product is for research use only and must not be used for any other purposes.
| Empfindlichkeit | Light-sensitive |
|---|---|
| Schmelzpunkt (°C) | 235°C |
H315:Causes skin irritation
H319:Causes serious eye irritation
H335:May cause respiratory irritation
H373:May causes damage to organs through prolonged or repeated exposure
H302:Harmful if swallowed
P261:Avoid breathing dust/fume/gas/mist/vapors/spray.
P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
P280:Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352:IF ON SKIN: wash with plenty of water.
P321:Specific treatment (see ... on this label).
P405:Store locked up.
P501:Dispose of contents/container to an approved waste disposal plant.
P264:Wash hands [and …] thoroughly after handling.
P260:Do not breathe dust/fume/gas/mist/vapors/spray.
P271:Use only outdoors or in a well-ventilated area.
P270:Do not eat, drink or smoke when using this product.
P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233:Store in a well-ventilated place. Keep container tightly closed.
P362+P364:Take off contaminated clothing and wash it before reuse.
P330:Rinse mouth.
P264+P265:Wash hands [and …] thoroughly after handling. Do not touch eyes.
P301+P317:IF SWALLOWED: Get medical help.
P337+P317:If eye irritation persists: Get medical help.
P332+P317:If skin irritation occurs: Get medical help.
P319:Get medical help if you feel unwell.
Formal, item-validated protocols are not provided in the product data. The following are general literature/good-practice outlines for a 2% stock used as a stain. Adjust to your samples and safety rules.
Simple cell/bacteria stain (brightfield):
Agarose gel DNA stain:
Redox indicator demo:
Tissue sections (general):
Notes:
These are general guidelines, not item-specific validated protocols.
This section summarizes literature context for the active dye methylene blue; it does not describe medical/clinical use.
Charge-driven interactions: As a cationic phenothiazinium dye, methylene blue associates with negatively charged biomolecules (nucleic acids, acidic polysaccharides) and cell surfaces, enabling contrast in light microscopy.
Nucleic acid affinity (literature): Intercalative and electrostatic interactions with DNA/RNA yield visible staining under white light. Binding strength and spectral properties depend on ionic strength, pH, and crowding agents.
Protein/tissue interactions: Prefers acidic tissue components; often accentuates nuclei and certain granules. Limited penetration into highly hydrophobic domains without surfactants or permeabilization.
Redox activity: Engages in reversible redox cycling (MB ↔ leucomethylene blue), which can report on cellular reducing environments. This underlies its use as a redox indicator in microbiology and biochemical assays.
Photochemical behavior: Upon illumination in the presence of oxygen, acts as a photosensitizer capable of generating reactive oxygen species (e.g., singlet oxygen). In biological contexts, this can lead to photobleaching of the dye and photo-oxidation of nearby biomolecules (hence light protection is recommended during storage).
Aggregation: Exhibits concentration-dependent dimerization/aggregation in aqueous media, altering absorption maxima and apparent staining intensity (literature). Dilution and ionic composition can tune monomer–dimer equilibria for consistent staining outcomes.
Note: The above are general literature characteristics of methylene blue and may vary with formulation; consult your own controls for your specific matrix and protocol.
This product is a staining solution, not a buffering reagent.
Practical guidance:
Consider environmental, safety, and waste aspects when choosing stains and nucleic acid visualization methods.
Comparison (literature/general; suitability depends on assay):
Aqueous basic stains
Nucleic acid gel stains
Redox indicators
Waste minimization tips:
No pharmaceutical or clinical applications are claimed for this product. It is supplied strictly for research and laboratory use.
Contextual/literature notes (non-claims):
This product is a BioReagent-grade 2% solution and should not be used for any human or veterinary applications. For any regulated diagnostic or GMP manufacturing, obtain grade-appropriate materials and documentation (e.g., USP/EP grade, DMF, or CQ documentation) and validate suitability.
Item-specific physical specifications for this 2% solution are not provided in the product data.
Literature/general properties of the active dye (methylene blue) — for context only:
Note: Use the specific batch CoA/Spec Sheet for any quantitative property needed for regulated/validated methods.
Supplied grade: BioReagent — intended for laboratory research and life-science workflows. This designation generally indicates control of common biological contaminants and consistency suitable for staining/imaging and routine biochemical procedures. It is not a clinical/diagnostic grade and is not intended for therapeutic use.
What BioReagent typically implies (general):
This item (2% solution) — specification notes:
Verification & documentation:
Related grades (context, not supplied here): Analytical Reagent (AR), HPLC, ACS, or USP/NF grades have different intents and control criteria; choose based on assay requirements and regulatory context.
Focused on laboratory staining and analytical uses rather than synthetic reactions.
Microscopy/simple staining (general):
Microbiology (general):
Nucleic acid/gel staining (literature practice):
Photochemical/analytical roles (literature):
Practical tips:
General literature guidance for uses of methylene blue (active dye); adjust to your system and consult primary references.
Photochemical oxidations (literature):
Redox indicator assays (literature):
MBAS assay for anionic surfactants (literature):
Gel staining (laboratory practice):
Note: The above are general guidance ranges from literature/typical practice and are not item-specific specifications. Optimize empirically for your substrate, path length, and instrumentation.
Authoritative hazard classification for this specific 2% solution is not provided in the product data.
Always consult the product’s SDS for official hazard, exposure limits, and emergency procedures.
This product is a ready-to-use aqueous 2% staining solution. Solvent selection is typically not required unless you plan to dilute or rinse.
Polarity/miscibility (general):
When to dilute in buffer vs. water:
Rinsing/destaining:
Comparison (general context):
Handling and longevity (general best practices):
Compatibility and dilution:
Item-specific parameters not provided:
Always consult the product label and SDS for any additional storage cautions or incompatibilities.
A ready-to-use 2% aqueous staining solution formulated with the cationic phenothiazinium dye commonly known as methylene blue (MB), supplied for life-science staining workflows.
Structural features of the active dye (methylene blue) — literature description:
Identifiers for methylene blue (active dye) — literature values (for reference only; not item-specific):
Note: Because this listing is for a prepared 2% solution, batch-specific identifiers (exact salt form, pH, excipients) should be taken from the item’s CoA/Spec Sheet.
While primarily a biological stain, the active dye methylene blue has recognized roles in chemical methodology (literature context).
Photoredox catalysis: Serves as an organic photosensitizer for visible-light-driven oxidations (e.g., aerobic oxidative coupling, sulfide to sulfoxide conversions) via generation of singlet oxygen or electron-transfer pathways. The cationic nature can influence substrate association in polar media.
Redox mediator: Useful as an electron shuttle in electrochemical setups and biochemical model systems; reversible MB/leucomethylene blue couple provides a convenient spectroscopic handle around 660–668 nm.
Analytical chemistry: Acts as a reporter dye in methylene blue active substances (MBAS) assays for anionic surfactants; ion-pair formation and extraction underpin the method.
Practical note for this 2% solution: For synthetic/analytical uses requiring defined molarity, determine concentration by UV–Vis using an appropriate extinction coefficient (literature) because mass% of the solution may not directly translate to molarity without density and exact salt/hydration details. Alternatively, prepare standard curves versus known MB standards.
Compatibility: Best in aqueous or mixed polar solvents; strong reducing agents will bleach the dye, terminating photoredox cycles unless reoxidized by air or an oxidant.
Not applicable. This product is a general staining solution and is not an antibody, probe, or affinity reagent with defined target specificity.
Unser Leitfaden zur Qualitätsauswahl behandelt Reinheit, Stabilisatorstatus und Anwendungseignung für alle Varianten in unserem Katalog.
BioReagent Qualitätsleitfaden ansehen → Biological Stain Qualitätsleitfaden ansehen →