β molecular sieve - Pore ​​diameter: 0.55-0.7nm

Cat. No.: M196617
Zu bestellen verfügbar
QUALITÄT & REINHEIT Pore ​​diameter: 0.55-0.7nm
Synonyms
β molecular sieve
Storage
Room temperature,Desiccated
Shipped In
Normal
★
Größe
Deutschland (EU)
USA*
Preis
Menge
2g
M196617-2g
—
2 Auf Lager
43,30€
10g
M196617-10g
—
5 Auf Lager
120,53€
Enter a quantity for the sizes you want to add.

Spezifikationen

Synonyme
β molecular sieve
Spezifikationen & Reinheit
Pore ​​diameter: 0.55-0.7nm
Storage
Room temperature,Desiccated
Verschickt in
Normal

Erweiterte Daten

Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

10 results found

Lot NumberCertificate TypeDatumArtikel
B2625691B2625691Certificate of AnalysisJan 29, 2026 M196617
B2625692B2625692Certificate of AnalysisJan 29, 2026 M196617
G2222706G2222706Certificate of AnalysisMay 13, 2025 M196617
E2514429E2514429Certificate of AnalysisApr 28, 2025 M196617
E2514430E2514430Certificate of AnalysisApr 28, 2025 M196617
I2505105I2505105Certificate of AnalysisApr 28, 2025 M196617
E2231159E2231159Certificate of AnalysisMar 04, 2025 M196617
A2206615A2206615Certificate of AnalysisOct 09, 2024 M196617
E2410201E2410201Certificate of AnalysisMar 09, 2024 M196617
K2404471K2404471Certificate of AnalysisMar 19, 2022 M196617
FAQs und Artikel
Lösungsrechner
Bewertungen

Kundenbewertungen

Application Protocols

No biology assay protocols apply. For chemical catalysis/adsorption, general workflows include:

  • Catalyst activation (general): Heat in air at 450–550 °C (H‑form generation) or dry under inert/vacuum at 200–350 °C to remove physisorbed water. Cool under inert and transfer quickly to avoid moisture uptake.
  • Batch reaction setup (general): Charge dried substrate/solvent and catalyst (1–10 wt% relative to substrate) under dry conditions. Stir/hear to target temperature. Monitor by GC/LC. Filter to remove catalyst; wash and regenerate catalyst as needed.
  • Fixed-bed operation (general): Load shaped bodies; activate in situ; feed dry reactants at defined WHSV and temperature; monitor pressure drop and conversion; periodically regenerate in air. These are generic literature practices and not validated protocols for SKU M196617.
Biological Roles

β molecular sieve (zeolite Beta) is an inorganic aluminosilicate framework without intrinsic biological function. It is not a metabolite, enzyme, or ligand in cellular pathways.

  • In vitro/bioprocess context (general): Occasionally used as an adsorbent to remove water or organic impurities from process streams, or as a heterogeneous acid catalyst for chemical steps in the synthesis of bioactive molecules. Any interactions are physico-chemical (adsorption/acid catalysis), not biological signaling.
  • Biocompatibility/biodegradability: Zeolites are insoluble and not biodegradable; they may be suspended as particulates. No claims are made regarding biocompatibility; for laboratory research use only, as stated by the product.
  • Enzyme or receptor specificity: Not applicable. For biological applications requiring buffers or cell systems, see Buffer Applications (not typically applicable) and adhere to SDS and institutional safety guidelines.
Buffer Applications

Not typically applicable. β molecular sieve is a solid aluminosilicate catalyst/adsorbent and is not used to prepare or maintain aqueous buffer systems.

Practical note: If used to dry organic solvents prior to biochemical work, ensure complete removal of fines by filtration and confirm water content analytically (e.g., Karl Fischer) to avoid unintended effects on sensitive assays.

Green Alternatives

Role of β molecular sieve in greener chemistry (literature perspective)

  • As a solid acid catalyst, H‑Beta replaces corrosive mineral acids (HF, H2SO4) and Lewis acids (AlCl3), reducing acidic effluent, corrosion, and waste neutralization. It enables catalyst recovery/reuse and facilitates product separation.

Comparison (general, not item-specific)

| Option | Waste/Workup | Corrosivity | Reusability | Selectivity | |---|---|---|---|---| | H2SO4/HF/AlCl3 (homogeneous) | High salt waste, aqueous quench | High | Single-use | Low–moderate | | Zeolite Beta (heterogeneous) | Minimal neutralization, filtration-only | Low | Reusable after calcination | Often higher via shape selectivity | | Other solid acids (e.g., Amberlyst, Nb2O5, ZSM-5) | Low–moderate | Low | Reusable | Substrate- and pore-dependent |

Trade-offs and considerations

  • Water sensitivity: Acid sites are poisoned by water; processes may require dry feeds and solvent recovery.
  • Coke formation: Solid acids can foul; periodic regeneration (oxidative calcination) consumes energy.
  • Metal content: If metal-modified, consider end-of-life metal recovery.
  • Alternative frameworks: 2-Methylfuran/CPME as greener solvents or alternative catalysts (e.g., sulfated zirconia) may be preferred for specific transformations; however, zeolite Beta often offers superior shape-selectivity for C6–C12 aromatics/olefins.
Pharmaceutical Uses

Formulation/excipient role: Zeolite Beta is generally not used as a pharmaceutical excipient. It is primarily a process aid in synthetic chemistry.

Process chemistry context (general)

  • Heterogeneous catalysis: Employed as a solid acid catalyst for steps in API/intermediate synthesis to reduce acidic aqueous waste relative to mineral acids. Choice of SAR and form (H‑Beta vs. metal-modified) depends on substrate and desired selectivity.
  • Drying/adsorption: Can remove water or certain organics from non-aqueous streams. Verify leachables/extractables and metal content according to GMP expectations if used in regulated manufacturing.
  • Regulatory status: No pharmacopeial monograph for zeolite Beta is typical. For GMP processes, qualify supplier, assess residuals (e.g., Na, template), and ensure effective removal from product by filtration/washing. This information is provided for manufacturing/formulation context only; no therapeutic or clinical claims are made.
Physical Properties

Item-specific values (specs)

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Density (true/bulk), surface area, pore volume, particle size: Not specified for this item; refer to CoA/Spec Sheet.

General/literature characteristics for zeolite Beta (non-spec)

  • Physical state: Free-flowing solid powder or shaped bodies (pellets/extrudates) depending on form.
  • Framework density: ~1.5–1.6 g·cm−3; crystallographic density ~2.1–2.2 g·cm−3 (literature).
  • Surface area (BET): typically 450–750 m2·g−1 for well-crystallized H-Beta (literature).
  • Micropore volume: ~0.18–0.30 cm3·g−1 (literature).
  • Pore opening: 12-MR, ~0.66–0.76 nm, with intersecting channels (literature).
  • Thermal stability: generally stable to >700 °C in dry air; hydrothermal stability depends on Si/Al ratio (higher Si/Al → better stability) (literature).
  • Solubility: Insoluble in water and common organic solvents; dispersible as a solid in many liquids.
  • Acidity: Bronsted acid site density correlates with Al content; typical total acidity 0.1–1.0 mmol H+·g−1 depending on Si/Al and treatment (literature).
  • Volatile content: As-supplied materials may contain physisorbed water; loss on drying often several wt% before activation (literature). Notes: Values above are provided as general guidance and are not specifications for SKU M196617.
Quality and Grades

Item-specific quality information

  • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
  • Stabilizers/Binders: Not specified for this item; refer to CoA/Spec Sheet.

How to interpret quality for β molecular sieve (general guidance)

  • Si/Al ratio (SAR): Governs acidity and hydrothermal stability. Low SAR (6–15) → higher Bronsted acid density but lower steam tolerance; high SAR (25–150) → lower acidity, better stability and hydrophobicity.
  • Cation form: NH4-Beta (convertible to H-Beta by calcination), H-Beta (acid form, catalytic), Na/K-Beta (as-synthesized; less acidic), metal-exchanged Beta (e.g., La-, Fe-, or Cu-Beta for tailored functions). Verify form on CoA.
  • Physical form: Powder vs. shaped bodies (extrudates/pellets) and binder content (e.g., alumina/silica binder 10–30 wt%) affect pressure drop and diffusion; check CoA if your process is flow-based.
  • Textural properties: BET surface area, micropore volume, external surface (t-plot), particle size distribution, and crush strength for shaped bodies are typical QC metrics.
  • Contaminants: Residual template (if inadequately calcined), extraneous metals, or amorphous silica/alumina phases. CoA typically includes ignition loss (LOI), Na2O content, and ash composition.
  • UV cutoff, water/peroxide ppm, and metal limits: Not specified for this item; refer to CoA/Spec Sheet. Selection advice
  • For strong Brønsted-acid catalysis (e.g., alkylation, isomerization), choose H-Beta with moderate SAR (12–30). For shape-selective adsorption or reactions with sensitive substrates, higher SAR (≥50) reduces nonselective adsorption of polar impurities.
Reaction and Applications

Zeolite Beta (β molecular sieve) is widely used as a shape-selective, solid Brønsted/Lewis acid catalyst and as a microporous adsorbent.

Catalytic applications (literature examples)

  • Hydrocarbon transformations: Alkylation of aromatics (e.g., benzene/alkylbenzenes), isomerization of alkanes/olefins, cracking and hydrocracking support (with metal function), and transalkylation.
  • Oxygenate chemistry: Etherification (MTBE/TAME analogs), acetalization/ketalization, dehydration of alcohols to olefins/ethers, and esterification under heterogeneous acid conditions.
  • Rearrangements: Beckmann rearrangement of cyclohexanone oxime to caprolactam intermediates; skeletal isomerization of bicyclics/terpenes.
  • Fine chemicals: Friedel–Crafts-type alkylation/acylation (solid-acid alternative to mineral acids/AlCl3), protection/deprotection equilibria.
  • Selective oxidations: When modified (e.g., Ti-Beta), epoxidation of alkenes with H2O2 (note: Ti-Beta is a distinct material prepared by isomorphous substitution; not implied for this item).

Adsorptive/separation uses (literature)

  • Drying of moderately bulky organics and aromatics; separation based on size/shape within 12-MR channels; VOC capture.

Practical tips

  • Activation: Convert NH4-form to H-form by calcination (e.g., 450–550 °C in air; literature). Dry before use to remove physisorbed water.
  • Diffusion: Match substrate size to pore architecture to exploit shape selectivity and minimize coke formation.
  • Regeneration: Remove coke by oxidative calcination in air at 450–550 °C (literature). Control ramp rates to preserve crystallinity. All examples are general literature guidance and not specifications for SKU M196617.
Reaction Conditions

The following are general literature conditions for using zeolite Beta as a heterogeneous catalyst; optimize for your substrate and reactor.

Activation and pretreatment (literature)

  • NH4→H conversion: Calcine at 450–550 °C in flowing air (1–5 h; ramp 1–2 °C·min−1). Cool under dry inert gas to prevent readsorption of water.
  • Simple drying: For adsorptive drying or mild catalysis, 200–350 °C under vacuum or dry N2 for 2–8 h often suffices.

Typical catalytic conditions (literature ranges)

  • Alkylation/isomerization of aromatics/olefins: 60–250 °C, liquid or vapor phase; solvents such as toluene, heptane, or neat feeds. Atmospheric to several bar. WHSV 0.1–5 h−1 (flow) or 1–10 wt% catalyst (batch).
  • Alcohol dehydration/etherification: 80–200 °C; solvent-free or in hydrocarbons; remove water continuously to drive equilibrium.
  • Beckmann rearrangement: 120–250 °C (vapor phase) or 80–150 °C (liquid phase with appropriate solvent), often using H‑Beta of moderate SAR.
  • Regeneration: Air or O2/N2 at 450–550 °C to remove coke; repeat until activity restored.

Solvent and feed considerations

  • Keep feeds dry; water inhibits Bronsted acidity. Match molecular size to 12‑MR pores to exploit selectivity and minimize diffusion limitations.

Yields/selectivities: Highly substrate- and setup-dependent; consult primary literature for your transformation. Values here are general guidance and not specifications.

Safety and Handling

GHS/SDS

  • Signal Word, Hazard Statements, Pictograms, Classification: Not specified for this item; refer to the SDS for authoritative safety information.

General laboratory safety for zeolitic molecular sieves (literature/good practice)

  • Hazards: Nuisance dust; mechanical/ocular irritation. Bronchial irritation possible if inhaled. Not known to be flammable or combustible. Adsorption of water/solvents is exothermic; heat generation may occur during drying or contact with reactive vapors.
  • PPE: Use safety glasses with side shields, lab coat, and appropriate gloves. Employ a dust mask/respirator (e.g., N95 or P2) if dust may become airborne. Handle powders in a fume hood or ventilated enclosure.
  • Incompatibilities: Avoid strong acids/bases at elevated temperature (framework degradation, dealumination). Avoid exposure to hydrofluoric acid (dissolves aluminosilicates). Do not confine freshly activated material with high partial pressure of water/organics due to rapid exothermic adsorption.
  • First aid (overview): If inhaled, move to fresh air; seek medical attention if symptoms persist. If in eyes, rinse cautiously with water for several minutes; remove contact lenses if present and easy to do. If on skin, wash with soap and water. If ingested, rinse mouth; seek medical advice.
  • Fire-fighting: Material is inorganic and noncombustible; use extinguishing media suitable for surrounding fire. Thermal shock/hot adsorption may fracture particles but does not release flammable gases. Always consult the product SDS before use.
Solvent Selection

This product is a solid heterogeneous catalyst/adsorbent and is not used as a solvent. Solvent selection is therefore application-dependent and should be guided by the chemistry being performed on or within the zeolite pores.

Practical pointers (general)

  • Polarity tolerance: Zeolite Beta can be contacted with a wide range of hydrocarbons (C6–C12 alkanes/arenes/olefins) and selected polar organics (alcohols, ketones). Strong bases or highly acidic mineral media at elevated temperature can damage the framework.
  • Diffusion considerations: Choose solvents and reactant sizes compatible with 12-MR pores (~0.66–0.76 nm openings, literature). Bulky solvents can hinder intracrystalline diffusion and suppress activity/selectivity.
  • Moisture: For adsorption or acid-catalyzed reactions, employ dry solvents to avoid site poisoning by water. Activate the sieve prior to use as needed (see Storage & Reconstitution). For solvent-specific advice, see Reaction & Applications and Reaction Conditions.
Storage and Reconstitution

Storage (from Product Data)

  • Store at room temperature, desiccated, and cool. Shipments are under normal conditions.

General handling/activation (literature guidance)

  • Keep container tightly closed to prevent moisture uptake; zeolites adsorb water readily, which can alter mass and catalytic performance.
  • If material has been exposed to ambient humidity, reactivate prior to critical use:
    • Drying: 200–350 °C under vacuum or dry N2 for 2–8 h to remove physisorbed water.
    • H‑form generation (if starting from NH4‑form): Calcine 450–550 °C in air for 1–5 h (ramp 1–2 °C·min−1). Allow to cool under inert gas.
  • Post-activation handling: Transfer hot or warm under inert atmosphere when feasible; store in a desiccator or sealed moisture-barrier packaging with desiccant.
  • Avoid repeated exposure to steam or liquid water at elevated temperature to preserve framework integrity (especially at low Si/Al ratios).

Reconstitution

  • Not applicable (solid, ready to use after activation/drying). If supplied as pellets/extrudates, do not grind unless particle-size control is intended; fines can increase pressure drop in flow systems. Always refer to the CoA/SDS for item-specific guidance.
Structure and Identity

Brief overview: β molecular sieve refers to zeolite Beta (framework code BEA), a crystalline microporous aluminosilicate with 12-membered-ring channels and high Bronsted/Lewis acidity when in the H-form.

  • Item-specific identifiers
    • CAS: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet. (Zeolite Beta is a framework solid with variable Si/Al and extraframework cations.)
    • Molecular Weight: Not applicable (extended solid; framework composition varies with Si/Al ratio).
    • SMILES: Not applicable for an extended inorganic framework.
    • InChIKey: Not applicable for an extended inorganic framework.
  • Structural features (general/literature)
    • Framework type: BEA (zeolite Beta), an intergrowth of polymorphs A and B.
    • Pore system: 3D channel network of 12-membered rings; intersecting channels with pore openings about 0.66–0.76 nm (literature).
    • Composition: (M)x/n[AlxSi(192−x)O384], where M is a charge-balancing cation (H+, NH4+, Na+, etc.); Si/Al ratio tunable (literature typical range ~6 to >100 depending on synthesis and dealumination).
    • Acidity: Bronsted acid sites from framework Al (H-form); Lewis acidity from extra-framework Al (if present) (literature).
  • 2D/3D structural description (general)
    • Three-dimensional, intersecting channels running along crystallographic directions; 12-T rings confer medium–large pore shape selectivity enabling conversion/adsorption of C6–C12 organics.
    • Crystallites often submicron to micron-sized agglomerates; binder may be present in shaped bodies (pellets/extrudates) in some grades (not specified for this item).
Synthetic Utility

Functional characteristics (general literature)

  • Solid Brønsted acid sites enable carbocation-mediated transformations (alkylation, isomerization, cracking). Lewis acidity may arise from extra-framework Al or exchanged metals.
  • 12-MR, 3D pore network affords shape-selectivity for C6–C12 substrates, controlling regioselectivity and suppressing over-alkylation by diffusion constraints.

Representative transformations

  • Friedel–Crafts alkylation/acylation of arenes using olefins/alcohols/anhydrides under heterogeneous conditions.
  • Etherification and acetalization of alcohols/carbonyls; dehydration of alcohols to olefins/ethers.
  • Beckmann rearrangement of oximes (e.g., cyclohexanone oxime) to lactam intermediates.
  • Skeletal isomerization of alkylaromatics (e.g., m-xylene → p-xylene enrichment with appropriate conditions/modifications).
  • Hydrotreating/hydroisomerization when combined with metal function (e.g., Pt/H‑Beta) for bifunctional catalysis.

Practical guidance

  • Choose Si/Al ratio to balance acidity and stability; higher SAR mitigates coke but reduces site density.
  • Pre-treatment: Calcine NH4‑form to H‑form (450–550 °C, air; literature). Dry thoroughly.
  • Particle morphology matters: Nano‑Beta or mesoporous–Beta composites can reduce diffusion limits; shaped bodies benefit flow reactors.
  • Regeneration: Oxidative burn-off of coke, controlled ramp to preserve crystallinity. These are general literature insights and not specifications for SKU M196617.
Target Specificity

Not applicable. This product is an inorganic zeolitic material, not a biological targeting reagent (e.g., antibody, enzyme inhibitor, or ligand). No antigen/epitope specificity applies.

Dürfen wir Sie über Rabattaktionen informieren?

Später erinnern

Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.

Hoppla! Benachrichtigungen sind deaktiviert.