QUALITÄT & REINHEITRecombinant?Recombinant — produced via recombinant expression for defined sequence and consistency. Use for reproducible, animal-free proteins of known origin.ExactAb™?ExactAb™ — Aladdin's antibody line emphasizing precision and validated quality. Use for reliable, specificity-validated antibody applications.Validated?Validated grade — performance confirmed in defined applications before release. Use when you want documented assurance the reagent works as stated.See COA
Rabbit anti Human TRAP1 Antibody, Recombinant, could be used for WB and so on. Application: WB: 1/500-1/2000 Protein Function Chaperone that expresses an ATPase activity.
Spezifikationen
Product Name
Recombinant TRAP1 Antibody - Primärer Antikörper, specific to TRAP1, Rabbit IgG
Synonyme
Heat shock protein 75 kDa antibody|Heat shock protein 75 kDa, mitochondrial antibody|HSP 75 antibody|HSP75 antibody|HSP90L antibody|mitochondrial antibody|TNF receptor associated protein 1 antibody|TNFR-associated protein 1 antibody|TRAP-1 antibody|Trap1 antibody|Tumor necrosis factor type 1 receptor-associated protein antibody|HSP75|HSP 75|HSP90L|TRAP-1
Spezifikationen & Reinheit
Recombinant, ExactAb™, Validated, See COA
Wirtsspezies
Kaninchen
Spezifität
TRAP1
Immunogen
A synthetic peptide derived from human TRAP1 (AA 50-100).
Positive Kontrolle
WB: K562, HeLa, HEK293 and Hep G2 cell lysates.
Konjugation
Unconjugated
Note
ExactAb™, Recombinant, Validated
Isotyp
Rabbit IgG
Lichterketten-Typ
kappa
SDS-PAGE
150 kDa
Verfahren zur Reinigung
Protein A purified
Konzentration
See COA
Product Line
Biologische Produkte
Lagerung und Versand
Form
Liquid
Storage
Store at -20°C,Avoid repeated freezing and thawing
Verschickt in
Ice chest + Ice pads
Stabilität und Lagerung
Store at 4°C short term (1-2 weeks). Store at -20°C long term (24 months). Upon receipt, it is recommended to aliquot. Avoid freeze/thaw cycle.
Bilder
Recombinant TRAP1 Antibody (Ab132334) - Western Blot All lanes: Recombinant TRAP1 Antibody (Ab132334) at 1/1000 dilution Samples: Lysates at 20 µg per lane Secondary: Goat Anti-Rabbit IgG H&L (HRP) (Ab170144) at 1/20000 dilution
Predicted band size: 75 kDa Observed band size: 73 kDa Exposure time: 100.0 s
Anwendung
Anwendung
Dilution info
WB
1/500-1/2000
Erweiterte Daten
Zugehörige Ziele (menschlich)
TRAP1TchemHeat shock protein 75 kDa, mitochondrial (0 Activities)
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Bewertungen
Kundenbewertungen
Application Protocols
Protocols and validated applications must come from product-specific data.
Manufacturer applications (verbatim): Not provided in Product Data.
Tested applications (e.g., WB, IHC, IF, ELISA, IP) and recommended dilutions: Not specified for this item; refer to CoA/Spec Sheet.
Positive/negative control suggestions, antigen retrieval, and blocking conditions: Not specified for this item; refer to CoA/Spec Sheet.
General note: Establish assay conditions empirically starting with typical ranges from the literature, then refine based on signal-to-noise and sample context.
Biological Roles
TRAP1 (TNF receptor-associated protein 1) is a mitochondrial molecular chaperone in the HSP90 family that supports protein homeostasis. The following describes the biology of the target protein (literature; general knowledge, not item-specific performance claims):
Localization and structure:
Predominantly mitochondrial, with an N‑terminal targeting sequence; forms homodimers typical of HSP90 paralogs.
Molecular function:
ATP-dependent chaperone that assists folding, stabilization, and quality control of mitochondrial client proteins.
Modulates mitochondrial proteostasis, influences oxidative phosphorylation components, and can interface with the mitochondrial unfolded protein response.
Cellular roles:
Coordinates responses to metabolic and oxidative stress by regulating client turnover and activity.
Impacts mitochondrial dynamics, bioenergetics, and reactive oxygen species handling through chaperoning of key enzymes.
Interactions and regulation:
Shares mechanistic features with cytosolic HSP90, including nucleotide-dependent conformational cycling and co-chaperone interactions (mitochondria-adapted).
Research relevance:
Widely studied in contexts of cellular stress adaptation, proteostasis, and mitochondrial quality control.
This antibody is intended to recognize TRAP1 for research detection/quantitation. Specific epitope, isotype, and species reactivity are Not specified for this item; consult the CoA/Spec Sheet for experimental planning.
Buffer Applications
Buffering systems are not a primary feature of this antibody product.
Working buffers: Use gentle, isotonic buffers for dilutions (e.g., PBS, TBS) with optional carrier proteins (e.g., BSA) and surfactants (e.g., 0.05% Tween-20) as appropriate for the assay. Exact recommended formulations are Not specified for this item; refer to CoA/Spec Sheet.
pH considerations: Most antibody–antigen interactions are performed near neutral pH (literature); adjust only if validated for a given assay.
Antigen retrieval buffers (IHC) and blocking buffers: Selection depends on tissue and detection system; not specified for this item.
Green Alternatives
Green solvent substitution is not applicable to a recombinant antibody. Environmental considerations focus on buffer preparation and consumable use.
Practical tips (general):
Prepare only the buffer volumes needed; store concentrates to reduce waste.
Use phosphate or Tris buffers at neutral pH; avoid unnecessary preservatives if biosafety allows.
Minimize single-use plastics by consolidating aliquots and using reusable, appropriately decontaminated labware when possible.
Dispose of proteinaceous waste according to institutional biosafety and environmental policies.
Pharmaceutical Uses
This product is supplied for research use only and is not intended for human or veterinary use, diagnostics, or therapeutic applications.
Excipient/formulation roles: Not applicable; this is not an excipient-grade material.
Pharmacopeial status: Not specified for this item; refer to CoA/Spec Sheet.
Use is restricted to laboratory research applications such as immunoassays and target characterization.
Physical Properties
Key physical constants specific to this vial are not provided.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Concentration, buffer composition, and protein content: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight (antibody): Not specified for this item; refer to CoA/Spec Sheet.
General/literature context for recombinant antibodies (for planning only):
Typical IgG MW: ~150 kDa (literature).
Solubility: Antibodies are water-soluble in appropriate buffered saline (e.g., PBS) with stabilizers (literature); actual buffer for this item is not specified.
Isoelectric point (pI): commonly 6–9 depending on sequence/isotype (literature; not item-specific).
Stability: Enhanced by storage at ≤−20°C or 2–8°C (short term) and by avoiding freeze–thaw cycles (see product storage below).
Always consult the CoA/SDS for item-specific physical details when preparing assays or formulations.
Quality and Grades
This item is designated Recombinant, ExactAb™, Validated.
Recombinant (item-specific):
Produced from defined DNA sequence in a recombinant expression system for lot-to-lot consistency, supply continuity, and absence of hybridoma drift (general benefits of recombinant antibodies).
Eliminates animal-to-animal variability typical of polyclonal preparations.
ExactAb™ (item-specific branding):
Denotes Aladdin Scientific’s high-consistency recombinant antibody offering. Specific performance metrics, sequence, isotype, and host system are Not specified for this item; refer to CoA/Spec Sheet.
Validated (item-specific):
Indicates internal verification of target recognition and performance in one or more applications. Exact tested applications, species reactivity, and validation datasets are Not specified for this item; refer to CoA/Spec Sheet.
What this means for you:
Expect improved reproducibility across lots relative to conventional antibodies.
Traceability to sequence-defined reagents (recombinant) supports regulated and high-precision research workflows.
Note: Because stabilizers, concentration, and specific validation applications are not provided here, consult the CoA/Spec Sheet for assay-specific guidance (WB, IHC, IF, ELISA, etc.) and for any recommended dilutions.
Reaction and Applications
This section typically addresses small-molecule reaction chemistry and is not directly applicable to an antibody reagent.
For this product, relevant use-cases are immunoassay applications (e.g., WB, IHC, IF, ELISA, IP). Specific tested applications and conditions are Not specified for this item; refer to CoA/Spec Sheet.
If conjugation is desired (e.g., HRP, biotin, fluorophores), standard protein conjugation chemistries (literature) such as NHS-ester labeling of lysines or maleimide–thiol coupling may be used with appropriate controls; however, this product’s compatibility and recommended degree of labeling are Not specified for this item.
Reaction Conditions
Not applicable to small-molecule transformations. For immunoassay workflows, conditions are assay-specific.
General literature guidance (non-item-specific):
WB: Common primary antibody incubations range from 1–16 h at 4–25°C in TBST with protein block; dilutions are determined empirically.
IHC/IF: Incubations typically 1–16 h; antigen retrieval, blocking, and permeabilization conditions depend on tissue/cell type.
ELISA: Coating, blocking, and detection buffers optimized per platform.
For this item, tested applications, dilutions, and incubation parameters are Not specified; consult the CoA/Spec Sheet for validated conditions.
Safety and Handling
Follow standard laboratory practices for handling protein biologics.
GHS/SDS status: Signal word, hazard statements, classification, and pictograms: Not specified for this item; refer to SDS.
Potential hazards (general): Antibodies are typically low hazard but may cause irritation or allergic sensitization in susceptible individuals (literature/general guidance). Avoid aerosol generation and ingestion.
Personal protective equipment (PPE):
Lab coat, gloves (nitrile or latex), and safety glasses.
Use biological safety cabinet if handling large volumes, dried powders, or performing procedures that may aerosolize proteins.
Handling tips:
Keep on ice during use to preserve activity.
Avoid repeated freeze–thaw cycles; aliquot upon first thaw.
Incompatibilities (general): Avoid strong oxidizers or proteases; maintain recommended buffer pH and ionic strength.
First aid (general guidance; defer to SDS):
Skin/eye contact: Rinse with water for several minutes; remove contaminated clothing; seek medical advice if irritation persists.
Ingestion/inhalation: Move to fresh air; rinse mouth; seek medical advice.
Waste: Dispose according to institutional biosafety procedures for non-hazardous biological materials; decontaminate surfaces with appropriate detergents.
Authoritative safety information is provided by the product SDS; consult it prior to use.
Solvent Selection
This product is a protein antibody supplied in an aqueous formulation; organic solvent selection is generally not applicable.
Item-specific buffer composition and excipients: Not specified for this item; refer to CoA/Spec Sheet.
Practical guidance:
Use the supplied buffer or gentle, isotonic buffers (e.g., PBS) for dilutions.
Avoid organic solvents that denature proteins (e.g., acetone, acetonitrile, high % methanol) unless performing specialized procedures such as certain antigen retrieval steps outside of the antibody stock.
If adapting to assay buffers with detergents, use mild nonionic detergents at low percentages and verify compatibility empirically.
Storage and Reconstitution
Follow item-specific storage guidance to preserve antibody integrity.
Storage conditions (item-specific): Store at −20°C. Avoid repeated freezing and thawing (from Product Data). Aliquot upon first thaw.
Buffer composition, stabilizers, and preservative: Not specified for this item; refer to CoA/Spec Sheet.
Reconstitution: If supplied lyophilized, reconstitute with sterile buffer (e.g., PBS or manufacturer-recommended diluent) to the desired concentration; exact diluent and target concentration are Not specified for this item; refer to CoA/Spec Sheet. If supplied in liquid form, mix gently; do not vortex vigorously.
Working aliquots: Prepare single-use aliquots to prevent freeze–thaw cycles; keep on ice during use.
Short-term storage: For frequent use over a few days, 2–8°C is commonly used for many antibodies (literature), but adhere to the specified −20°C long-term condition for this item.
Stability/expiry: Not specified for this item; refer to CoA/Spec Sheet.
Always inspect for precipitates or loss of activity after storage; spin briefly to clarify if needed and test on known-positive controls.
Structure and Identity
This product is a recombinant research antibody raised against the TRAP1 target protein.
CAS, CID, InChIKey, SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula and exact molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
Structural features (general antibody architecture; literature):
Typical IgG antibodies are Y‑shaped glycoproteins (~150 kDa) composed of two heavy and two light chains linked by disulfides.
Domains: variable regions (antigen binding, CDRs) and constant regions (Fc).
Post-translational features may include N‑glycosylation in the Fc domain (isotype dependent; not specified for this item).
Antigen: TRAP1 (TNF receptor-associated protein 1), a mitochondrial HSP90-family chaperone (target stated in product name; further epitope/isotype/clonality not specified for this item).
Synthetic Utility
Not applicable. This is a biological reagent (recombinant antibody) rather than a synthetic building block or catalyst.
If chemical modification is planned (e.g., fluorophore, enzyme, or biotin conjugation), employ standard bioconjugation chemistries with careful control of protein integrity and antigen-binding activity. Specific compatibility and recommended protocols are Not specified for this item; refer to CoA/Spec Sheet.
Target Specificity
Only information from the Product Data may be listed here.
Target name: TRAP1 (from product name)
Epitope/region, clonality, isotype, host species, and species reactivity: Not specified for this item; refer to CoA/Spec Sheet.
Cross-reactivity and negative controls: Not specified for this item; refer to CoA/Spec Sheet.
Häufig gestellte Fragen
What does ExactAb? mean?
ExactAb? indicates the product has been validated for use in rigorous antibody validation workflows. Validation may include positive/negative control samples, signal-to-noise testing, and protocol-specific QC. Lot-specific test data is published on the Certificate of Analysis where available.
How should this product be stored?
Store at ?20 °C. Avoid repeated freeze–thaw cycles. Aliquot into single-use volumes before freezing.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What does Recombinant mean?
Recombinant is a defined analytical purity tier suitable for workflows requiring a specific validated property. It specifies a minimum assay percentage, controlled limits on common impurities (water, heavy metals, residue on ignition), and lot-to-lot consistency. Recombinant is one of several purity tiers — choose based on the sensitivity and regulatory requirements of your method.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Which species reactivity has this antibody been validated against?
Validated reactivity is listed on the PDP and on each lot's datasheet. We validate against the most commonly tested species for the target (Recombinant?TRAP1?Antibody); cross-reactivity in untested species may exist but is not guaranteed. Contact technical support for specific species inquiries.
Benötigen Sie Hilfe bei der Auswahl der Qualität?
Unser Leitfaden zur Qualitätsauswahl behandelt Reinheit, Stabilisatorstatus und Anwendungseignung für alle Varianten in unserem Katalog.
Wir verwenden Cookies, um die ordnungsgemäße Funktion der Website sicherzustellen und, soweit zulässig, Ihr Nutzererlebnis zu verbessern. Sie können Ihre Einstellungen jederzeit unter „Einstellungen“ verwalten. Weitere Informationen finden Sie in unserer Cookie-Richtlinie.
Dürfen wir Sie über Rabattaktionen informieren?
Später erinnern
Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.