QUALITÄT & REINHEITBioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Lösungsrechner
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Bewertungen
Kundenbewertungen
Application Protocols
General protocol for cultivating yeasts/molds in Sabouraud Liquid Medium (literature guidance; adapt as needed):
Preparation:
If supplied ready-to-use and sterile: Inspect for clarity and container integrity. Warm to room temperature before use.
If supplied as a concentrate or non-sterile: Dilute/sterilize per label. Item-specific details are Not specified for this item; refer to CoA/Spec Sheet.
Inoculation:
Aseptically transfer a defined inoculum (e.g., single colony resuspension or spore suspension) into the medium.
Recommended working volume in baffled flasks: ≤20–30% of flask volume to ensure aeration for yeasts.
Incubation:
25–30 °C for many yeasts and environmental molds; shaking at 150–250 rpm for yeasts; molds may require lower agitation to prevent shear damage.
Duration: 24–72 h for yeasts; up to several days for filamentous fungi; monitor turbidity or biomass.
Sampling and analysis:
Use sterile techniques; avoid repeatedly opening containers in non-sterile environments.
For enumeration, perform serial dilutions and plate on appropriate solid media.
Termination and disposal:
Decontaminate cultures by autoclaving or chemical disinfection prior to disposal, per institutional biosafety procedures.
Biological Roles
As a formulated medium, Sabouraud Liquid Medium provides nutrients and environmental conditions conducive to fungal growth; it does not itself possess a biological role in organisms.
General/literature context:
Nutritional profile: Complex nitrogen sources (e.g., peptones) supply amino acids and peptides; high carbohydrate (commonly dextrose) supplies carbon/energy for fermentative and oxidative metabolism in fungi and yeasts.
Selectivity via pH: An acidic pH (commonly around 5.6 in literature) reduces bacterial proliferation, enabling selective enrichment of fungi from mixed samples.
Metabolic pathways supported: Glycolysis and the TCA cycle are fueled by glucose; amino acid biosynthesis is supported by peptide uptake and transamination. Oxygen availability influences respiratory vs. fermentative metabolism in yeasts.
Phenotypic effects: Carbohydrate-rich media can promote robust biomass accumulation; sporulation or pigment production may require alternative media or specific environmental cues (light, pH shifts, micronutrients), organism-dependent.
Note: Exact composition and performance characteristics for this item are not specified; consult the CoA/Spec Sheet for any growth promotion or performance testing data.
Buffer Applications
Not typically used as a buffering agent or analytical buffer. Sabouraud Liquid Medium is a nutrient medium whose pH is set for selectivity rather than buffering capacity.
If a buffered environment is required (e.g., to stabilize pH during prolonged incubation), users sometimes supplement fungal media with appropriate buffer systems (literature examples include citrate–phosphate for acidic ranges). Compatibility and concentrations should be validated experimentally.
Item-specific buffer details: Not specified for this item; refer to CoA/Spec Sheet.
Green Alternatives
Green chemistry considerations are limited for a water-based culture medium; however, sustainable laboratory practices can reduce environmental impact.
Solvent and energy profile:
The medium is aqueous, avoiding organic solvents. If supplied ready-to-use, it may reduce in-lab energy use (no autoclaving/mixing), but shipping weight can be higher. Balance on-site preparation from powder vs. ready-to-use liquid based on local energy mix and logistics (literature best practice).
Waste minimization:
Prepare only the volume required for an experiment to limit disposal of biohazardous liquid waste.
Consolidate cultures for autoclave cycles to improve energy efficiency; avoid overfilling biohazard bags/containers to ensure effective sterilization.
Alternative media choices (literature comparison; suitability organism-dependent):
Potato Dextrose Broth (PDB): Similar fungal support; often prepared from plant-derived components; pH typically less acidic than Sabouraud.
Malt Extract Broth (MEB): Good for sporulation and certain molds; may provide better aroma/metabolite profiles for some studies.
Packaging considerations:
Choose container sizes that match usage to reduce plastic waste and expired material.
Recycle outer packaging where facilities exist; treat used medium as biohazard and not recyclable.
Pharmaceutical Uses
No clinical or therapeutic claims. For research and laboratory quality control contexts only.
General/literature laboratory roles in regulated environments (user validation required):
Environmental monitoring and bioburden studies focused on yeast and mold recovery in non-sterile product testing or cleanroom surveillance, where an acidic, carbohydrate-rich medium aids fungal detection while suppressing many bacteria.
Suitability for growth promotion testing must be verified per method (e.g., pharmacopoeial guidelines) and lot; this product’s specific compliance status and test results are Not specified for this item; refer to CoA/Spec Sheet.
Potential use as a base broth for selective media when supplemented with antibiotics or antifungals (user-prepared), subject to method validation.
Documentation and compliance:
Maintain lot traceability, storage records, and any in-house qualification results.
Confirm sterility status, pH, and performance criteria before use in QC workflows.
Physical Properties
Physical state/appearance: Aqueous liquid microbiological medium. Specific appearance details: Not specified for this item; refer to CoA/Spec Sheet.
Color/clarity: Not specified for this item; refer to CoA/Spec Sheet.
pH: Not specified for this item; refer to CoA/Spec Sheet. (Typical literature value for Sabouraud media: pH ~5.6 at 25 °C.)
Density, refractive index, osmolarity: Not specified for this item; refer to CoA/Spec Sheet.
Boiling point, melting point, vapor pressure: Not applicable/reported as an aqueous solution; properties approximate those of water (literature generalization).
Solubility: Fully aqueous; organic solvent solubility not applicable.
Conductivity/ionic strength: Not specified for this item; refer to CoA/Spec Sheet.
Practical notes (general/literature guidance):
The acidic pH commonly used for Sabouraud-type media suppresses many bacteria, enhancing selectivity for fungi.
Carbohydrate-rich media can undergo Maillard reactions or caramelization on excessive heat exposure; avoid unnecessary overheating during sterilization if applicable (literature caution).
Quality and Grades
Grade: BioReagent (item-specific). This designation indicates suitability for general biological and microbiological laboratory applications. It does not imply suitability for clinical use or manufacturing unless otherwise stated.
Purity/specifications: Not specified for this item; refer to CoA/Spec Sheet.
Sterility status: Not specified for this item; refer to CoA/Spec Sheet. Practically, ready-to-use liquid media may be supplied sterile and ready for inoculation, or as concentrates requiring sterile dilution—verify on the label/CoA.
Lot-to-lot consistency: For culture media, consistent nutrient profiles, pH, and clarity are critical; consult the CoA for acceptance criteria (e.g., growth promotion testing results, if provided).
Stabilizers/preservatives: Not specified for this item; refer to CoA/Spec Sheet. If present, preservatives can affect growth of sensitive organisms.
Documentation: For regulated workflows, retain CoA, SDS, and any growth promotion testing results with lot records.
Research Use Note: For research use only (item-specific). Not for diagnostic procedures or therapeutic applications.
Reaction and Applications
Chemical reaction use: Not applicable; this product is a biological culture medium rather than a chemical reagent.
Applications in microbiology/mycology (literature/general guidance):
Cultivation and maintenance of yeasts and molds from environmental, food, or research samples under acidic, carbohydrate-rich conditions.
Enumeration and enrichment of fungal contaminants in quality control settings (e.g., bioburden screening of non-sterile samples), where bacterial overgrowth is undesirable.
Recovery of dermatophytes and saprophytic fungi from mixed samples with optional antibiotics (when user-supplemented) to further suppress bacteria.
Yeast biomass production for downstream biochemical assays (e.g., enzyme extraction, metabolite profiling) where robust growth is preferred over defined media.
Practical tips (literature):
Typical incubation: 20–30 °C for environmental molds; 25–30 °C for many yeasts; adjust per organism requirements. Aeration/shaking promotes yeast growth in broth.
Aseptic technique is essential. If the product is not sterile, sterilize by validated methods (e.g., filtration) compatible with heat-sensitive components.
For selective cultivation, users may aseptically add antibiotics after sterilization/cooling; verify compatibility and final concentrations.
Reaction Conditions
Chemical reaction conditions are not applicable. This product serves as a biological culture medium, not as a reagent for chemical transformations.
For culture conditions instead (literature/general guidance; not item-specific):
Inoculation: Use aseptic technique; inoculate directly into the liquid medium with a defined inoculum.
Incubation: Many yeasts grow well at 25–30 °C with shaking (150–250 rpm) for aeration; molds may prefer static or gentle agitation depending on morphology and shear sensitivity.
Duration: 24–72 hours for fast-growing yeasts; several days for filamentous fungi, organism-dependent.
Monitoring: Measure OD600 for yeasts where applicable; for molds, assess dry weight or colony-forming units (via plating) due to filamentous growth.
Note: Exact incubation parameters depend on the organism and experimental goals and should be optimized by the user.
Safety and Handling
GHS classification, signal word, pictograms, H-statements: Not specified for this item; refer to the SDS.
General hazards: As a nutrient medium, the principal risk is biological—once inoculated, it will support growth of microorganisms. Treat all used medium as biohazardous waste.
PPE (good laboratory practice):
Wear lab coat, gloves, and eye protection when handling medium and cultures.
Work in a certified biological safety cabinet when handling pathogenic or unknown isolates, per your biosafety program.
Handling and hygiene:
Use aseptic technique to prevent contamination and unintended organism growth.
Decontaminate spills with appropriate disinfectant (e.g., freshly prepared 10% bleach, followed by water) and follow institutional biosafety procedures.
Incompatibilities: Avoid mixing with strong oxidizers or reactive chemicals. Do not autoclave in sealed containers. If supplements/antibiotics are added, follow their specific incompatibility guidance.
First aid (general): If splashed in eyes or on skin, rinse with water for at least 15 minutes. If ingested or inhaled as aerosolized droplets, seek medical attention and provide the SDS.
Waste disposal: Autoclave or chemically disinfect spent media and disposables before disposal in accordance with institutional and local regulations.
Storage: Room temperature (per Product Data). Protect from microbial contamination; keep container tightly closed.
Solvent Selection
Not a reagent for chemical synthesis; the product is an aqueous culture medium. Solvent selection in the chemical sense is not applicable.
General medium compatibility (literature guidance):
Matrix: Water-based; fully miscible with water. Addition of water-miscible supplements (e.g., sterile-filtered antibiotics) is routine when required for selective cultivation.
Organic solvents: Avoid adding organic cosolvents; even low levels of alcohols, DMSO, or other organics may inhibit fungal growth or alter selectivity.
Gas exchange: For aerobic fungi/yeasts, use baffled flasks or vented closures to facilitate oxygen transfer during liquid culture.
When to choose Sabouraud Liquid Medium vs. alternatives (general):
Choose Sabouraud for carbohydrate-rich, acidic conditions that favor yeasts and molds and suppress many bacteria.
Consider alternatives such as Malt Extract Broth (for sporulation and certain molds) or Potato Dextrose Broth (broad fungal utility) depending on the target organism’s nutritional profile.
Storage and Reconstitution
Storage conditions (item-specific): Room temperature (per Product Data). Protect from contamination; keep container tightly closed and stored in a clean area away from direct sunlight.
Shipping (item-specific): Shipped at ambient conditions (Normal).
Shelf life/expiry: Not specified for this item; refer to CoA/Spec Sheet.
Reconstitution/dilution:
If supplied as a ready-to-use liquid: No reconstitution required. Do not dilute unless specified by the label.
If supplied as a concentrate: Dilute with sterile water or appropriate diluent to the indicated final strength under aseptic conditions. Specific instructions Not specified for this item; refer to CoA/Spec Sheet.
Sterility:
Sterility status Not specified for this item; refer to CoA/Spec Sheet. If non-sterile, sterile-filter through 0.22 µm membrane into sterile containers where heat sterilization is unsuitable.
Freeze–thaw guidance: Avoid freezing unless the label indicates stability under freeze–thaw; repeated freeze–thaw can precipitate components or alter performance (general caution).
In-use storage: To minimize contamination, aliquot as needed into sterile vessels. Once opened, handle aseptically and use promptly; discard if turbidity or contamination is observed.
Structure and Identity
This product is a complex, aqueous microbiological growth medium formulated for cultivating yeasts and molds; it is not a single, defined chemical entity.
Item-specific identifiers:
CAS: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not applicable (complex mixture).
SMILES: Not applicable (complex mixture).
Molecular formula: Not applicable (mixture).
Molecular weight: Not applicable (mixture).
Trade/common name: Sabouraud Liquid Medium (also known in literature as Sabouraud Dextrose Broth).
Structural features (general/literature description, not item-specific):
Typically an aqueous solution containing complex nitrogen sources (e.g., peptones) and a high concentration of fermentable carbohydrate (often glucose/dextrose).
The medium is non-buffered or lightly buffered and adjusted to an acidic pH to suppress bacterial contaminants while favoring fungi.
2D “structure” description: As a mixture, the medium comprises soluble peptides/amino acids, salts, and sugars dissolved in water; there is no discrete molecular structure.
Notes: Because this is a formulated medium, exact composition, concentrations, and any supplements or antibiotics, if present, are formulation-dependent. Not specified for this item; refer to CoA/Spec Sheet.
Synthetic Utility
Not applicable to chemical synthesis. Sabouraud Liquid Medium is not used as a reagent, catalyst, or solvent in organic or inorganic reaction chemistry.
If components are repurposed (general note): individual constituents like glucose, amino acids/peptides, or salts can have chemical utility in separate contexts, but such use does not pertain to this formulated medium.
Target Specificity
Not an antibody, probe, or targeted biochemical reagent; no antigen/epitope specificity applies.
Functional selectivity (literature/general): The acidic, carbohydrate-rich formulation of Sabouraud-type media tends to favor growth of yeasts and molds while suppressing many bacteria. This is a physicochemical selectivity, not a molecular binding specificity.
Item-specific selectivity modifiers (e.g., antibiotics): Not specified for this item; refer to CoA/Spec Sheet.
Benötigen Sie Hilfe bei der Auswahl der Qualität?
Unser Leitfaden zur Qualitätsauswahl behandelt Reinheit, Stabilisatorstatus und Anwendungseignung für alle Varianten in unserem Katalog.
Wir verwenden Cookies, um die ordnungsgemäße Funktion der Website sicherzustellen und, soweit zulässig, Ihr Nutzererlebnis zu verbessern. Sie können Ihre Einstellungen jederzeit unter „Einstellungen“ verwalten. Weitere Informationen finden Sie in unserer Cookie-Richtlinie.
Dürfen wir Sie über Rabattaktionen informieren?
Später erinnern
Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.