spiro[2.3]hexan-4-one - ≥97%

Cat. No.: S175656
Zu bestellen verfügbar
QUALITÄT & REINHEIT ≥97%
Storage
Room temperature
Shipped In
Normal
★
Größe
Deutschland (EU)
USA*
Preis
Menge
1g
S175656-1g
Auf Bestellung · 8–12 Wochen

590,84€

886,74€
Speichern 295,90 € (33.37%)
Enter a quantity for the sizes you want to add.

Spezifikationen

Spezifikationen & Reinheit
≥97%
Storage
Room temperature
Verschickt in
Normal
Reinheit
≥97%
Namen und Kennungen
SMILES
C1CC2(C1=O)CC2
IUPAC Name
spiro[2.3]hexan-6-one
InChIKey
OIRNAOWGCPSZCJ-UHFFFAOYSA-N
InChI
1S/C6H8O/c7-5-1-2-6(5)3-4-6/h1-4H2

Erweiterte Daten

Taxonomic Classification

Taxonomy Tree

KingdomOrganic compounds
SuperclassOrganic oxygen compounds
KlasseOrganooxygen compounds
SubclassCarbonyl compounds
Intermediate Tree Nodes Not available
Direct ParentKetones
Alternative Parents Organic oxides  Hydrocarbon derivatives  
Molecular FrameworkAliphatic homopolycyclic compounds
Substituents Ketone - Organic oxide - Hydrocarbon derivative - Aliphatic homopolycyclic compound
BeschreibungThis compound belongs to the class of organic compounds known as ketones. These are organic compounds in which a carbonyl group is bonded to two carbon atoms R2C=O (neither R may be a hydrogen atom). Ketones that have one or more alpha-hydrogen atoms undergo keto-enol tautomerization, the tautomer being an enol.
External Descriptors Not available
3D-Struktur
Interaktives chemisches Strukturmodell





Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Chemische und physikalische Eigenschaften
Molekulargewicht96.13
XLogP30.400
Hydrogen Bond Donor Count0
Hydrogen Bond Acceptor Count1
Rotatable Bond Count0
Exact Mass96.0575 Da
Monoisotopic Mass96.0575 Da
Topological Polar Surface Area17.100 Ų
Heavy Atom Count7
Formal Charge0
Complexity122.000
Isotope Atom Count0
Defined Atom Stereocenter Count0
Undefined Atom Stereocenter Count0
Defined Bond Stereocenter Count0
Undefined Bond Stereocenter Count0
The total count of all stereochemical bonds0
Covalently-Bonded Unit Count1
Sicherheit und Gefahren (GHS)
Signal
Warning
Gefahrenhinweise

H226:Flammable liquid and vapor

H315:Causes skin irritation

H319:Causes serious eye irritation

H335:May cause respiratory irritation

Sicherheitshinweise

P210:Keep away from heat, hot surface, sparks, open flames and other ignition sources. - No smoking.

P240:Ground/bond container and receiving equipment.

P241:Use explosion-proof [electrical/ventilating/lighting/.../] equipment.

P242:Use only non-sparking tools.

P243:Take precautionary measures against static discharge.

P261:Avoid breathing dust/fume/gas/mist/vapors/spray.

P264:Wash hands [and …] thoroughly after handling.

P271:Use only outdoors or in a well-ventilated area.

P280:Wear protective gloves/protective clothing/eye protection/face protection.

P312:Call a POISON CENTER or doctor/... if you feel unwell.

P362:Take off contaminated clothing.

P302+P352:IF ON SKIN: wash with plenty of water.

P303+P361+P353:IF ON SKIN (or hair): Take off Immediately all contaminated clothing. Rinse SKIN with water [or shower].

P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

P332+P313:IF SKIN irritation occurs: Get medical advice/attention.

P337+P313:IF eye irritation persists: Get medical advice/attention.

P370+P378:In case of fire: Use ... to extinguish.

P405:Store locked up.

P403+P233:Store in a well-ventilated place. Keep container tightly closed.

P403+P235:Store in a well-ventilated place. Keep cool.

P501:Dispose of contents/container to an approved waste disposal plant.

Lösungsrechner
Bewertungen

Kundenbewertungen

Application Protocols

No antibody/assay protocols apply to this small-molecule reagent.

  • General laboratory guidance (not item-specific)
    • For reaction screening: prepare stock solutions in dry solvent (e.g., 0.5–1.0 M in THF or Et2O) under inert gas to facilitate dosing.
    • For analytical QC: analyze by GC-FID/GC–MS (volatile), and 1H/13C NMR in CDCl3 or acetone-d6. Confirm identity with IR (strong C=O near 1750–1780 cm−1 typical for strained cyclobutanones; literature value range).

Refer to your specific application SOPs; this listing provides no validated bioassay protocols.

Biological Roles
  • Item-specific biological data: Not specified for this item; refer to primary literature if needed.

  • General context (not item-specific)

    • spiro[2.3]hexan-4-one is a small, non-natural alicyclic ketone used primarily as a synthetic building block. It has no known endogenous biological role in mammals, plants, or microbes.
    • Spirocyclic motifs are of interest in chemical biology and medicinal chemistry because they increase three-dimensionality and can modulate physicochemical properties (e.g., polarity, shape complementarity). However, such statements pertain to structural classes rather than this specific compound’s bioactivity.
    • Reactivity considerations: as a neutral ketone, it can act as a hydrogen-bond acceptor; enol/enolate formation may occur under basic aqueous conditions, but the compound is not a buffer and is not typically used in biochemical assays except as a hydrophobic ligand precursor or probe intermediate.

Research use only. No clinical, diagnostic, or in vivo claims are made for this material.

Buffer Applications

This compound is a hydrophobic spirocyclic ketone and is not used as a buffering agent or pH stabilizer.

  • Not typically applicable: It lacks acid/base functionality in water over typical laboratory pH ranges and does not form defined buffer systems.
  • Practical note: When used in biochemical contexts, it is generally dissolved in organic cosolvents (e.g., DMSO, EtOH) at low percentages prior to dilution, if compatibility allows.

For buffering needs, select established systems (e.g., phosphate, HEPES, acetate) appropriate to your pH window and ionic strength requirements.

Green Alternatives

While the compound itself is a reagent/substrate, greener choices often relate to solvent and oxidant/base selection.

  • Greener solvent options (general guidance)

    • Replace THF/Et2O with 2-MeTHF or CPME when compatible (renewable origin, higher boiling point, easier phase separation).
    • Favor EtOAc or Me-THF over DCM/CHCl3 for workups and extractions when reaction compatibility allows.
  • Oxidations and functionalizations

    • Baeyer–Villiger: consider H2O2-based systems (e.g., peracetic acid generated in situ, or catalytic systems using H2O2 in MeCN/H2O) instead of mCPBA, balancing selectivity and safety.
    • Organocatalysis: where feasible, use organocatalysts in greener solvents to avoid heavy-metal residues.
  • Comparison snapshot (general; not item-specific)

    • DCM vs EtOAc: EtOAc is biodegradable and less problematic toxicologically; may require longer reaction times or different catalysts.
    • THF vs 2-MeTHF: 2-MeTHF often provides similar reactivity with improved safety profile (lower peroxide formation tendency and better water handling), but may alter enolate geometry or rates.
  • Waste minimization

    • Apply microscale optimization (DoE) to minimize solvent volumes; use solvent recycling where permitted. Evaluate life-cycle impacts of chosen reagents via tools like CHEM21 or solvent selection guides.
Pharmaceutical Uses
  • Item-specific regulatory/excipient status: Not specified for this item; refer to CoA/Spec Sheet.

  • General context (not item-specific; no therapeutic claims)

    • Role in discovery chemistry: spirocyclic ketones like spiro[2.3]hexan-4-one are frequently used as 3D-rich fragments or intermediates to access spiro-lactones, spiro-amines, and substituted scaffolds with improved shape diversity.
    • Formulation relevance: As a small, volatile organic compound with limited aqueous solubility, it is not used as an excipient. When incorporated into candidate molecules, standard formulation principles apply to the derived API, not to this starting material.
    • Process considerations: If used in GMP-related routes (early stages), establish impurity fate-and-purge strategies; confirm residual levels via validated GC methods due to volatility.

All uses are for research and process development only; no medical or diagnostic use is implied.

Physical Properties
  • Item-specific (from Product Data)

    • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
    • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
  • Storage/Shipping (from Product Data)

    • Storage conditions: Room temperature
    • Shipped in: Normal
  • Literature/general properties (for context; not item-specific)

    • Physical state: typically a low–molecular weight, low-polarity cyclic ketone; often a colorless liquid for analogous small cycloalkanones.
    • Polarity: aprotic, moderately polar (due to C=O), capable of H-bond acceptance only.
    • Water solubility: expected low to modest (typical of small alicyclic ketones), fully miscible with many organic solvents (Et2O, THF, DCM, toluene, EtOAc).
    • Volatility: anticipated relatively high (small MW); handle in well-ventilated hoods.
    • Density, refractive index, bp/mp, logP, pKa: Not specified for this item; consult primary literature and CoA/SDS for exact values.

Notes

  • Strain in the spiro system can modestly elevate reactivity compared to acyclic ketones; this may affect boiling behavior and reaction kinetics. Always verify exact physical constants from reliable references before process design.
Quality and Grades
  • Item-specific status

    • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
    • Stabilizers/inhibitors: Not specified for this item; refer to CoA/Spec Sheet.
  • Guidance for professional users (general)

    • For synthetic applications (e.g., enolate chemistry, Baeyer–Villiger oxidation), trace water and acids/bases can influence selectivity and yield. If grade is unspecified, consider drying over molecular sieves or distillation prior to moisture-sensitive steps.
    • Chromatographic work: If using as a GC standard or in kinetic studies, low UV background and low non-volatile residue are desirable; HPLC/GC grades of solvents and reagents should be paired appropriately.
    • Documentation: Request a Certificate of Analysis for batch-specific purity, residual solvent profile, and any stabilizers. Confirm identity by GC/MS or 1H/13C NMR as needed for regulated workflows.
  • What a grade typically implies (general)

    • Analytical/Reagent grade: suitable for most lab syntheses.
    • High-purity/≥98–99%: tighter impurity limits; preferred for mechanistic or asymmetric catalysis studies.
    • Note: In the absence of an explicit grade on this listing, treat this material as a research chemical and verify suitability via incoming QC.
Reaction and Applications

Applications below are based on general literature for strained spirocyclic ketones and are provided for context; they are not item-specific specifications.

  • Electrophilic carbonyl chemistry

    • Nucleophilic additions: Reacts with organomagnesium or organolithium reagents to afford tertiary/secondary alcohols at C=O. Strain may influence regio- and stereochemical outcomes.
    • Reductions: Selective reduction to the corresponding secondary alcohol (e.g., NaBH4, DIBAL-H). Catalytic hydrogenation may target substituents if present.
  • Enolate/alpha-functionalization

    • Enolate generation with LDA/LiHMDS enables alpha-alkylation, halogenation, or aldol-type reactions. The ring strain and spiro topology can bias enolate geometry and reactivity.
  • Rearrangements/oxidations

    • Baeyer–Villiger oxidation of the cyclobutanone subunit to give the corresponding lactone; migratory aptitude and ring strain often favor specific migration pathways.
    • Photochemical and acid/base-promoted ring openings are documented for small-ring ketones, enabling access to linear or expanded frameworks.
  • Synthesis/medchem relevance

    • The spiro[2.3] motif provides 3D-rich scaffolds valued in fragment-based and lead-like libraries. The ketone serves as a linchpin for diversification.
  • Practical tips

    • Control moisture for enolate chemistry; dry glassware and inert atmosphere improve reproducibility.
    • Monitor reactions by GC or 1H NMR; small, volatile products may require low-temperature sampling and sealed-vial analytics.
    • Avoid prolonged strong basic conditions that can induce ring opening or oligomerization.
Reaction Conditions

General literature guidance for small alicyclic ketones; verify on your system. Not item-specific specifications.

  • Enolate generation and alpha-functionalization

    • Base: LDA or LiHMDS (1.0–1.5 equiv)
    • Solvent: dry THF, 2-MeTHF, or toluene
    • Temperature: −78 to −20 °C to control selectivity; warm to 0–25 °C for quench/trapping
    • Notes: Titrate base; rigorously exclude moisture/air. Quench with NH4Cl or AcOH at low temperature.
  • Nucleophilic addition to C=O (e.g., Grignard)

    • Reagent: RMgX (1.1–2.0 equiv)
    • Solvent: Et2O or THF
    • Temperature: 0 °C to room temperature
    • Notes: Add ketone to Grignard to limit overreaction; monitor by TLC/GC.
  • Baeyer–Villiger oxidation

    • Oxidant: mCPBA (1.2–2.0 equiv) or H2O2/peracid systems
    • Solvent: DCM, CHCl3, or EtOAc
    • Temperature: 0–25 °C
    • Notes: Buffer acidity (NaHCO3 wash) to remove acids; check for over-oxidation.
  • Reduction to alcohol

    • Reagent: NaBH4 (methanol/ethanol) or selective hydrosilanes with catalysts
    • Temperature: 0–25 °C
  • Workup/purification

    • Use buffered aqueous quench to avoid base-promoted ring opening. Purify by silica chromatography with hexanes/EtOAc, minimizing exposure to strong bases.

Reported yields and times are substrate- and setup-dependent; optimize via small-scale trials.

Safety and Handling
  • Item-specific hazard data (from Product Data)

    • Signal word: Not specified for this item; refer to SDS.
    • H-statements: Not specified for this item; refer to SDS.
    • GHS classification/pictograms: Not specified for this item; refer to SDS.
  • General safety considerations for small alicyclic ketones (literature/general; not item-specific)

    • Flammability: Many low-MW ketones are flammable liquids/vapors; keep away from ignition sources. Use in a fume hood.
    • Irritation: Vapors may be irritating to eyes/respiratory tract; liquid may cause skin/eye irritation. Wear appropriate PPE (lab coat, nitrile gloves, splash goggles).
    • Incompatibilities: Strong oxidizers (risk of exotherm), strong bases/acids (can promote condensation, rearrangement, or ring-opening), reducing agents (may reduce carbonyl).
    • Handling tips: Minimize headspace to reduce volatilization; use cold traps when evaporating. Avoid prolonged exposure to base to limit undesired polymerization or aldol-type pathways.
    • First aid (overview; defer to SDS): Move to fresh air if inhaled; rinse eyes/skin with water for several minutes; remove contaminated clothing. Seek medical attention if symptoms persist.

Always consult the product-specific SDS for authoritative hazard classifications, exposure limits, and emergency procedures. Research use only.

Solvent Selection

This product is a substrate/reagent (a small cyclic ketone), not a solvent. Selection below refers to solvents to handle or react with spiro[2.3]hexan-4-one.

  • General miscibility/solubility (literature/general)

    • Expected to dissolve well in ethers (THF, MTBE, Et2O), chlorinated solvents (DCM, CHCl3), esters (EtOAc), and aromatics (toluene). Limited solubility in water.
  • Solvent choice by operation

    • Enolate chemistry: anhydrous THF, MTBE, or toluene with strong bases (e.g., LDA, LiHMDS) at subambient temperatures to control selectivity.
    • Nucleophilic additions (e.g., Grignard): Et2O or THF under inert atmosphere.
    • Oxidations (Baeyer–Villiger): DCM, CHCl3, or EtOAc with peracids; greener options include MeCN/H2O or EtOAc with H2O2 and catalysts.
    • Purification: Normal-phase silica gel with hexanes/EtOAc gradients; monitor for potential ring-opening under strongly basic eluents.
  • Quick comparison (general)

    • THF: excellent for enolization; peroxide formation on storage is a concern (solvent-specific).
    • 2-MeTHF: greener alternative to THF with similar polarity, better hydrophobicity for extractions.
    • DCM: good for peracid oxidations; consider environmental/health aspects and use greener substitutes when feasible.

Always validate solvent compatibility with your specific catalyst/base and consult the SDS for each solvent.

Storage and Reconstitution
  • Item-specific (from Product Data)

    • Storage conditions: Room temperature
    • Shipped in: Normal
  • General storage guidance (not item-specific)

    • Keep container tightly closed in a cool, well-ventilated place. Minimize headspace to limit volatilization.
    • Protect from strong acids/bases and oxidants. Store away from ignition sources.
    • For moisture-sensitive operations, consider storing under inert gas (argon or nitrogen) and drying prior to use (e.g., with 3 Å molecular sieves) if compatible.
  • Reconstitution/Preparation for use

    • This is supplied neat (no reconstitution buffer). For solution preparation, use anhydrous organic solvents (THF, Et2O, toluene, DCM, or EtOAc) as required by your application.
    • Filter solutions through PTFE syringe filters (0.22–0.45 µm) if particulate contamination is a concern.

Research use only. Consult the CoA and SDS for batch-specific guidance (stability, purity, and handling).

Structure and Identity

Brief overview: spiro[2.3]hexan-4-one is a compact, strained bicyclic ketone featuring a spiro junction between a cyclopropane and a cyclobutanone ring.

  • Item-specific (from Product Data)

    • SKU: S175656
    • Product name: spiro[2.3]hexan-4-one
    • CAS: 20571-15-7
    • InChIKey: 259060 (as provided)
    • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/computed identity (general reference; not item-specific specs)

    • Typical molecular formula (literature): C6H8O
    • Typical molecular weight (literature): ~96.13 g/mol
    • Core functional group: saturated alicyclic ketone (cyclobutanone subunit) at the spiro center
    • Structural features: a spiro-fused bicyclic framework where a 3-membered ring (cyclopropane) and a 4-membered ring (bearing the carbonyl) share a single quaternary spiro carbon.
  • 2D structure description (general)

    • The carbonyl carbon is within the 4-membered ring (cyclobutanone). The spiro quaternary carbon connects the cyclopropane and cyclobutanone rings orthogonally. No defined stereocenters other than the spiro junction (which is not stereogenic).
Synthetic Utility
  • Functional group leverage

    • Carbonyl electrophile enables nucleophilic additions, reductions, and imine/enamine formation (with amines under dehydrating conditions).
    • Alpha-chemistry via enol/enolate gives halogenation, alkylation, and aldol-type couplings. The spiro topology can impart stereochemical control in downstream steps.
  • Ring strain as a driver

    • The cyclobutanone subunit is ring-strained; Baeyer–Villiger oxidation efficiently converts it to a gamma-lactone, often under mild conditions.
    • Acid/base or photochemical conditions can trigger ring opening or rearrangement, furnishing synthetically useful linear or larger-ring frameworks.
  • Retrosynthetic handle

    • The ketone serves as a convergent junction to append substituents on either ring after selective functionalization, enabling access to densely functionalized spirocycles.
    • Protecting-group-free strategies are feasible due to the single key functional handle (C=O), simplifying routes when orthogonality is maintained.
  • Typical downstream transformations (literature/general)

    • Oxime/hydrazone formation for further Beckmann-type or Wolff–Kishner pathways (where appropriate).
    • Catalytic enantioselective alpha-functionalizations using organocatalysts (e.g., enamine catalysis) to introduce stereochemistry adjacent to the carbonyl.
Target Specificity

Not applicable. This product is a small organic molecule (spirocyclic ketone), not a biological macromolecule or affinity reagent. No antigen/epitope, clone, isotype, or species reactivity applies.

Dürfen wir Sie über Rabattaktionen informieren?

Später erinnern

Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.

Hoppla! Benachrichtigungen sind deaktiviert.