Stafib-2 is a potent and selctive inhibitor of the transcription factor STAT5b , with an IC 50 of 82 nM and 1.7 μM for STAT5b and STAT5a , respectively. Stafib-2 exhibits poor cell permeability
In Vitro
Stafib-2 has an extremely high affinity for STAT5b (K i =8.8 nM). Stafib-2 (3-10 μM; 4-48 h) does not show significant activity in K562 and MDA-MB-231 cells. MCE has not independently confirmed the accuracy of these methods. They are for reference only.
IC50& Target:IC50: 82 nM (STAT5b)
Spezifikationen
Spezifikationen & Reinheit
10mM in DMSO
Biochemische und physiologische Mechanismen
Stafib-2 is a potent and selctive inhibitor of the transcription factor STAT5b , with an IC 50 of 82 nM and 1.7 μM for STAT5b and STAT5a , respectively. Stafib-2 exhibits poor cell permeability.
Storage
Store at -80°C
Verschickt in
Dry ice packs + Cold packs
Dieses Produkt erfordert Kühlkettenversand. Grundversand und andere Economy-Optionen sind nicht verfügbar.
Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Lösungsrechner
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Bewertungen
Kundenbewertungen
Application Protocols
No validated application protocols are provided for this item in the Product Data. The following are general, non-specific recommendations for small-molecule library compounds.
Stock preparation:
Dissolve in anhydrous DMSO to 10–50 mM. Vortex and, if needed, sonicate briefly. Filter (0.22 µm PTFE) if particulate is observed.
Aliquot into low-bind microtubes or glass vials; store at –80°C. Avoid repeated freeze–thaw.
Working solutions:
Dilute into assay buffer or media to desired concentration, keeping final DMSO ≤1–2% v/v.
Include vehicle controls at matching DMSO levels.
Documentation: Record lot number, preparation date, concentration, and storage conditions on each aliquot.
Analytical check: Confirm concentration by UV or qNMR when assay sensitivity requires high dosing precision.
Biological Roles
No biological function, pathway association, or target annotation is provided for this product entry. Do not infer pharmacology from the product name alone.
Target/mechanism: Not specified for this item; refer to CoA/Spec Sheet or relevant literature tied to the CAS/CID if available to your team. Aladdin Scientific does not provide medical or therapeutic claims.
Intended context of use: Research use only, suitable for in vitro experimentation and method development.
Experimental best practices (general):
Run concentration–response assessments with appropriate vehicle controls to identify nonspecific effects.
Include counterscreens for fluorescence/absorbance interference if using optical readouts.
Confirm stability in assay media (time-course LC-MS), as degradation can confound biological readouts.
Buffer Applications
This item is not supplied as a buffering agent, and no acid/base characteristics are provided.
Buffer use: Not typically applicable. If preparing aqueous working solutions for assays, use standard biological buffers (e.g., PBS, HEPES, Tris) appropriate to your system, introducing the compound from an organic stock (commonly DMSO) with final organic content ≤1–2%.
Practical guidance: Verify compatibility with buffer components (e.g., avoid reactive amines or nucleophiles if the compound is electrophile-prone—structure-dependent). Monitor for precipitation upon dilution.
Green Alternatives
Green chemistry considerations focus here on solvent and handling choices rather than replacement of the compound itself, since the structure and function are not disclosed.
Prefer lower-toxicity solvents where assay tolerance permits: ethanol, isopropanol, or water with minimal DMSO cosolvent.
Minimize DMSO volume in working solutions (≤1%) to reduce environmental load and improve biocompatibility.
Implement microscale experimentation to reduce waste generation; employ high-throughput miniaturization.
Waste management: Segregate halogenated from non-halogenated streams. Use adsorbent-based solidification for spill control to avoid water contamination.
DMSO: Excellent solvency; high boiling point; disposal burden higher; good for stocks.
Ethanol: Renewable feedstock, lower toxicity; limited solvency for some hydrophobes; evaporates readily.
Acetonitrile: Good for LC; higher toxicity; generated as byproduct in acrylonitrile production; use sparingly.
Trade-offs: Greener solvents may reduce solvency or compound stability; validate solubility, stability, and assay performance as part of method selection.
Pharmaceutical Uses
No excipient role, compendial status, or formulation information is provided. This product is supplied strictly for research use only and is not intended for human or veterinary use.
Formulation/excipient status: Not specified for this item; refer to CoA/Spec Sheet.
Preformulation considerations for research prototypes (general):
Solubility enhancement strategies may include cosolvents (DMSO/EtOH), cyclodextrins, or lipid vehicles for in vivo model development within institutional approvals; however, Aladdin provides no clinical guidance.
Stability screening under ICH-like stress conditions (light, heat, oxidative) can inform storage and handling in research settings.
Regulatory note: Not supplied with pharmacopeial certification; not for use in diagnostic or therapeutic applications.
Physical Properties
Item-specific physicochemical data were not supplied with this product record. Values below are not assumed; please consult the CoA/Spec Sheet for definitive specifications.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Melting point: Not specified for this item; refer to CoA/Spec Sheet.
Boiling point: Not specified for this item; refer to CoA/Spec Sheet.
Density: Not specified for this item; refer to CoA/Spec Sheet.
Refractive index: Not applicable/unknown (solid vs liquid state not specified).
pKa, logP/logD: Not specified for this item; refer to CoA/Spec Sheet.
Solubility: Not specified for this item; refer to CoA/Spec Sheet.
Practical guidance (general, method-focused):
For unknown small molecules used in screening, an initial solubility screen typically includes DMSO (up to 20–50 mg/mL), DMF, and ethanol as organic vehicles; then prepare working dilutions into aqueous buffers with ≤1–2% final organic content to mitigate precipitation.
If the compound is provided as a powder, assess hygroscopicity by weighing before/after brief ambient exposure and store under inert atmosphere as needed.
For UV/Vis or LC-MS characterization, use small test aliquots to avoid freeze–thaw cycling of the primary container.
Quality and Grades
Item-specific grade/purity is not listed in the Product Data.
Grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
What the grade implies (general guidance):
Screening/biochemical grade typically emphasizes identity confirmation (e.g., NMR, LC-MS) and adequate purity for in vitro assays, often ≥95% by HPLC/LC.
Analytical or HPLC grade pertains mainly to solvents/reagents with low UV background and trace impurities; this may not apply to a solid screening compound unless designated.
Identity and characterization: For small-molecule library members, a typical documentation set may include LC-MS purity, retention time, and 1H NMR. Request batch-specific CoA for exact data.
Stabilizers: None specified. If stabilizers are present for certain compounds (e.g., acids/bases, antioxidants), they will be noted on the CoA.
Lot-to-lot considerations: When replicating assays, retain the lot number and CoA to ensure reproducibility, as minor impurity profiles can influence bioassay outcomes.
Reaction and Applications
This product is positioned as a small-molecule/compound-library member for research use. Without structural information, it is not feasible to outline specific synthetic or catalytic applications.
Typical applications for such items (general):
Exploratory in vitro studies, chemical biology screening, and profiling in biochemical or cell-based assays.
Method development for LC-MS quantification and stability testing (forced degradation, pH, light, oxidative conditions) to support assay robustness.
Not typically used as a building-block reagent: In the absence of structure, no recommendations can be made for cross-coupling, protection/deprotection, or other named reactions.
Experimental tips for assay use:
Verify concentration by UV/Vis or quantitative NMR when possible to ensure accurate dosing from cryostocks.
Minimize freeze–thaw cycles by preparing single-use aliquots.
Evaluate adsorption losses on plastics; use low-bind tubes or glass vials if recovery issues are observed.
Reaction Conditions
No reaction conditions can be recommended absent structural/functional-group data.
General method-development advice for small-molecule handling (not a specification):
Dissolution and transfer: Prepare concentrated stocks in DMSO (e.g., 10–50 mM) and dilute into the reaction or assay medium while mixing to avoid localized supersaturation.
Stability checks: Run small-scale tests across pH 2–9, common redox conditions (e.g., 0.1–1 mM H2O2 as a screen), and light exposure to understand degradation pathways before critical experiments.
Analytical monitoring: Use LC with PDA and MS detection to capture degradation/impurity growth and to quantify concentration during time-course studies.
Safety and Handling
GHS details are not provided in the Product Data for this item. Always consult the SDS for authoritative hazard, handling, and emergency information.
Signal word: Not specified for this item; refer to SDS.
Hazard (H-) statements: Not specified for this item; refer to SDS.
GHS classification and pictograms: Not specified for this item; refer to SDS.
General laboratory precautions (good practice):
PPE: Wear lab coat, safety glasses, and suitable chemical-resistant gloves (e.g., nitrile). Handle powders in a fume hood to minimize inhalation exposure.
Avoid skin/eye contact and inhalation of dust or aerosols. Use closed containers and antistatic measures when manipulating fine powders.
Incompatibilities: Without structural information, avoid strong oxidizers/reducers, strong acids/bases, and elevated temperatures until compatibility is known.
First aid (overview; defer to SDS): In case of skin/eye contact, rinse with water for at least 15 minutes and seek medical attention. If inhaled, move to fresh air. If swallowed, rinse mouth and seek medical advice—do not induce vomiting unless instructed by medical personnel.
Waste: Collect as organic chemical waste; segregate halogenated vs non-halogenated solvents when applicable. Follow institutional hazardous waste procedures.
Note on cryogenic shipping: Product is shipped on dry ice/cold packs; open carefully and allow any trapped CO2 to dissipate before container access.
Solvent Selection
Because structural and solubility data are not provided, solvent selection should follow a staged screening approach suitable for small-molecule library compounds.
Primary stock solvent: DMSO is generally preferred for screening compounds due to broad solvency and assay compatibility at ≤1–2% v/v.
Secondary options: DMF, ethanol, isopropanol, and acetonitrile can be evaluated if DMSO solubility is inadequate or assay constraints require alternatives.
Aqueous compatibility: Prepare working solutions by diluting organic stocks into buffered saline (e.g., PBS, HEPES, or Tris) while monitoring for precipitation and turbidity. Sonication or gentle heating (≤37°C) may aid dissolution.
Dielectric/polarity considerations (general):
Polar aprotic: DMSO, DMF, acetonitrile assist dissolution of heterocycles and polar scaffolds.
Protic: EtOH/iPrOH offer improved biocompatibility but lower solvency for some lipophilic solids.
Practical tips:
Start at 10–20 mM in DMSO. If insoluble, try serial cosolvent blends (e.g., DMSO:water 1:1 for test; MeCN:water 1:1) to assess precipitation risk.
Filter 0.22 µm when compatible to remove particulates before sensitive assays or LC analysis.
Storage and Reconstitution
Storage and shipping details for this item are provided in the Product Data.
Storage conditions: Store at –80°C (from Product Data). Protect from moisture and light until structural/stability data indicate otherwise.
Shipped in: Dry ice packs + cold packs (from Product Data). Inspect upon arrival; if thawing occurred, evaluate integrity before use.
Container handling:
Upon first opening, allow the vial to equilibrate to room temperature in a desiccated environment to prevent condensation. Quickly reseal after aliquoting.
If supplied as a solution, purge headspace with inert gas (e.g., nitrogen or argon) before returning to cold storage.
Reconstitution (general guidance):
Solvent: DMSO recommended as a first-choice stock solvent when structure/solubility are unknown.
Concentration: Typical 10–50 mM stocks. Verify complete dissolution; brief warming to 25–37°C and/or sonication may be used.
Stability:
Long-term stability is not specified for this item; refer to CoA/Spec Sheet. To mitigate degradation, store as single-use aliquots and minimize freeze–thaw cycles.
Research use note: For research use only (from Product Data).
Structure and Identity
Brief overview: Stafib-2 is listed as a small-molecule product in our compound library portfolio. Detailed structural identifiers are not provided in the current product record.
Chemical name: Not specified for this item; refer to CoA/Spec Sheet.
Synonyms: Not specified for this item; refer to CoA/Spec Sheet.
CAS: 2097938-74-2 (from Product Data)
PubChem CID: 129896883 (from Product Data)
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
Structural features: Not specified for this item. Without a provided structure, ring systems, stereocenters, and functional group annotations cannot be detailed.
2D structure description:
Not available in the provided Product Data. If required for informatics registration, please consult the CoA/Spec Sheet or request the structure file (SDF/MOL) from Aladdin Scientific customer support.
Synthetic Utility
Without structural information, specific synthetic transformations or functional-group reactivity cannot be described for this item.
General note: Library compounds are typically used as assay probes rather than as reagents or building blocks. If you intend to use the material synthetically, request structural data and impurity profile to evaluate compatibility with planned reactions.
If structure becomes available:
Map functional groups (e.g., halides, heteroatoms, carbonyls) to potential cross-couplings, condensations, or late-stage derivatizations.
Assess protecting-group liabilities and redox stability prior to multistep sequences.
Characterization: Employ LC-MS, 1H/13C NMR, and, if chiral, chiral HPLC to confirm integrity before and after transformations.
Target Specificity
Target, epitope, and species reactivity information are not applicable; this product is not an antibody or biologic. No target specificity data are provided in the Product Data.
Target: Not specified for this item; refer to CoA/Spec Sheet.
Tested systems: Not specified.
Notes: If leveraging this compound as a probe, independently verify target engagement using orthogonal assays (e.g., biophysical binding plus functional readout), as appropriate for your research.
Häufig gestellte Fragen
How should this product be stored?
Store at ?80 °C. Ultra-low temperature storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships frozen with dry ice and cold packs. Unpack on arrival and transfer it to the storage condition stated above; handle dry ice with insulated gloves in a ventilated area.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 2097938-74-2, the molecular formula is C28H26N2O12P2, and the molecular weight is 644.46 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Wir verwenden Cookies, um die ordnungsgemäße Funktion der Website sicherzustellen und, soweit zulässig, Ihr Nutzererlebnis zu verbessern. Sie können Ihre Einstellungen jederzeit unter „Einstellungen“ verwalten. Weitere Informationen finden Sie in unserer Cookie-Richtlinie.
Dürfen wir Sie über Rabattaktionen informieren?
Später erinnern
Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.