TPY Agar Medium - BioReagent

Cat. No.: T1528592
Zu bestellen verfügbar
QUALITÄT & REINHEIT BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Größe
Deutschland (EU)
USA*
Preis
Menge
250g
T1528592-250g
Auf Bestellung · 8–12 Wochen
147,43€
Enter a quantity for the sizes you want to add.

Übersicht

For isolation and cultivation of Bifidobacterium

Spezifikationen

Spezifikationen & Reinheit
BioReagent
Storage
Room temperature
Verschickt in
Normal
Note
BioReagent
Product Line
Biologische Produkte

Erweiterte Daten

Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Lösungsrechner
Bewertungen

Kundenbewertungen

Application Protocols

The following protocol outlines general, literature‑based practices for preparing and using TPY‑type agar. Item‑specific instructions (mass per liter, pH targets, sterilization parameters) are Not specified for this item; refer to CoA/Spec Sheet and your lab SOPs.

Preparation (literature/general):

  • Weigh the dehydrated medium per the label’s grams per liter. Disperse in purified water with gentle stirring to avoid clumps and foaming.
  • Heat as needed to fully suspend/hydrate agar. Adjust pH only if directed by the product instructions.
  • Sterilize by autoclaving using a validated cycle (e.g., 121 °C; time per vessel volume — follow SOP). Avoid excessive hold times to prevent nutrient degradation.
  • Cool to ~45–55 °C (literature) before pouring plates in a sterile environment. Allow plates to solidify and, if required, dry to remove surface moisture.

Use:

  • For anaerobes/propionibacteria, pre‑reduce plates in an anaerobic jar/chamber (literature) before inoculation.
  • Streak or spread samples using sterile technique. Include positive control strains and sterility controls.
  • Incubate at organism‑appropriate temperature and atmosphere (literature examples for propionibacteria: ~28–32 °C, anaerobic/microaerophilic, several days).

Quality checks:

  • Inspect for contamination and uniform gel strength. Perform growth promotion testing with representative strains when qualifying new lots.

Disposal:

  • After use, decontaminate plates via autoclave or chemical disinfectant per biosafety policy.
Biological Roles

While TPY Agar Medium is not a biological molecule per se, it is designed to support biological processes in microbial cultivation.

Functional roles in culture (literature/general):

  • Carbon and energy: Propionate (from a propionate salt typically included in TPY‑type media) serves as a carbon source and can promote growth of propionibacteria, organisms that metabolize lactate and propionate through the Wood–Werkman cycle.
  • Nitrogen and growth factors: Tryptone/peptone deliver peptides, free amino acids, and small oligopeptides, while yeast extract provides B‑vitamins (e.g., niacin, riboflavin), nucleotides, and trace cofactors that support biosynthesis and rapid growth.
  • Solid support: Agar, a sulfated galactan, forms a non‑nutritive gel with high melting–setting hysteresis, enabling colony isolation and differential morphology assessment without being readily metabolized by most bacteria.
  • Selectivity and suppression: Propionate and controlled pH/osmolarity can modulate community composition, favoring propionibacteria over faster‑growing competitors in mixed samples (literature). Final selectivity depends strongly on incubation atmosphere (aerobic vs anaerobic) and temperature.

Research contexts:

  • Dairy/fermentation microbiology: Enumeration of propionibacteria in cheese matrices; studying CO2 and flavor compound formation during ripening.
  • Metabolic studies: Investigation of propionate assimilation, vitamin B12 biosynthesis, and redox balancing in propionibacteria (research use only).

Note: Exact component concentrations and performance characteristics for this item are Not specified for this item; refer to CoA/Spec Sheet.

Buffer Applications

This product is a complex growth medium rather than a defined buffer system. It is not typically used for precise pH buffering or biochemical assays requiring known buffer capacity.

  • If a buffered environment is required, prepare the medium exactly as directed on the product label (which may include intrinsic buffering capacity from phosphates or amino acids). Specific buffer composition/pH targets for this item: Not specified for this item; refer to CoA/Spec Sheet.
  • For analytical or enzyme assays, use a defined buffer (e.g., phosphate, HEPES, MOPS) and, if needed, overlay or supplement onto plates prepared from this medium following validated protocols.
Green Alternatives

Sustainability considerations for culture media focus on resource inputs, process energy, and waste minimization rather than solvent substitution.

Greener practice options (literature/general):

  • Energy efficiency: Optimize autoclave loads and cycles to minimize energy and water usage. Avoid over‑autoclaving that necessitates rework.
  • Right‑sizing preparation: Prepare only the amount of medium needed to reduce expired plate waste. Use smaller bottle volumes to improve heat transfer and reduce cycle time.
  • Reusable glassware: Where compatible with your biosafety level and QA requirements, use reusable glass media bottles and plate racks to reduce single‑use plastics.
  • Alternative nutrients: Some labs adopt plant‑based peptones/tryptones and sustainably sourced yeast extracts to reduce animal‑derived inputs (evaluate growth performance equivalency before adoption; literature).
  • Waste handling: Decontaminate media via validated autoclave cycles, then segregate for appropriate recycling/energy‑from‑waste streams where permitted.

Comparison (general, qualitative):

  • Dehydrated media vs. ready‑to‑use plates: Dehydrated powders lower shipping mass/volume and packaging waste but require on‑site sterilization energy. Ready‑to‑use plates reduce in‑house energy but increase packaging and cooled transport footprints. Choose based on local utilities, throughput, and QA needs.

Note: Any formulation change (e.g., switching peptone source) may alter growth/selectivity. Validate greener substitutions against your critical microorganisms and acceptance criteria before implementation.

Pharmaceutical Uses

Not a therapeutic product. No clinical or medical claims are made.

Relevant non‑clinical/industrial contexts (literature/general):

  • Microbiological quality control: Solid media such as TPY‑type agar may be used in R&D and industrial microbiology labs (e.g., fermentation and food/dairy sectors) for cultivating specific microorganisms during development work or environmental monitoring studies where appropriate. Suitability must be established by the user.
  • Not a compendial medium unless explicitly stated. Pharmacopeial status, if any, and compliance with compendial growth promotion tests are Not specified for this item; refer to CoA/Spec Sheet.

Formulation/excipient role: None. This product serves solely as a laboratory culture medium for research use only.

Physical Properties

As a complex, dehydrated medium, exact physico‑chemical specifications depend on the proprietary blend.

Item‑specific data:

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Moisture/ash content, pH (at stated preparation), gel strength, and clarity: Not specified for this item; refer to CoA/Spec Sheet.
  • Density/bulk density: Not specified for this item; refer to CoA/Spec Sheet.

General properties (literature, typical for dehydrated agar media):

  • Physical form: Free‑flowing, heterogeneous powder/granules that are readily dispersible in water.
  • Solubility: Individual nutrients dissolve in water; agar hydrates and forms a colloidal suspension that yields a firm gel upon autoclaving and cooling (literature).
  • pH of prepared medium: Typically adjusted by formulation; common ranges for TPY‑type media after sterilization are near neutral to slightly acidic, but actual target pH must follow the item’s specification (not specified for this item).
  • Melting/setting behavior: Agar gels set upon cooling to ~35–45 °C and melt at ~85–95 °C (literature for agar). These are general agar characteristics and not item‑specific specifications.
  • Color/clarity (prepared): Usually light amber to tan, translucent to slightly opalescent depending on components (literature).

Note: Do not treat any of the above general values as product specifications. For method‑critical parameters (grams per liter, preparation pH, autoclave cycle, gel strength), consult the item’s label or CoA/Spec Sheet.

Quality and Grades
  • Grade: BioReagent (as listed for this item). This designation indicates suitability for general biological laboratory applications, including preparation of culture media and microbiological workflows. It emphasizes consistent performance in research settings but is not equivalent to clinical/diagnostic or GMP manufacturing grade.

What BioReagent means in practice:

  • Sourcing and blending intended for reproducible growth performance in research labs.
  • Not tested to pharmacopeial monographs unless expressly stated. No claim for clinical diagnostic use.
  • UV/fluorescence background, heavy metals, and ash/moisture limits are not implied unless specified on the CoA/Spec Sheet. For this item: Not specified for this item; refer to CoA/Spec Sheet.

Lot‑to‑lot consistency:

  • Complex media rely on controlled composition of peptones/yeast extracts. Reliable vendors maintain consistent raw materials and blending procedures to minimize variability in growth yields and colony morphology.

Stabilizers/indicators:

  • Some media include buffers, dyes, or selective agents. For this item, any such additives are Not specified for this item; refer to CoA/Spec Sheet.

Recommended practice:

  • Verify critical performance attributes (e.g., growth of target strains, colony counts) with in‑house controls when changing lots.
  • Retain CoA and, if provided, performance certificates. For regulated workflows, qualify each lot per your QA procedures.

Research use note: For research use only.

Reaction and Applications

Chemical reaction applications are not relevant for this product. Instead, the focus is microbiological use.

Microbiological applications (literature/general):

  • Cultivation and enumeration of propionibacteria: TPY‑type agar (tryptone/peptone–yeast extract–propionate with agar) is widely used for isolating and counting Propionibacterium spp., including dairy propionibacteria implicated in cheese ripening. Sodium or potassium propionate serves both as a carbon source and as a selective component favoring propionibacteria (literature).
  • Support for lactic acid bacteria (LAB) and related organisms: The rich nitrogen and vitamin content from peptone/tryptone and yeast extract can support a range of fermentative bacteria; selectivity depends on the exact formulation and incubation conditions (aerobic/anaerobic, temperature, pH) — confirm with the item’s specifications.
  • Colony morphology studies and isolation: Solid agar matrix enables discrete colonies for morphology assessment, purification streaking, and subsequent biochemical testing.
  • Food/dairy microbiology and fermentation R&D: Common in quality control and research for starter cultures, cheese ripening consortia, and metabolic studies of propionate formation and vitamin B12 biosynthesis (research context only).

Good practice tips:

  • Use fresh, correctly sterilized medium; excessive heat exposure can caramelize sugars and darken the medium, potentially inhibiting growth.
  • For anaerobes, pre‑reduce plates and incubate under validated anaerobic conditions (e.g., anaerobic jars with appropriate gas packs; literature guidance).
  • Include positive control strains and un‑inoculated sterility controls for each batch/lot.
Reaction Conditions

Chemical reaction conditions are not applicable. For microbiological culture conditions, consult organism‑specific literature.

General incubation guidance (literature, not item‑specific):

  • Propionibacteria: Often incubated at ~28–32 °C under anaerobic or microaerophilic conditions for several days due to slow growth. Exact temperature, atmosphere, and duration depend on the species/strain and matrix.
  • Pre‑reduction: For anaerobes, plates can be pre‑reduced by storing in an anaerobic environment before inoculation.
  • Colony development: Propionibacteria may require extended incubation (3–7+ days). Implement appropriate humidity control to prevent plate desiccation.

Important: Specific preparation details for this item (grams per liter, target pH before/after sterilization, autoclave cycle) are Not specified for this item; refer to CoA/Spec Sheet and follow your lab’s validated SOPs.

Safety and Handling

GHS classification and hazard statements for this specific item are not provided here. Always review the product’s SDS before use.

Item‑specific safety fields:

  • Signal word: Not specified for this item; refer to SDS.
  • H‑statements / P‑statements / GHS classification / pictograms: Not specified for this item; refer to SDS.

General laboratory safety guidance for dehydrated culture media (literature/practice):

  • Potential hazards: Dust may cause mechanical eye/respiratory irritation; spilled powder can be slippery on wet surfaces. Prepared plates/broths can harbor viable microorganisms after inoculation—treat as biohazardous waste per institutional policies.
  • PPE: Laboratory coat, safety glasses, and suitable gloves. Use a dust mask/respirator if handling large quantities that can aerosolize (per risk assessment and SDS).
  • Handling: Avoid creating dust; weigh in a fume hood or ventilated enclosure if possible. Use aseptic technique to avoid unintended contamination.
  • Incompatibilities: Strong oxidizers may degrade organic components; avoid contact with strong acids/bases that can hydrolyze nutrients or alter gelling. Do not autoclave sealed containers.
  • Sterilization: Autoclave prepared medium using a validated cycle per lab SOP. Do not over‑autoclave (may darken medium via Maillard reactions and reduce performance).
  • First‑aid (overview): If inhaled, move to fresh air; if in eyes, rinse cautiously with water; if on skin, wash with soap and water. If ingested or in case of exposure concerns, seek medical attention. Defer to SDS for authoritative instructions.
  • Waste: Autoclave or chemically disinfect used media/plates before disposal according to biosafety rules.
Solvent Selection

This product is a dehydrated microbiological medium intended to be reconstituted with purified water; organic solvent selection is not applicable.

Practical guidance (literature/general practice):

  • Use deionized or distilled water meeting your lab’s microbiology grade standard. High ionic strength or residual disinfectants (chlorine, ozone) can impair growth and gelling.
  • Reconstitution temperature: Cold water limits clumping; gentle stirring prevents foaming. Allow agar to fully hydrate before sterilization.
  • Avoid buffers or salts not specified by the product because they can alter osmolarity, pH, and gel strength.

Comparison with alternatives (general):

  • Water types: ASTM Type I/II are commonly used; Type III may be acceptable if endotoxin and conductivity specs meet your SOP.
  • Ready‑to‑use plates vs. in‑house preparation: Pre‑poured plates improve consistency and save time but reduce flexibility; dehydrated media offer cost control and customization.

If your application requires a defined solvent system (e.g., for antimicrobial assays with solvent‑dissolved compounds), prepare the TPY agar per instructions, then apply test compounds using validated overlay or disk‑diffusion methods to avoid bulk solvent exposure of the gel.

Storage and Reconstitution

Storage conditions for this item:

  • Listed storage: Room temperature. Protect from moisture. Keep container tightly closed to prevent caking and microbial contamination. Shipped at ambient conditions (Normal).

Shelf life:

  • Not specified for this item; refer to CoA/Spec Sheet. As with most dehydrated media, performance is best before the labeled expiry and when protected from humidity and heat.

Reconstitution (general, literature‑based guidance — not item‑specific specifications):

  • Water quality: Use deionized/distilled water meeting your microbiology grade standard.
  • Mass per liter: Not specified for this item; refer to CoA/Spec Sheet/label for the correct grams per liter.
  • Dissolution: Add powder gradually with stirring to minimize clumps. Gentle heating can aid agar hydration before sterilization.
  • Sterilization: Autoclave using a validated cycle per lab SOP. Do not autoclave sealed containers of unvented liquid medium.
  • Pouring: Cool to pouring temperature (literature ~45–55 °C), dispense aseptically, and allow to solidify.

Post‑preparation handling:

  • Store poured plates inverted in sealed sleeves or containers to minimize dehydration. For best performance, use freshly prepared plates; refrigerator storage can extend usable time but may cause condensation — equilibrate to room temperature before use (follow institutional SOPs).

Research use note: For research use only.

Structure and Identity

This product is a formulated, multi‑component microbiology medium rather than a single, defined chemical entity.

  • Item name: TPY Agar Medium (SKU: T1528592)
  • Type: Dehydrated culture medium containing nutrient components and agar (mixture; composition may include tryptone/peptone, yeast extract, propionate salt, minerals, and agar — literature). Exact formulation for this item: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not applicable to mixtures; not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not applicable to mixtures; not specified for this item; refer to CoA/Spec Sheet.
  • CAS number: Not applicable to mixtures; not specified for this item; refer to CoA/Spec Sheet.
  • InChIKey / SMILES: Not applicable to formulated mixtures.

Structural features (descriptive, literature):

  • Typical TPY media are composed of complex organic nitrogen sources (e.g., tryptone/peptone) supplying peptides and amino acids, yeast extract providing vitamins/cofactors, a propionate salt supporting propionibacteria, and agar as the gelling polysaccharide. No single 2D molecular structure represents the product.

Use context:

  • Designed for preparation of solid plates to cultivate and enumerate propionibacteria and related organisms (literature). Always confirm organism suitability against the item’s actual specification sheet.
Synthetic Utility

This product is not a chemical building block and has no typical role in small‑molecule organic synthesis.

  • For synthetic chemistry applications, refer instead to defined reagents, catalysts, and solvents. If microbial biocatalysis is part of a synthetic route, TPY Agar Medium (if suitable for the organism) may be used upstream for maintaining strains on plates prior to preparing production media; however, medium selection should be validated for the target organism and process.
Target Specificity

This product is not an antibody or affinity reagent; therefore, antigen/epitope specificity, clone, isotype, and species reactivity are not applicable.

Microbiological scope (literature/general):

  • TPY‑type media are commonly used for cultivation/enumeration of propionibacteria. Actual selectivity and growth performance for this specific item are Not specified for this item; refer to CoA/Spec Sheet and perform in‑house suitability testing with your target strains.

Benötigen Sie Hilfe bei der Auswahl der Qualität?

Unser Leitfaden zur Qualitätsauswahl behandelt Reinheit, Stabilisatorstatus und Anwendungseignung für alle Varianten in unserem Katalog.

BioReagent Qualitätsleitfaden ansehen →

Dürfen wir Sie über Rabattaktionen informieren?

Später erinnern

Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.

Hoppla! Benachrichtigungen sind deaktiviert.