Technical Articles: Reagent Chemistry, Synthesis & Bioscience Guides

TG 100801 Handling & Usage Guidelines for Research Labs

TG 100801 is a research-grade small-molecule reagent (also catalogued as HY-10186) that requires careful reconstitution, storage, and handling procedures to maintain its integrity and ensure reproducible experimental outcomes.

Aladdin SKU
T647871
Cross-Reference ID
HY-10186 (MCE)
Compound Class
Small-molecule research reagent
Recommended Storage Solvent
DMSO (consult SDS for concentration limits)
Storage Condition
Store as directed on product label; avoid repeated freeze-thaw cycles
Application Area
In vitro biochemical and cell-based assays

Reconstitution and Solution Preparation

TG 100801 (SKU: T647871) is typically supplied as a solid powder. Before use, allow the vial to equilibrate to room temperature for at least 10 minutes to minimise condensation. Weigh the required amount under inert conditions if the compound is moisture-sensitive.

Dissolve TG 100801 in an appropriate volume of anhydrous DMSO to prepare a concentrated stock solution. Vortex gently and, if necessary, warm briefly (37 °C water bath, ≤5 min) to aid dissolution. Do not use aqueous buffers as the primary solvent without first confirming solubility, as precipitation can occur and compromise assay results.

For cell-based assays, dilute the DMSO stock into culture medium immediately before use, ensuring the final DMSO concentration does not exceed 0.1% (v/v) to avoid vehicle-related cytotoxicity. Always include a solvent-only vehicle control in parallel.

Note: Specific solubility values and recommended stock concentrations are not confirmed in the current source material; consult the product datasheet or SDS, and flag for verification before publication.

Storage and Stability

Proper storage of TG 100801 is essential to preserve biological activity over time. Follow the storage conditions printed on the product label. As a general guideline for small-molecule research reagents of this class:

  • Powder form: Store desiccated at −20 °C or −80 °C, protected from light and moisture.
  • DMSO stock solutions: Aliquot into single-use volumes to avoid repeated freeze-thaw cycles, which can degrade compound integrity. Store aliquots at −20 °C.
  • Working solutions: Prepare fresh on the day of use; do not store diluted aqueous solutions long-term.

Always record the date of reconstitution on each aliquot tube. Discard any aliquots showing visible precipitation, colour change, or cloudiness.

Review flag: Confirmed shelf-life data and specific stability studies for TG 100801 are not available in the supplied source material; verify with the product datasheet before publication.

Safety and Handling Precautions

Handle TG 100801 in accordance with good laboratory practice (GLP) and your institution's chemical safety regulations. Always consult the Safety Data Sheet (SDS) before use.

  • Wear appropriate personal protective equipment (PPE): laboratory coat, chemical-splash goggles, and nitrile gloves.
  • Work in a well-ventilated area or fume hood when handling powders or concentrated DMSO solutions to avoid inhalation.
  • DMSO readily penetrates skin and can carry dissolved compounds transdermally; exercise particular caution when handling DMSO solutions.
  • Dispose of chemical waste in accordance with local environmental regulations; do not pour DMSO solutions down the drain.

TG 100801 is supplied for research use only and is not intended for diagnostic, therapeutic, or human/animal administration purposes.

Quality Control and Verification

To ensure experimental reproducibility, implement the following quality-control practices when working with TG 100801:

  1. Lot-specific documentation: Record the lot number, receipt date, and storage location for each batch received. Compare the certificate of analysis (CoA) values against specification limits.
  2. Purity verification: Review HPLC purity and mass-spectrometry data provided on the CoA. If purity is below 98%, consider additional characterisation steps before critical experiments.
  3. Positive and negative controls: Include well-validated positive controls in every assay run to confirm compound activity and assay performance.
  4. Dose-response confirmation: Before committing to large-scale experiments, conduct a dose-response experiment to confirm the expected pharmacological behaviour of TG 100801 in your specific assay system.

Review flag: Exact purity specification and CoA parameters for SKU T647871 are not confirmed in the source material; update with datasheet values prior to publication.

Frequently asked questions

What solvent should I use to dissolve TG 100801?

TG 100801 is most commonly dissolved in anhydrous DMSO to prepare a concentrated stock solution. The DMSO stock should then be diluted into the appropriate aqueous buffer or cell culture medium immediately before use, keeping the final DMSO concentration at or below 0.1% (v/v). Always confirm solubility data on the product datasheet.

How should I store TG 100801 to maintain its stability?

Store the solid powder desiccated at −20 °C or −80 °C, protected from light and moisture, as indicated on the product label. For DMSO stock solutions, aliquot into single-use volumes and store at −20 °C to avoid repeated freeze-thaw cycles. Always consult the product datasheet for lot-specific stability information.

Is TG 100801 (T647871) suitable for in vivo studies?

TG 100801 is supplied by Aladdin Scientific for research use only and is not approved for therapeutic or clinical use. If you intend to conduct in vivo studies, consult the product datasheet for formulation guidance and ensure compliance with your institution's animal ethics committee requirements.

Where can I find the Certificate of Analysis (CoA) for TG 100801?

The Certificate of Analysis for TG 100801 (SKU: T647871) can be obtained from the Aladdin Scientific website by entering the lot number, or by contacting Aladdin customer service directly. The CoA includes purity data, analytical test results, and storage recommendations specific to your batch.

References

  1. MedChemExpress (MCE). TG 100801 product information, HY-10186. MedChemExpress LLC.
  2. Aladdin Scientific. TG 100801, SKU T647871, product datasheet. Aladdin Scientific Corp.

Products are supplied for research and development use only. Not for use in humans, animals, diagnosis, or therapy.

Categories: Technical Articles: Reagent Chemistry, Synthesis & Bioscience Guides

Da — when not otherwise indicated, molecular weight units are daltons.   Mw — weight-average molecular weight.   Mn — number-average molecular weight.

Products are supplied for research and development use only. Not for use in humans, animals, diagnosis, or therapy.

Cite this article

Aladdin Scientific. "TG 100801 Handling & Usage Guidelines for Research Labs" Aladdin Knowledge Base, updated 15.10.2026. https://www.aladdinsci.com/eu_de/faqs/tg-100801-handling-usage-guidelines-en.html
Was this article helpful? Yes No 0 out 2 found this helpful

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.