Determine the necessary mass, volume, or concentration for preparing a solution.
Methylene blue, also known as methylthioninium chloride, basic blue 9, etc., has the molecular formula C₁₆H₂₄ClN₃O₃S (hydrated form), a molecular weight of 373.9, and a CAS number of 7220-79-3.
Methylene blue staining solution is commonly used for staining silk, paper, bacteria, cells, etc. Because it is easily oxidized, staining results are not suitable for long-term storage.
Procedure (for reference only):
1. Sample Processing
① Paraffin sections
Deparaffinize in xylene for 5–10 min.
Replace with fresh xylene and deparaffinize again for 5–10 min.
Immerse in anhydrous ethanol for 5 min.
Rinse in distilled water for 2 min.
② Frozen sections
Rinse in distilled water for 2 min.
③ Cultured cells
Fix with 4% paraformaldehyde for at least 10 min.
Wash with distilled water for 2 min.
Replace with fresh distilled water and wash again for 2 min.
2. Methylene Blue Staining
Stain with Methylene Blue Staining Solution (0.2%) for 3–10 min (the time can be adjusted according to the staining results and requirements).
Wash thoroughly with distilled water or tap water, then observe and photograph.
Staining Results:
Tissues or cells: blue
Precautions:
1.When using this reagent for the first time, it is recommended to perform a preliminary experiment with 1–2 samples.
2.For your safety and health, please wear a lab coat and disposable gloves during operation.
3.This product is for research use only and must not be used for any other purposes.
| Empfindlichkeit | Light-sensitive |
|---|---|
| Schmelzpunkt (°C) | 235°C |
H315:Causes skin irritation
H319:Causes serious eye irritation
H335:May cause respiratory irritation
H373:May causes damage to organs through prolonged or repeated exposure
H302:Harmful if swallowed
P261:Avoid breathing dust/fume/gas/mist/vapors/spray.
P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
P280:Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352:IF ON SKIN: wash with plenty of water.
P321:Specific treatment (see ... on this label).
P405:Store locked up.
P501:Dispose of contents/container to an approved waste disposal plant.
P264:Wash hands [and …] thoroughly after handling.
P260:Do not breathe dust/fume/gas/mist/vapors/spray.
P271:Use only outdoors or in a well-ventilated area.
P270:Do not eat, drink or smoke when using this product.
P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233:Store in a well-ventilated place. Keep container tightly closed.
P362+P364:Take off contaminated clothing and wash it before reuse.
P330:Rinse mouth.
P264+P265:Wash hands [and …] thoroughly after handling. Do not touch eyes.
P301+P317:IF SWALLOWED: Get medical help.
P337+P317:If eye irritation persists: Get medical help.
P332+P317:If skin irritation occurs: Get medical help.
P319:Get medical help if you feel unwell.
The following are general, literature-based protocols for common uses of a 0.2% methylene blue solution. Optimize for your specimens and instrumentation.
Simple cell stain (wet mount):
Bacterial simple stain (smear):
Plant epidermis (onion skin) stain:
Agarose gel post-stain for DNA (visible light):
General tips:
This section discusses general, literature-based properties of methylene blue relevant to lab staining; it does not describe therapeutic or clinical uses.
Binding/interactions (general):
Redox/photosensitization:
Cell permeability:
These roles underpin its utility in teaching labs and routine microscopy, where quick, visible staining is needed without fluorescence instrumentation.
This product is not a buffering reagent. However, it is commonly used in conjunction with standard biological buffers.
Compatible buffers (general practice):
pH considerations:
Item-specific buffer composition or recommended pH ranges are Not specified for this item; refer to CoA/Spec Sheet.
Methylene blue staining solution is water-based and can be a safer, non-UV alternative for certain visualization tasks.
Environmental/health profile (general):
Alternatives and trade-offs (general comparison):
| Application | Greener or alternative option | Pros | Cons | |---|---|---|---| | DNA gel staining | Methylene blue (this product) | No UV needed; aqueous; readily disposable per local rules | Lower sensitivity; longer staining/destaining | | DNA gel staining | SYBR Safe, GelRed (fluorescent) | Higher sensitivity; visible-blue transilluminators | Cost; still specialized disposal needed | | General cell staining | Toluidine blue, Azure B | Similar handling; aqueous | Different color tone; metachromasia may complicate interpretation | | Gram staining counterstain | Safranin (aqueous/alcoholic) | Standardized protocols | Requires multiple reagents, sometimes alcohol handling |
Note: Waste disposal requirements vary. Always follow institutional and local regulations.
This product is supplied for research use only and is not intended for clinical or therapeutic applications.
Formulation/excipient context (general, non-clinical):
Pharmacopeial status and specification limits for this specific SKU: Not specified for this item; refer to CoA/Spec Sheet.
Users in regulated environments should qualify the reagent under their internal procedures and consult applicable standards before use in GMP settings.
Item-specific properties (0.2% staining solution):
Methylene blue dye (literature/general values for reference):
Boiling point, melting point, logP, pKa for this formulated solution: Not specified for this item; refer to CoA/Spec Sheet.
Practical note: The apparent color intensity of the 0.2% solution depends on path length and container geometry; strong absorbance may saturate spectrophotometers at standard 1 cm paths without dilution.
Item grade: BioReagent (per Product Data).
What BioReagent means for this product:
Stabilizers/preservatives:
UV/visible absorbance background:
Suitability: For research use only (per Product Data). Not for drug, diagnostic, or household use.
This product is primarily used for biological staining, not for synthetic reactions. Key laboratory applications (general/literature-based):
Simple biological stains:
Counterstaining:
Nucleic acid visualization (visible light):
Redox indicator/photosensitizer (chemistry labs, general):
Practical tips:
Not typically applicable to this staining solution. For completeness, general literature notes on the dye’s behavior are provided for researchers considering non-standard uses:
Photoredox catalysis (literature/general):
Redox indicator (literature/general):
For staining workflows, see Application Protocols for practical, relevant conditions.
GHS classification, signal word, hazard statements, and pictograms for this specific item: Not specified for this item; refer to the product SDS for authoritative information.
General laboratory precautions (good practice):
Incompatibilities/considerations (general):
First-aid overview (general):
Always consult the SDS for this specific SKU for complete hazard, exposure limits, and emergency procedures.
This product is an aqueous 0.2% staining solution and is typically used as supplied.
Polarity/miscibility:
When to use as-is vs alternatives:
Comparison (general):
Note: Item-specific solvent compatibility claims and pH tolerance are Not specified for this item; refer to CoA/Spec Sheet.
Item-specific storage: Store at room temperature (per Product Data). Shipped at ambient temperature (Normal).
Light sensitivity (general): Protect from prolonged exposure to strong light. Store in a tightly closed, light-protective container to maintain color strength.
Stability/shelf life: Not specified for this item; refer to CoA/Spec Sheet.
Reconstitution: Not applicable. This is a ready-to-use 0.2% solution. If concentration adjustments are needed, dilute with deionized water or appropriate buffer (e.g., PBS) using clean, dye-free containers.
Handling notes:
Always refer to the product label and CoA/SDS for item-specific guidance.
This product is a ready-to-use aqueous dye formulation: Methylene Blue Staining Solution (0.2%). It is intended for laboratory staining and visualization of biological specimens.
Item-specific identifiers (this catalog lot):
About the active dye (methylene blue, literature/general):
Notes: The above structural details describe the active dye component in general; exact identity/hydration state and concentration of excipients in this 0.2% solution should be confirmed from the item’s CoA/Spec Sheet.
This product is a prepared biological staining solution and is not typically employed as a synthetic building block.
For synthetic applications, source neat dye of defined grade and prepare solutions under conditions tailored to the intended reaction.
Not an antibody or targeted affinity reagent. Methylene blue is a general cationic dye that non-specifically associates with negatively charged cellular components (general/literature). No clone, isotype, antigen specificity, or species reactivity applies to this product.
Unser Leitfaden zur Qualitätsauswahl behandelt Reinheit, Stabilisatorstatus und Anwendungseignung für alle Varianten in unserem Katalog.
BioReagent Qualitätsleitfaden ansehen → Biological Stain Qualitätsleitfaden ansehen →