Fischor Mounting Medium - BioReagent,for microscopy,Suitable for Immunofluorescence(IF),Suitable for Immunohistochemistry(IHC)

Cat. No.: F1508973

CALIDAD & PUREZA Suitable for Immunofluorescence(IF), BioReagent, for Microscopy, Suitable for Immunohistochemistry(IHC)

Storage

Store at 2-8°C

Shipped In

Wet ice

Application

Cell Staining, IF/ICC, IHC

Descripción general

Product Introduction

A section is sandwiched between a slide and a coverslip, with a mounting medium applied in between to seal it off from contact with the outside air. This process is called mounting. On the one hand, it preserves the stained slides; on the other hand, the mounting medium with a suitable refractive index allows the tissue cells in the sample to be clearly visualized.

Fischor Mounting Medium is mainly composed of glycerol, gelatin, and a small amount of phenol. It can be used for mounting various routine sections and smears. This reagent is intended for research purposes only and not for clinical diagnosis or other applications.

Materials to Be Prepared by Users

Tissue samples, slides, coverslips, microscope

Operating Procedures (For Reference Only)

1. Cell Samples

① After staining, aspirate all liquid completely.

② Add 1-2 drops of Fischor Mounting Medium onto the slide, then place the coverslip with adherent cells onto the medium, ensuring the cells come into contact with the mounting medium and minimizing bubble formation.

③ Observe under a microscope.

2. Tissue Sections

① After staining, aspirate the staining solution.

② Add 1-2 drops of Fischor Mounting Medium onto the tissue section, then place a coverslip over it, ensuring the section is in contact with the mounting medium and minimizing bubble formation.

③ Observe the tissue section under a microscope.

3. Other Samples

Follow the procedures for cell samples or tissue sections.

Precautions

1. Mounted samples should be stored away from light.

2. The mounting medium appears solid at low temperatures. Before use, incubate it in a water bath at 37-50 °C until it is completely dissolved.

3. For your safety and health, wear a lab coat and disposable gloves during operation.

4. Please use the reagent as soon as possible after opening to avoid affecting subsequent experimental results.

Especificaciones

Especificaciones y pureza

BioReagent,for microscopy,Suitable for Immunofluorescence(IF),Suitable for Immunohistochemistry(IHC)

Condiciones de almacenamiento de almacenamiento

Store at 2-8°C

Enviado en

Wet ice

Este producto requiere envío en cadena de frío. Los servicios terrestres y otros servicios económicos no están disponibles.

Grado

BioReagent, for Microscopy, Suitable for Immunofluorescence(IF), Suitable for Immunohistochemistry(IHC)

Product Line

Productos biológicos

Preguntas frecuentes

What does Suitable for Immunofluorescence(IF) mean?

Suitable for Immunofluorescence(IF) indicates the product has been validated for use in immunoassays such as ELISA, IF, IHC and flow cytometry. Validation may include positive/negative control samples, signal-to-noise testing, and protocol-specific QC. Lot-specific test data is published on the Certificate of Analysis where available.

What does BioReagent mean?

BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.

How should this product be stored?

Store at 2–8 °C. Refrigerated storage is required to maintain the specified shelf life.

How is this product shipped?

This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.

What documentation is provided?

Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.