Determine the necessary mass, volume, or concentration for preparing a solution.
Methylene blue, also known as methylthioninium chloride, basic blue 9, etc., has the molecular formula C₁₆H₂₄ClN₃O₃S (hydrated form), a molecular weight of 373.9, and a CAS number of 7220-79-3.
Methylene blue staining solution is commonly used for staining silk, paper, bacteria, cells, etc. Because it is easily oxidized, staining results are not suitable for long-term storage.
Procedure (for reference only):
1. Sample Processing
① Paraffin sections
Deparaffinize in xylene for 5–10 min.
Replace with fresh xylene and deparaffinize again for 5–10 min.
Immerse in anhydrous ethanol for 5 min.
Rinse in distilled water for 2 min.
② Frozen sections
Rinse in distilled water for 2 min.
③ Cultured cells
Fix with 4% paraformaldehyde for at least 10 min.
Wash with distilled water for 2 min.
Replace with fresh distilled water and wash again for 2 min.
2. Methylene Blue Staining
Stain with Methylene Blue Staining Solution (0.1%) for 3–10 min (the time can be adjusted according to the staining results and requirements).
Wash thoroughly with distilled water or tap water, then observe and photograph.
Staining Results:
Tissues or cells: blue
Precautions:
1.When using this reagent for the first time, it is recommended to perform a preliminary experiment with 1–2 samples.
2.For your safety and health, please wear a lab coat and disposable gloves during operation.
3.This product is for research use only and must not be used for any other purposes.
| Schmelzpunkt (°C) | 235°C |
|---|
H315:Causes skin irritation
H319:Causes serious eye irritation
H335:May cause respiratory irritation
H373:May causes damage to organs through prolonged or repeated exposure
H302:Harmful if swallowed
P261:Avoid breathing dust/fume/gas/mist/vapors/spray.
P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
P280:Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352:IF ON SKIN: wash with plenty of water.
P321:Specific treatment (see ... on this label).
P405:Store locked up.
P501:Dispose of contents/container to an approved waste disposal plant.
P264:Wash hands [and …] thoroughly after handling.
P260:Do not breathe dust/fume/gas/mist/vapors/spray.
P271:Use only outdoors or in a well-ventilated area.
P270:Do not eat, drink or smoke when using this product.
P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233:Store in a well-ventilated place. Keep container tightly closed.
P362+P364:Take off contaminated clothing and wash it before reuse.
P330:Rinse mouth.
P264+P265:Wash hands [and …] thoroughly after handling. Do not touch eyes.
P301+P317:IF SWALLOWED: Get medical help.
P337+P317:If eye irritation persists: Get medical help.
P332+P317:If skin irritation occurs: Get medical help.
P319:Get medical help if you feel unwell.
The following protocols are provided as general literature guidance for 0.1% aqueous methylene blue solutions. They are not validated specifically for this SKU; optimize for your samples.
Simple bacterial smear stain (literature)
Wet-mount plant tissue contrast (literature)
Gel/biopolymer visualization (screening; literature)
Notes
Binding interactions (literature)
Redox chemistry in biological contexts (literature)
Photobiology (literature)
Cellular staining behavior (literature)
Note: These biological roles are general literature descriptions of methylene blue and are not specific performance claims for this item. This product is for research use only (not for use in humans or animals for therapeutic/diagnostic purposes).
This product is a staining solution rather than a buffering agent, so it is not typically used to establish or maintain pH.
For pH-controlled applications or electrophoresis buffers, select a dedicated buffer system (e.g., phosphate, Tris, HEPES) appropriate to your target pH and ionic strength.
Environmental and safety profile (general)
Potential greener or alternative choices (literature/guidance)
Comparison snapshot (general, literature)
Practical green tips
No pharmaceutical or clinical uses are claimed or supported for this catalog item. It is intended for research use only.
General context (literature/industry)
Formulation considerations for research settings
Always restrict use of this product to non-clinical laboratory research.
Item-specific properties (this catalog item)
Typical properties of methylene blue solutions (literature/general)
Computed/concentration considerations for a 0.1% w/v dye solution (general calculation)
Solubility (literature)
Stability notes (literature)
All quantitative values above are literature/general guidance and not item-specific specifications.
Supplied grade (item-specific): BioReagent.
What BioReagent typically implies (general guidance)
Relevance to methylene blue staining solutions
Stabilizers and additives
Batch-to-batch assurance
Regulatory/trace data
Primary application domain (this item)
Staining mechanisms (literature)
Ancillary laboratory applications (literature)
Practical tips (general)
As a staining reagent, this item is normally used at ambient conditions. For users leveraging methylene blue’s chemical reactivity, the following are general literature conditions (not item-specific):
Photoredox transformations (literature)
Redox indicator use (literature)
Staining operations (general practice)
Note: These are general guidelines. Optimize case-by-case and confirm compatibility with your substrates and matrices. This product does not specify validated reaction conditions.
GHS/SDS information
General hazards (literature/typical for methylene blue solutions)
PPE and handling
Incompatibilities and reactivity (literature)
First-aid overview (general guidance; defer to SDS)
Always consult the SDS for comprehensive hazard, exposure controls, and disposal guidance.
This product is supplied as a ready-to-use aqueous staining solution; independent solvent selection is generally not required.
Medium characteristics (general)
When solvent considerations may matter
Alternatives
Comparison (general guidance)
Storage (item-specific)
General handling and stability (literature/guidance)
Reconstitution
Freeze–thaw
Always refer to the product label and CoA/Spec Sheet for lot-specific guidance and to the SDS for safe handling and disposal.
This product is a ready-to-use aqueous staining solution containing 0.1% methylene blue for general biological staining in research workflows.
Item-specific identifiers (this catalog item)
Active dye identity (literature, for background)
2D structure (described): Two benzene rings fused via a sulfur- and nitrogen-bridged central thiazine ring (phenothiazine core). Para-dimethylamino substituent on one ring and an amino substituent on the other; the ring nitrogen is quaternized (cationic), balanced by a chloride anion in the common salt form.
Note: The exact counterion, impurities, and any stabilizers for this product are not specified; consult the CoA for definitive identity data.
While primarily supplied as a biological stain, methylene blue has documented utility in chemical synthesis and analysis (literature):
Photoredox catalysis
Redox mediator/indicator
Materials and polymer chemistry
Practical note: This SKU is an aqueous 0.1% solution. For exacting synthetic applications, users may prefer weighing solid methylene blue to define molarity and select solvent, or they may volumetrically dispense and further dilute this solution, accounting for its initial concentration (see Physical Properties for a theoretical conversion). Verify impurities, counterions, and additives via CoA before incorporating into sensitive reaction systems.
Not applicable. This product is a chemical staining solution and not an antibody or affinity reagent. No antigen/epitope specificity, clone, isotype, or species reactivity data are associated with this item.
Unser Leitfaden zur Qualitätsauswahl behandelt Reinheit, Stabilisatorstatus und Anwendungseignung für alle Varianten in unserem Katalog.
BioReagent Qualitätsleitfaden ansehen → Biological Stain Qualitätsleitfaden ansehen →