Determine the necessary mass, volume, or concentration for preparing a solution.
Methylene blue, also known as methylthioninium chloride, basic blue 9, etc., has the molecular formula C₁₆H₂₄ClN₃O₃S (hydrated form), a molecular weight of 373.9, and a CAS number of 7220-79-3.
Methylene blue staining solution is commonly used for staining silk, paper, bacteria, cells, etc. Because it is easily oxidized, staining results are not suitable for long-term storage.
Procedure (for reference only):
1. Sample Processing
① Paraffin sections
Deparaffinize in xylene for 5–10 min.
Replace with fresh xylene and deparaffinize again for 5–10 min.
Immerse in anhydrous ethanol for 5 min.
Rinse in distilled water for 2 min.
② Frozen sections
Rinse in distilled water for 2 min.
③ Cultured cells
Fix with 4% paraformaldehyde for at least 10 min.
Wash with distilled water for 2 min.
Replace with fresh distilled water and wash again for 2 min.
2. Methylene Blue Staining
Stain with Methylene Blue Staining Solution (1%) for 3–10 min (the time can be adjusted according to the staining results and requirements).
Wash thoroughly with distilled water or tap water, then observe and photograph.
Staining Results:
Tissues or cells: blue
Precautions:
1.When using this reagent for the first time, it is recommended to perform a preliminary experiment with 1–2 samples.
2.For your safety and health, please wear a lab coat and disposable gloves during operation.
3.This product is for research use only and must not be used for any other purposes.
| Schmelzpunkt (°C) | 235°C |
|---|
H315:Causes skin irritation
H319:Causes serious eye irritation
H335:May cause respiratory irritation
H373:May causes damage to organs through prolonged or repeated exposure
H302:Harmful if swallowed
P261:Avoid breathing dust/fume/gas/mist/vapors/spray.
P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
P280:Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352:IF ON SKIN: wash with plenty of water.
P321:Specific treatment (see ... on this label).
P405:Store locked up.
P501:Dispose of contents/container to an approved waste disposal plant.
P264:Wash hands [and …] thoroughly after handling.
P260:Do not breathe dust/fume/gas/mist/vapors/spray.
P271:Use only outdoors or in a well-ventilated area.
P270:Do not eat, drink or smoke when using this product.
P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233:Store in a well-ventilated place. Keep container tightly closed.
P362+P364:Take off contaminated clothing and wash it before reuse.
P330:Rinse mouth.
P264+P265:Wash hands [and …] thoroughly after handling. Do not touch eyes.
P301+P317:IF SWALLOWED: Get medical help.
P337+P317:If eye irritation persists: Get medical help.
P332+P317:If skin irritation occurs: Get medical help.
P319:Get medical help if you feel unwell.
The following are general, literature-based protocols for using a 1% methylene blue staining solution. Optimize conditions for your specimens and instrumentation.
Notes:
This product is intended for laboratory staining and not for biological administration. The following describes the dye’s interactions in research contexts (literature/general), not clinical use.
Note: No medical or clinical claims are made for this product. For all biological uses, optimize staining conditions empirically and include appropriate positive/negative controls.
While not a buffering agent, the staining performance of methylene blue is influenced by the composition of the surrounding medium. Practical guidance (literature/general):
Example working sequences (general):
Exact pH and buffer composition for this catalog item are Not specified for this item; refer to CoA/Spec Sheet.
From a green chemistry perspective, a pre-made 1% methylene blue staining solution offers several advantages and tradeoffs.
Potential advantages:
Considerations and tradeoffs:
Comparison (general literature):
Greener practice tips:
This product is supplied as a laboratory BioReagent staining solution for research use only. It is not manufactured to GMP standards and is not intended for human or veterinary use.
Contextual information (literature/general):
Formulation/excipient role for this specific item:
Regulatory note:
Item-specific physico-chemical specifications for the supplied 1% staining solution are not provided.
Relevant literature properties for the dye component (methylene blue) — for context only:
Practical notes:
What BioReagent typically signifies (general guidance):
What is item-specific:
What is not specified and should be verified by users if critical:
Practical QA recommendations:
Primary use of this product: laboratory staining. The 1% methylene blue solution is broadly useful for rapid visualization in biological and materials contexts.
Common staining applications (general literature):
Ancillary chemistry applications (literature):
Practical tips:
No reaction conditions are specified for this catalog item, which is supplied as a staining solution. The following is general literature guidance for methylene blue used as a reagent/catalyst in research chemistry.
Photoredox catalysis (literature examples):
Redox indicator/titrations (literature):
Analytical adsorption studies (literature):
For any critical application, validate with small-scale trials, as the exact composition of this product is Not specified for this item; refer to CoA/Spec Sheet.
Hazard classification for this specific formulation is not provided.
General safety guidance (good laboratory practice; consult the SDS for authoritative information):
This product is supplied as a ready-to-use 1% staining solution; external solvent selection is generally not required for routine use.
General considerations when working with methylene blue solutions (literature and best practice):
When to choose alternatives:
Research use note: For research use only (per product data).
This product is a ready-to-use 1% staining solution of the phenothiazinium dye commonly known as methylene blue (methylthioninium chloride), formulated for laboratory staining applications.
General structural information (literature, for the dye component):
2D structure in words (literature): A central sulfur- and nitrogen-containing thiazine ring is fused to two benzene rings (phenothiazine). Para to the heteroatoms, dimethylamino groups donate electron density into the conjugated system, stabilizing the cationic resonance forms. The chloride counterion is not covalently bound and is solvated in aqueous media.
Although primarily provided here as a staining solution, methylene blue is a versatile reagent in synthetic and analytical chemistry (literature/general):
Practical notes if using this item in chemistry settings:
This product is not an antibody, probe, or affinity reagent with defined molecular target specificity. It is a general cationic dye that binds broadly to polyanionic substrates via electrostatic and aromatic interactions.
Application guidance:
Unser Leitfaden zur Qualitätsauswahl behandelt Reinheit, Stabilisatorstatus und Anwendungseignung für alle Varianten in unserem Katalog.
BioReagent Qualitätsleitfaden ansehen → Biological Stain Qualitätsleitfaden ansehen →