Determine the necessary mass, volume, or concentration for preparing a solution.
BioReagent,for microscopy,Biological Stain Biological Stain,BioReagent,for Microscopy for sensitive chromatographic and analytical workflows requiring minimal baseline interference.
Protected from light,Room temperature Ships Normal Check lot-specific COA for exact specifications.
SDS, COA, datasheet, and spec sheet available for download. Lot-specific COA accessible via lot number lookup.
Cited in 0 peer-reviewed publications across chromatography, organic synthesis, and cross-coupling reactions.
Cellulose is a macromolecular polysaccharide composed of glucose, serving as the primary component of plant cell walls. It is also the most widely distributed and abundant polysaccharide in nature, accounting for over 50% of the carbon content in the plant kingdom. Cotton fiber contains nearly 100% cellulose, making it the purest natural source of cellulose. In general wood, cellulose constitutes 40%–50%, along with 10%–30% hemicellulose and 20%–30% lignin. Cellulose often coexists with hemicellulose, pectin, and lignin. The manner and degree of their association significantly affect the texture of plant-based foods, while texture changes during plant maturation and post-harvest ripening are primarily caused by alterations in pectic substances. The human digestive tract lacks cellulase, making cellulose an important type of dietary fiber.
Plant Cellulose Staining Solution (Zinc Chloroiodide Method) is based on the colorimetric reaction of chlorine-zinc iodide. It stains cellulose violet-blue or blue, while lignin, cutin, and suberin appear orange-yellow. It is suitable for staining fresh tissue sections, as well as tissue sections fixed with ethanol or FAA fixative, or processed by freeze-drying. This product is intended for research use only and is not suitable for clinical diagnosis or other non-research purposes.
Materials to Be Prepared by User
Procedure (For Reference Only)
1. Place the tissue section on a glass slide and immediately immerse it in the Plant Cellulose Staining Solution (Chlorine-Zinc Iodide Method) for staining.
2. After staining for 5 minutes, the section can be observed under a microscope. Longer staining times result in deeper colors.
Staining Results
|
Notes
For tissue fixation, ethanol or FAA fixative is commonly used. Avoid using chromic acid fixatives.
If a microtome is unavailable, free-hand sectioning may be used, but thin and uniform tissue sections should be selected.
For your safety and health, please wear a lab coat and disposable gloves during operation.
Use the reagents as soon as possible after opening to avoid affecting subsequent experimental results.
Comprehensive hazard, handling, storage, and regulatory compliance document.
Download SDS →Lot-specific quality data. Enter your lot number to retrieve the exact COA.
Look up COA →Full quality attributes and acceptance criteria for this grade.
View spec sheet →Find and download the COA for your product by matching the lot number on the packaging.
| Lot Number | Certificate Type | Date | Item |
|---|---|---|---|
| Certificate of Analysis | Apr 13, 2026 | P1511470 |
| Sensitivity | Light-sensitive |
|---|
Our grade selection guide covers purity, stabilizer status, and application suitability for all variants in our catalog.
View BioReagent grade guide → View Biological Stain grade guide → View for Microscopy grade guide →