UltraBio™ Mycoplasma Elimination Spray

Cat. No.: M743357

Storage

Room temperature

Shipped In

Normal

Overview

Mycoplasma contaminating cells has a wide range of sources, such as culture environment, contaminated cells, human surface carrying, experimental reagents and experimental equipment, among which environmental pollution is the most common cause. When many people share an incubator, the same console and other equipment and are in the same experimental environment, even if they are very careful, the cells are easily contaminated by mycoplasma, so it is very important to kill mycoplasma regularly in the working area. Aladdin 's mycoplasma removal spray is a ready-to-use spray that can quickly, efficiently, and non-toxically remove and prevent mycoplasma contamination in the work area. This product is suitable for the removal and prevention of mycoplasma contamination in laboratory equipment and laboratory environment, such as test bench, biological safety cabinet, ultra-clean bench, carbon dioxide incubator, pipette, liquid nitrogen tank, door handle and so on. It is also suitable for broad-spectrum antibacterial disinfection.
Product advantage
1.Rapid and efficient : The main component of this product is a polypeptide surfactant, which kills mycoplasma by changing the permeability of the mycoplasma membrane, so the possibility of mycoplasma resistance is extremely low, and it takes only about 5-10 minutes to eradicate mycoplasma after spraying. 
2.Low cytotoxicity : This product cannot pass through the cell membrane of eukaryotic cells, so it will not change any characteristics of the cells. 
3.Convenient operation : The traditional methods of preventing and eliminating mycoplasma in cell culture environment include formaldehyde potassium permanganate fumigation disinfection and alcohol wiping method, which are complicated to operate, have a long action time, and may have certain toxic and side effects on human body and cells. This product is a ready-to-use disinfectant, which can be directly sprayed on the working area to quickly remove mycoplasma contamination. 
Direction for use
1.Spray the spray evenly on the surface of the experimental equipment to be cleaned or disinfected or the experimental environment ; 
2.wait for 5-10 minutes ; 
3.Wipe the surface of the experimental equipment and equipment that have been sprayed on the product with a clean dry paper towel ; 4.Ventilation can be used after 2-3 minutes.
Matters needing attention
1.Wear appropriate protective clothing and gloves when operating. 
2.If the product is in contact with the skin and eyes, it should be immediately rinsed with a large amount of water, do not delay, if necessary, should be timely medical treatment.

Specifications

Stability And Storage

Store sealed at room temperature, valid for 18 months.

Storage

Room temperature

Shipped In

Normal