BioReagent,Suitable for plant cell and tissue extracts BioReagent,Suitable for plant cell and tissue extracts for sensitive chromatographic and analytical workflows requiring minimal baseline interference.
Store at 2-8°C,Protected from light,Room temperature Ships Wet ice Check lot-specific COA for exact specifications.
SDS, COA, datasheet, and spec sheet available for download. Lot-specific COA accessible via lot number lookup.
Cited in 0 peer-reviewed publications across chromatography, organic synthesis, and cross-coupling reactions.
Glycolate Oxidase (GO) is an enzyme involved in the glycolate cycle. In the glycolate metabolic pathway, glycolate is converted to glyoxylate under the catalysis of glycolate oxidase. Photosynthesis and respiration are the two core processes of plant metabolism. Photosynthesis is the process of substance synthesis and energy storage, belonging to anabolism; it provides materials and energy for the survival of almost all organisms, including humans. Respiration is the process of substance decomposition and energy release, belonging to catabolism; it supplies energy for life activities. Determination of glycolate oxidase activity in samples is a basic method to analyze photosynthetic and respiratory metabolism in plants.
Glycolate Oxidase (GO) Extraction Reagent is mainly used for the extraction of glycolate oxidase from plant tissues or fruits.This reagent is for research use only and is not suitable for clinical diagnosis or other applications.
Materials Provided by User
Mortar or homogenizer, gauze or filter paper, centrifuge tubes or test tubes, centrifuge, pH meter
Protocol (For Reference Only)
1. Take fresh plant leaves, wash clean, blot dry with absorbent paper, and weigh 18 g. Add 18 mL of pre‑cooled GO Extraction Reagent, then homogenize or grind thoroughly in an ice bath. Filter through gauze or filter paper, and transfer the filtrate to a centrifuge tube or test tube.
2. Centrifuge at 1000×g for 15 min. Transfer the supernatant to a new centrifuge tube or test tube, adjust the pH to 5.4, then centrifuge at 4000×g for 15 min. Collect the supernatant.
3. Add Protein Precipitant at a ratio of supernatant: Protein Precipitant=10 mL: 1.15 g, mix continuously for 30 min, then centrifuge at 4000×g for 20 min. Collect the supernatant.
4. Add Protein Precipitant at a ratio of supernatant: Protein Precipitant=10 mL: 0.6 g, mix continuously for 30 min, then centrifuge at 4000×g for 20 min. Discard the supernatant; the pellet is the crude glycolate oxidase product.
Precautions
1. Experimental materials should be as fresh as possible. If not used immediately after collection, store at −20 to −80 ℃.
2. Please use the reagent as soon as possible after opening to avoid affecting subsequent experimental results.
3. For your safety and health, please wear a lab coat and disposable gloves during operation.
| G1509484 | Component | 2×500 mL | Storage |
| G1509484A | GO Extraction Reagent | 2×500 mL | 2-8℃. Store in the dark. |
| G1509484B | Protein Precipitant | 100 g | RT. Store in the dark. |
Comprehensive hazard, handling, storage, and regulatory compliance document.
Download SDS →Lot-specific quality data. Enter your lot number to retrieve the exact COA.
Look up COA →Full quality attributes and acceptance criteria for this grade.
View spec sheet →Find and download the COA for your product by matching the lot number on the packaging.
| Lot Number | Certificate Type | Date | Item |
|---|---|---|---|
 ZJ26F0535377 | Certificate of Analysis | May 13, 2026 | G1509484 |
| ZJ26F0434101 | Certificate of Analysis | Apr 10, 2026 | G1509484 |
Our grade selection guide covers purity, stabilizer status, and application suitability for all variants in our catalog.
View BioReagent grade guide → View Suitable for plant cell and tissue extracts grade guide →
