This compound belongs to the class of organic compounds known as long-chain fatty acids. These are fatty acids with an aliphatic tail that contains between 13 and 21 carbon atoms.
External Descriptors
Other Octadecanoids
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
No assay or immunoapplication protocols are specified for this small-molecule reagent. Typical laboratory uses include synthetic transformations (esterification, amidation, oxidation) and materials preparation (film casting, gel structuring). For synthetic procedures, see the Reaction Conditions tab; for formulation or materials work, optimize dissolution (warming in suitable organic solvents) and casting/annealing profiles based on your equipment.
Biological Roles
General biochemical context (literature; not product-specific)
ω‑Hydroxy fatty acids (including 18‑hydroxyoctadecanoic acid) are intermediates in fatty acid ω‑oxidation pathways mediated by cytochrome P450 enzymes (e.g., CYP4 family). They can be further oxidized to ω‑aldehydes and ω‑dicarboxylic acids by alcohol and aldehyde dehydrogenases.
Structural biomaterials: ω‑hydroxy C16–C18 acids are integral monomers of plant cutin and suberin polyesters, contributing to the hydrophobic barrier of leaves, fruit skins, and periderm.
Surface activity: dual hydrophilic termini confer amphiphilicity that can influence micelle/aggregate formation in appropriate solvent environments.
Metabolic fate: in animal systems, ω‑hydroxylation provides a route to increase polarity and enable β‑oxidation after conversion to diacids; these products may appear in peroxisomal metabolism.
Experimental implications
Useful as a standard or probe for lipid oxidation studies and for reconstructing plant polyester networks in vitro.
When modeling biological barriers or membranes, the saturation and chain length influence packing density and permeability.
Note: No medical or clinical claims are made. Use is restricted to research and laboratory investigations.
Buffer Applications
This compound is a hydrophobic long-chain hydroxy fatty acid and is not used as a buffering agent. It lacks a suitable conjugate acid/base pair within physiological pH for practical buffer capacity. For aqueous work, dissolve using organic cosolvents or emulsifiers and employ a separate buffer system (e.g., phosphate, Tris) appropriate to your assay.
Green Alternatives
Context: This product is a substrate/building block rather than a process solvent. Green considerations revolve around sourcing and transformation conditions rather than “replacing” the compound itself.
Greener sourcing (general)
Bio-based feedstocks: ω‑hydroxy C18 acids can be accessed from renewable lipids via selective ω‑oxidation (biocatalytic CYP450 systems) or chemo‑catalytic oxidation of natural fatty alcohols/acids, lowering fossil carbon intensity.
Comparison to petrochemical α,ω‑diols/diacids: Using a single ω‑hydroxy fatty acid may reduce step count for amphiphile or polyester precursors.
Greener reaction conditions (literature)
Esterifications: employ catalytic organic acids (p‑TsOH, citric acid) in green solvents (2‑MeTHF, CPME, or ethanol) with azeotropic water removal rather than stoichiometric chlorinating agents.
Oxidations of the ω‑OH: TEMPO/NaOCl in biphasic water/ethyl acetate or MeCN with controlled pH is preferable to chromium(VI) or Dess–Martin on EHS grounds.
Couplings: EDC·HCl in aqueous ethanol or MeCN/water systems can reduce reliance on DCM/DMF; minimize excess carbodiimide and employ recyclable catalysts when possible.
Trade-offs
Higher-melting waxy products may need heating to dissolve in greener, less aggressive solvents, raising energy use.
Chlorinated solvents offer ease of processing but pose higher environmental and safety burdens; consider 2‑MeTHF/CPME/EtOAc when feasible.
2‑MeTHF/CPME/EtOAc: good solubility when warm, renewable options available, improved safety profile.
Pharmaceutical Uses
Item-specific regulatory/excipient status: Not specified for this item; refer to CoA/Spec Sheet.
General formulation context (non-clinical; for research/manufacturing discussions only)
Long-chain fatty and hydroxy fatty acids can function as structuring agents, emulsifier components, and hydrophobic excipients in semisolids, suppositories, and lipid-based delivery systems. The presence of a terminal –OH may enhance hydrogen-bonding networks and gel strength in nonpolar media (analogous to 12‑hydroxystearic acid).
Potential roles in R&D: rheology modifier in ointment bases, component of self-assembled nanostructures, hydrophobic counterion/ion-pairing partner for basic APIs during process development.
Compatibility: generally compatible with hydrocarbons, vegetable oils, waxes, and many nonionic surfactants; verify API interactions and residual solvent limits.
Compliance note: No pharmacopeial monograph or excipient designation is stated for this item. All uses are for research only; assess regulatory suitability independently for any GMP context.
Physical Properties
Item-specific specs
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Literature/general properties (for context; not item-specific specs)
Physical state: typically a waxy solid at ambient temperature, consistent with long-chain saturated hydroxy acids.
Molecular weight: ~300.48 g/mol (from formula C18H36O3; literature).
Acid dissociation: pKa for long-chain saturated fatty acids is typically ~4.7–5.0 (literature; specific value for the ω-hydroxy analogue expected in the same range).
Solubility: very low in water; soluble in common organic solvents (e.g., ethanol, methanol, isopropanol, acetone, chloroform, dichloromethane, ethyl acetate); enhanced solubility on warming; dissolves well in DMSO and DMF (literature/general behavior of C18 hydroxy acids).
Partitioning: high hydrophobicity (high logP) expected due to C18 chain; amphiphilic due to terminal –OH/–CO2H (literature inference for long-chain fatty acids).
Melting behavior: long-chain saturated fatty/hydroxy acids often melt well above room temperature; exact melting point for 18‑hydroxyoctadecanoic acid should be taken from primary literature or the CoA.
Refractive index/density: not typically reported for solids of this class; consult CoA if needed.
Notes
Where a specific numeric value is required for method validation or QC, use the item’s CoA/Specification Sheet.
Quality & Grades
Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
Practical guidance
Without a declared grade, consult the CoA for purity (e.g., GC/HPLC area %), residual solvents, and identification tests.
For applications sensitive to trace polar impurities (e.g., polymerizations, surface self-assembly), consider additional purification (recrystallization from ethanol/acetone or short-path distillation under high vacuum) as needed.
If low UV background is required (chromatographic uses), verify UV cutoff/absorbance on the CoA; not specified here.
Stabilizers: None stated for this item. Long-chain saturated hydroxy acids are generally stable and do not require inhibitors; confirm on the CoA.
What common grades would imply (general, for reference)
“Reagent/AR grade”: meets analytical reagent benchmarks for typical inorganic/organic impurities.
“≥98%” or “≥99%”: indicates organic purity by a specified method (GC, HPLC, or NMR). Always confirm the method and basis on the CoA.
“Biochemical grade”: tighter limits on bioburden/endotoxin; not specified for this item.
Reaction & Applications
Building-block roles (general, literature)
Bifunctional handle: terminal –CO2H and –CH2OH enable orthogonal derivatizations. Useful for amphiphilic materials, surface modifiers, and lipid-mimetic conjugates.
Polymer chemistry: polyester formation via self‑condensation (with catalysts) or with diols/diacids to make segmented polyesters and poly(ester-ethers). The ω‑OH allows chain extension/crosslinking.
Surfactant/rheology modifier: analogous to 12‑hydroxystearic acid, ω‑hydroxy variants can structure nonpolar media via H‑bonded networks; used in gel-like formulations and lubricants (research scale).
Representative transformations (general guidance)
Esterification: Fischer conditions (ROH, catalytic acid, Dean–Stark, 80–120 °C) or DCC/DMAP in DCM/DMF at 0–25 °C; isolate waxy esters by precipitation.
Amidation: EDC·HCl/HOBt or HATU/DIPEA in DMF/DCM, 0–25 °C; convert to amides for coupling to dyes, polymers, or supports.
Activation: form acyl chloride with SOCl2 (0–25 °C, catalytic DMF) for rapid acylations; or prepare NHS esters for bioconjugation-like workflows (research only).
Selective protection: protect the alcohol as silyl ether (TBDMS-Cl/imidazole) or carbonate; or temporarily protect the acid as a methyl/benzyl ester for selective alcohol chemistry.
Oxidation of ω‑OH: TEMPO/NaOCl (pH ~9–10, 0–5 °C to RT) to ω‑aldehyde/acid; Swern or Dess–Martin for aldehyde; Pinnick for aldehyde→acid conversion culminating in C18 α,ω‑diacid.
Conversion to leaving group: tosylate/mesylate formation at C18 for subsequent SN2 to introduce heteroatoms (iodide, azide → amine, etc.).
Materials/lipid science
Model for ω‑oxidation products; component in studies of cutin/suberin analogs and hydrophobic coatings. Long alkyl chain promotes monolayer and bilayer assembly on hydrophobic substrates.
Reaction Conditions
General guidance from literature for transformations of ω‑hydroxy fatty acids (optimize per your system):
Esterification of –CO2H
Fischer: alcohol (3–10 eq), p‑TsOH (1–5 mol%), toluene or 2‑MeTHF, Dean–Stark, 80–120 °C, 4–16 h; remove water azeotropically. Typical isolated yields: 70–95%.
EDC·HCl (1.2–1.5 eq) + HOBt or Oxyma (1.2–1.5 eq), DIPEA (2–3 eq), DMF or DCM, 0–25 °C, 2–18 h; 60–90%.
Protection of ω‑OH
TBDMS‑Cl (1.2 eq), imidazole (2 eq), DMF, RT, 2–6 h; or TMS‑Cl/pyridine for more labile protection.
Oxidation of ω‑OH
TEMPO (1–5 mol%), NaOCl (1.5–2.0 eq active), KBr (10 mol%), pH 9–10 (NaHCO3/Na2CO3), 0–5 °C to RT, 1–4 h → aldehyde; adjust conditions or add NaClO2 (Pinnick) for acid.
Dess–Martin periodinane (1.5 eq), DCM, 0–25 °C, 0.5–2 h → aldehyde in high yields (80–95%).
Acyl chloride formation
SOCl2 (3–5 eq), catalytic DMF, 0–25 °C, 1–3 h; remove volatiles under reduced pressure; use immediately.
Substitution from ω‑tosylate
TsCl (1.1–1.5 eq), pyridine or TEA, DCM, 0–25 °C; then NaN3 or NaI in DMF, 60–90 °C, 4–16 h to introduce azide/iodide.
Notes
Solubility often improves with gentle heating; maintain inert atmosphere for moisture‑sensitive intermediates (acyl chlorides, activated esters).
Reported yields are literature ranges for analogous long-chain substrates; verify at your scale.
Safety & Handling
Item-specific hazard information
Signal word: Not specified for this item; refer to SDS.
H-statements: Not specified for this item; refer to SDS.
GHS classification: Not specified for this item; refer to SDS.
Pictograms: Not specified for this item; refer to SDS.
General safety considerations for long-chain fatty/hydroxy acids (informational; defer to SDS)
Expected hazards: may cause skin and eye irritation; dust may cause respiratory irritation. Low volatility; inhalation risk mainly from particulates.
PPE: lab coat, safety glasses or goggles, and suitable gloves (e.g., nitrile). Use dust control and avoid aerosol generation.
Handling: minimize dust; weigh and transfer in a clean, dry environment. Avoid contact with strong oxidizers. For synthetic work, dry glassware and avoid contamination with strong bases/acids unless intended.
First aid overview: rinse eyes/skin with water for several minutes if contacted; remove contaminated clothing; if inhaled, move to fresh air; if ingested, rinse mouth. Seek medical attention as appropriate. Always follow your institutional SDS and protocols.
Fire safety: combustible organic solid; use CO2, dry chemical, or foam. Combustion may produce CO/CO2.
Environmental: prevent uncontrolled release to drains due to persistence of long-chain hydrophobes.
Storage incompatibilities
Separate from strong oxidizing agents; prolonged exposure to strong bases/acids can cause degradation.
Store tightly closed to limit moisture uptake and surface oxidation; follow “Room temperature” storage per product data.
Solvent Selection
This compound is a hydrophobic, weakly acidic amphiphile with terminal –OH and –CO2H groups.
Polarity/miscibility (literature/general)
Water: practically insoluble at neutral pH; limited dispersion above its melting range or with surfactants/cosolvents.
Alcohols: soluble in hot ethanol, methanol, isopropanol; often requires gentle heating to fully dissolve.
Polar aprotics: good solubility in DMSO, DMF, NMP, and decent in acetone/ethyl acetate/CH2Cl2/CHCl3.
Hydrocarbons: moderate solubility in hot toluene/hexanes; better as temperature increases.
Selection tips by application
Esterification/acylation: toluene, toluene–azeotrope (Dean–Stark), or CH2Cl2 with catalytic acids or DCC/DMAP.
Amidation/peptide-coupling: DMF, DCM, or acetonitrile using carbodiimide or uronium reagents; add base (DIPEA) as needed.
Oxidation of terminal –CH2OH: MeCN, EtOAc, or MeCN/H2O mixtures for TEMPO/bleach or Dess–Martin/CH2Cl2 for milder conditions.
Self-assembly/coatings: hot ethanol/isopropanol or chloroform for casting/spin-coating; slow cooling promotes crystallinity.
Comparison (general)
DMSO/DMF maximize solubility but are harder to remove; alcohols strike a balance for recrystallization; chlorinated solvents give rapid dissolution for workups but entail higher EHS burdens.
Storage & Reconstitution
Item-specific storage/shipping
Storage conditions: Room temperature (as provided).
Shipped in: Normal (as provided).
General storage guidance (supporting detail)
Keep tightly closed in a dry, inert atmosphere to limit moisture uptake and surface oxidation. Store away from strong oxidizers and strong acids/bases.
For long-term archival, a desiccator or dry cabinet is recommended. Avoid prolonged exposure to elevated temperatures that could promote autoxidation.
Reconstitution and handling
For stock solutions: dissolve in warm ethanol, isopropanol, acetone, ethyl acetate, chloroform, DCM, or DMSO. Gentle heating (40–60 °C) with stirring/sonication expedites dissolution. Prepare fresh solutions when possible to minimize peroxide formation in susceptible solvents.
Aqueous systems: use cosolvents (e.g., ethanol, DMSO) and/or emulsifiers (nonionic surfactants) since the compound is practically water-insoluble at neutral pH.
Filtration: warm solutions can be passed through PTFE or PVDF membranes (0.45–0.2 μm) to remove particulates before casting or analysis.
Stability
Long-chain saturated hydroxy acids are generally stable under ambient conditions. For sensitive applications, verify stability by NMR/LC before use.
Research use note: For research use only.
Structure & Identity
A long-chain ω-hydroxy fatty acid featuring both a terminal primary alcohol and a terminal carboxylic acid on an 18‑carbon saturated backbone; commonly known as 18‑hydroxystearic acid (ω‑hydroxyoctadecanoic acid).
InChI (literature, descriptive): depicts an octadecanoic acid with OH at C18 (ω-position)
Structural features (general description)
Functional groups: one carboxylic acid (C1), one primary alcohol (C18), saturated C18 alkyl chain.
2D structure in words: a linear C18 chain terminated on one end by –CO2H and on the other by –CH2OH; no rings, no unsaturation, no stereocenters.
Amphiphilic character: hydrophilic termini separated by a long hydrophobic methylene segment.
Synthetic Utility
Functional group leverage
Carboxylic acid (C1): acylation to esters/amides; activation to acyl chloride/anhydride/NHS ester; coupling to polymers or surfaces.
Primary alcohol (C18): protection (silyl/carbonate), oxidation to aldehyde/acid (leading to α,ω‑diacid), conversion to halide/tosylate for substitution chemistry.
Retrosynthetic value
Serves as a linchpin for constructing amphiphiles with spatially separated polar groups; allows access to linear α,ω‑functionalized C18 scaffolds from a single starting point.
Named/typical transformations (literature)
Steglich esterification (DCC/DMAP) to install labile esters at room temperature in DCM.
Mitsunobu reaction at the ω‑OH to invert and install heteroatom nucleophiles (use with caution for long chains; solubility in THF/PhMe is beneficial).
TEMPO-mediated oxidations for ω‑OH → ω‑CHO/ω‑CO2H; subsequent Pinnick oxidation for clean aldehyde → acid conversion.
Formation of urethanes/carbamates from the ω‑OH with chloroformates or CDI-activated carboxylates, enabling block-copolymer linkages.
Materials integration
Grafting onto inorganic/organic surfaces via amide/ester bonds to tailor hydrophobicity, adhesion, and barrier properties.
Self-assembly into lamellar phases; co‑crystallization with complementary H‑bond donors/acceptors to tune melting and mechanical properties.
Target Specificity
Not applicable. This product is a small-molecule lipid building block and is not an antibody, enzyme, or ligand directed at a specific biological target. No antigen/epitope, clone, isotype, or species reactivity information applies.
Frequently Asked Questions
What is the purity of this product?
This product is supplied at ≥98% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 3155-42-8, the molecular formula is C18H36O3, and the molecular weight is 300.48 g/mol. InChIKey VLHZUYUOEGBBJB-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.