This compound belongs to the class of organic compounds known as cyclic ketones. These are organic compounds containing a ketone that is conjugated to a cyclic moiety.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
No assay protocols (e.g., WB, IHC, IF, FC) are applicable to this small-molecule reagent.
Item-specific tested applications: Not specified for this item.
For synthetic protocols, see the “Reaction Conditions” tab for general guidance on representative transformations.
Biological Roles
This compound is a synthetic aliphatic ketone used as a chemical building block and does not have an established endogenous biological role.
General considerations (literature):
Metabolism: If introduced to biological systems, aliphatic ketones typically undergo Phase I carbonyl reduction (to secondary alcohols) and ω/β-oxidation pathways, followed by Phase II conjugation (e.g., glucuronidation). Specific metabolic data for 3-cyclohexylcyclohexan-1-one are not widely reported.
Protein interactions: Lacks ionizable groups; interactions would be driven by hydrophobic contacts and dipolar C=O interactions.
Item-specific biological roles or activities: Not specified for this item; for research use only, not for human or veterinary use.
Buffer Applications
This product is not a buffering agent and is not typically used to prepare aqueous buffer systems.
If employed in biochemistry, it would more likely be used as a hydrophobic substrate or intermediate dissolved in a suitable organic cosolvent (DMSO, EtOH) and then diluted into buffer with attention to final organic content.
For buffer preparation details, refer to appropriate buffering agents (e.g., phosphate, Tris, HEPES) rather than this ketone.
Green Alternatives
While the substrate itself is a hydrocarbon ketone with limited “green” substitution options, greener choices can be made in processes that employ 3-cyclohexylcyclohexan-1-one.
Replace chlorinated solvents (DCM, CHCl3) with EtOAc, 2-MeTHF, CPME, or toluene where reaction compatibility allows (e.g., Baeyer–Villiger and reductions).
Use bio-based ethers (2-MeTHF) instead of THF/Et2O for organometallic additions; improved safety (higher bp, lower peroxide formation than Et2O) and renewable sourcing.
Prefer catalytic hydrogenation (H2, Pd/C) over stoichiometric metal hydrides when feasible; water or EtOH as solvent can be viable with appropriate catalysts.
Oxidations: H2O2-based systems or Oxone with organocatalysts can replace peracids in some Baeyer–Villiger protocols, reducing halogenated waste.
Comparison (general):
THF vs 2-MeTHF: similar polarity; 2-MeTHF is partially water-immiscible, easier workup, often derived from biomass.
DCM vs EtOAc: EtOAc is biodegradable, lower toxicity; may require temperature adjustments due to bp differences.
Trade-offs:
Greener solvents may alter selectivity (e.g., enolate geometry, aggregation state). Re-optimize base/catalyst loadings and temperatures when switching.
Note: No item-specific green certifications are provided. Not specified for this item; refer to CoA/Spec Sheet.
Pharmaceutical Uses
No pharmacopeial/excipient status or formulation role is provided for this item. Not specified for this item; refer to CoA/Spec Sheet.
General context (non-clinical):
In process chemistry, aliphatic ketones like 3-cyclohexylcyclohexan-1-one can serve as intermediates en route to more complex targets (e.g., tertiary alcohols, amines, lactones), contributing lipophilicity and conformational constraint.
Any use would be confined to research, route scouting, and preclinical process development. No medical or clinical claims are made.
Physical Properties
Item-specific specifications:
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Computed/literature values (for reference only; not product specifications):
Molecular formula (calculated): C12H20O
Molecular weight (calculated): ~180.29 g/mol
Physical state: typically a colorless to pale liquid or low-melting solid for C12 alicyclic ketones (literature, general trend).
Solubility: expected to be practically insoluble in water; miscible with common organic solvents (hexanes, toluene, diethyl ether, THF, dichloromethane) (literature, qualitative).
Volatility: significantly lower than acetone/MEK; high-boiling ketone behavior (literature, qualitative).
Exact BP/MP, density, refractive index, logP, pKa, and UV cutoff are not available in the provided Product Data. Not specified for this item; refer to CoA/Spec Sheet.
If precise values are critical (e.g., for distillation cut setting or GC calibration), consult the lot-specific CoA or measure under your laboratory conditions.
Quality & Grades
Item-specific (from Product Data):
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
General guidance for this material type:
Typical grades you may encounter for aliphatic ketone building blocks include: technical (suitable for synthesis where trace impurities are tolerable), reagent/AR grade (analytical reagent), and high-purity ≥98–99% for sensitive transformations.
Chromatography-sensitive work (e.g., UV detection ≤210–220 nm) may require low-UV-absorbing solvents/reagents; however, for this high-boiling ketone substrate, “HPLC grade” is generally not relevant unless used as an internal standard or solvent component.
Stabilizers: None are typically added to simple aliphatic ketones like this; any stabilizers or inhibitors would be declared on the CoA/Spec Sheet if present. Not specified for this item; refer to CoA/Spec Sheet.
Identity & purity verification: Routine QC may include 1H/13C NMR, GC/GC–MS, and IR (strong C=O stretch ~1715–1730 cm−1, literature). Water, peroxide, and metal content are typically not specified for non-ether, non-solvent reagents unless process-critical. For this item, any such limits are Not specified; refer to CoA/Spec Sheet.
Recommendation: Check the lot-specific CoA for assay, residual solvents, and identity confirmation before use in critical steps (asymmetric synthesis, catalytic hydrogenation, or medicinal chemistry SAR campaigns).
Reaction & Applications
This bulky aliphatic ketone is a versatile building block. Representative reactivity and uses (literature/practice):
Nucleophilic additions to C=O:
Grignard and organolithium reagents furnish tertiary alcohols. Bulky cyclohexyl substitution can bias addition vs enolization; cooling (−78 to 0 C) and choice of solvent (Et2O/THF) improve selectivity.
Cyanation (e.g., TMSCN + Lewis acid) gives tertiary cyanohydrins, useful for further transformations.
Enolate chemistry at the α-position:
LDA, LiHMDS, or NaHMDS in THF/2-MeTHF at −78 to −20 C generate the kinetic enolate; alkylation or acylation provides α-substituted products.
Aldol condensations with aldehydes/ketones under TiCl4 or boron-mediated conditions yield β-hydroxy ketones; dehydration affords enones.
Reductions/oxidations:
NaBH4/CeCl3 (Luche) favors 1,2-reduction to the secondary alcohol; catalytic hydrogenation (Raney Ni, Pd/C) reduces C=O under pressure.
Baeyer–Villiger oxidation (m-CPBA, peracids, or H2O2/organocatalyst) migrates the more substituted group, likely yielding an ε-lactone after ring expansion (literature outcome for cyclohexanones).
Enamine formation (pyrrolidine) enables α-functionalization under mild conditions.
Application contexts:
Precursor to rigid, lipophilic fragments in materials and medicinal chemistry scaffolds (no clinical claims), and as a hydrophobic handle in ligand design, surfacing studies, or polymer additives where volatility must be minimized.
Reaction Conditions
General literature guidance for typical transformations (not product specifications):
Enolate formation/alkylation:
Base: LDA or LiHMDS (1.1–1.5 equiv)
Solvent: dry THF or 2-MeTHF
Temperature: −78 to −20 C (kinetic control)
Electrophiles: primary alkyl halides, MeI, benzyl bromides; quench with NH4Cl.
Grignard/organolithium addition:
Reagent: RMgX or RLi (1.1–2.0 equiv)
Solvent: anhydrous Et2O/THF/2-MeTHF
Temperature: −78 to 0 C (to suppress enolization)
Workup: saturated NH4Cl or Rochelle’s salt for exotherm control and emulsions.
Reductive amination:
Amine (1.2–3 equiv), NaBH3CN (1.5–2 equiv) or NaBH(OAc)3 (2–3 equiv)
Solvent: MeOH, DCE, or AcOH/MeCN depending on system
Temperature: 0 to rt; pH 5–6 for NaBH3CN.
Baeyer–Villiger oxidation:
Oxidant: m-CPBA (1.5–2.0 equiv) in DCM or H2O2/Urea with catalyst
Temperature: 0 to rt
Add base scavenger (NaHCO3) to control acid byproducts when using peracids.
Carbonyl reduction (Luche):
NaBH4 (1.2 equiv), CeCl3·7H2O (0.1–1.0 equiv)
Solvent: MeOH/EtOH at 0 to 5 C to moderate rate.
Notes:
Dry, oxygen-free conditions improve outcomes for base/organometallic chemistry; flame- or oven-dry glassware, inert gas purge, molecular sieves where appropriate.
Given steric bulk, reaction times may be longer than for unhindered cyclohexanone; monitor by TLC/GC.
Yields vary widely (50–90% typical across transformations in literature) depending on electrophile and conditions.
Safety & Handling
Item-specific (from Product Data):
Storage conditions: Room temperature
Shipped in: Normal
GHS classification, signal word, pictograms, H-statements: Not specified for this item; refer to SDS.
General safety guidance for aliphatic ketones (literature/best practice; defer to SDS for authoritative details):
Hazards: Many aliphatic ketones are combustible and can cause irritation to eyes/skin. High-boiling ketones may present low vapor pressure but can still emit vapors; avoid inhalation.
PPE: Use chemical-resistant gloves (e.g., nitrile), safety goggles, lab coat. Handle in a fume hood to control vapors/aerosols.
Incompatibilities: Strong oxidizers (risk of exotherm), strong bases with active metals (enolate formation and exotherm), and reducing agents like LiAlH4 (vigorous hydrogen evolution/heat). Avoid acid chlorides/anhydrides without controlled conditions (acylation).
Handling: Minimize exposure, avoid ignition sources, and use grounded equipment if transferring bulk liquids.
First aid (overview):
Inhalation: Move to fresh air; seek medical attention if symptoms persist.
Skin contact: Wash with soap and water; remove contaminated clothing.
Eye contact: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; seek medical advice if irritation continues.
Ingestion: Rinse mouth; do not induce vomiting; get medical advice.
Spills: Absorb with inert material (vermiculite, sand), place in chemical waste. Ventilate area.
Waste: Dispose of according to local regulations for organic solvent/ketone waste.
Always consult the product-specific SDS for definitive hazard classification and response measures.
Solvent Selection
This product is a substrate/reagent rather than a solvent. Solvent selection thus pertains to reactions performed with 3-cyclohexylcyclohexan-1-one.
General solvent considerations (literature/practice):
Polarity: The substrate is hydrophobic (aliphatic ketone). Choose moderately polar aprotic solvents to dissolve both the ketone and organometallic/base reagents.
Common solvents:
Enolate chemistry: THF, MTBE, CPME, or toluene; hexamethylphosphoramide (HMPA) is obsolete/toxic and should be avoided.
Reductions (NaBH4): MeOH/EtOH (careful gas evolution), i-PrOH, or mixed DCM/MeOH.
Grignard/additions: Et2O, THF, or 2-MeTHF.
Baeyer–Villiger oxidations: DCM, CHCl3, AcOEt, MeCN depending on oxidant.
Solubility profile (qualitative, literature): Poor in water; good in hydrocarbons (hexanes, toluene) and chlorinated and ethereal solvents.
When to choose alternatives:
If high temperatures are required, high-boiling solvents (xylene, anisole) improve solubility and reaction rates while withstanding >120 C.
For green chemistry aims, consider 2-MeTHF or CPME instead of THF/Et2O, and EtOAc/toluene in place of DCM when feasible.
Tip: For rate-limited enolate formation on hindered ketones, solvent polarity strongly influences aggregation of lithium enolates; THF or 2-MeTHF at −78 to −20 C generally improves control and reactivity versus nonpolar hydrocarbons.
Storage & Reconstitution
Item-specific (from Product Data):
Storage conditions: Room temperature
Shipped in: Normal
General guidance for this compound class:
Container: Store in a tightly sealed amber glass bottle to minimize oxidation and volatilization losses.
Atmosphere: Typically air-stable; for long-term storage, a dry environment is recommended. Include desiccant if frequent opening is expected.
Stability: Aliphatic ketones are generally stable at ambient conditions. Avoid prolonged exposure to strong light or heat sources.
Reconstitution: Not applicable; supplied neat. If preparing stock solutions, use dry, oxygen-free solvent (e.g., THF, toluene, DCM) and store aliquots at 2–8 C if necessary to prolong solution stability.
Freeze–thaw: Not relevant for neat liquid/solid; if stored in solution, minimize cycles and use small aliquots.
Always refer to the product’s CoA and SDS for lot-specific guidance and regulatory information.
Research Use Note: For research use only.
Structure & Identity
Brief overview: 3-Cyclohexylcyclohexan-1-one is a saturated, aliphatic ketone comprising a cyclohexanone ring bearing a cyclohexyl substituent at the 3-position. It is a hydrophobic, conformationally flexible building block.
Item-specific (from Product Data):
SKU: C1298557
Product name: 3-Cyclohexylcyclohexan-1-one
CAS: 7122-93-2
PubChem CID: 11116659
InChIKey: 39073 (as provided)
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Computed/literature (general identifiers; not product specifications):
Molecular formula (calculated): C12H20O
Molecular weight (calculated): ~180.29 g/mol
Possible SMILES (literature, non-validated here): O=C1CCC(C2CCCCC2)CC1 (stereochemistry not specified)
Structural features (general description):
Functional groups: one secondary cyclic ketone (cyclohexanone).
Rings: two cyclohexane rings linked via a single C–C bond (not fused); one ring contains a carbonyl at C1.
Substitution pattern: cyclohexyl substituent at the 3-position of cyclohexanone.
Stereochemistry: the 3-substituted cyclohexanone center can be stereogenic; commercial material is typically of unspecified configuration and may be racemic. Multiple chair conformers (axial/equatorial) are accessible.
2D description: a six-membered ring bearing a C=O group with a second six-membered carbocycle attached at the carbon three atoms away from the carbonyl carbon.
Synthetic Utility
Functional group and retrons:
Ketone carbonyl enables: nucleophilic addition (to give tertiary alcohols), imine/enamine formation, reductive amination, and oxidative rearrangement (Baeyer–Villiger) to lactones.
α-C–H activation through enolate/enamine chemistry enables alkylation, acylation, aldol, Michael addition (via enone intermediates).
Retrosynthetic value (literature/practice):
As a masked tertiary alcohol center: plan a Grignard/organolithium addition to the ketone followed by downstream functional group interconversions.
As a precursor to ε-caprolactone analogs via Baeyer–Villiger, enabling ring-opened diols/esters for polymer or surfactant design.
As a hydrophobic fragment: incorporate into scaffolds where increased logP and steric bulk modulate membrane affinity or binding pockets (no clinical claims).
Selectivity and conformational effects:
The 3-cyclohexyl substituent increases steric hindrance, impacting facial selectivity in additions and the stability of axial/equatorial conformers; chelation control (e.g., with Mg2+, Ti4+, or boron reagents) can influence outcomes.
Enolate geometry (E/Z) and site-selectivity (C2 vs C6) can be tuned by base, temperature, and counterion (Li vs K/Na). Bulky bases (LDA/LiHMDS) at low T favor kinetic deprotonation.
Downstream diversification:
Reductive amination, α-halogenation then substitution, Wittig/Julia–Kocienski on derived aldehydes after carbonyl manipulation, and hydroxy-directed transformations from alcohol products.
Target Specificity
This product is a small-molecule reagent and has no immunological target, clone, isotype, or species reactivity.
Item-specific data: Not applicable for this compound type; not specified for this item.
Frequently Asked Questions
What is the purity of this product?
This product is supplied at ≥95% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 7122-93-2, the molecular formula is C12H20O, and the molecular weight is 180.29 g/mol. InChIKey CANCZANBFBDGQT-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.