Ammonium Ferric Sulfate Solution - 5% solution , CAS No.10138-04-2

CAS: 10138-04-2 Cat. No.: A302074 Formula: FeH4NO8S2 Molecular Weight: 266.009 EC Number: 233-382-4
AVAILABLE TO ORDER
GRADE & PURITY 5% solution
Storage
Store at 2-8°C
Shipped In
Wet ice
★
Size
USA
Germany (EU)*
Price
Qty
100ml
A302074-100ml
In stock ≥10
—
$84.90
250ml
A302074-250ml
1 In stock
—
$141.90
Enter a quantity for the sizes you want to add.

Specifications

Specifications & Purity
5% solution
Storage
Store at 2-8°C
Shipped In
Wet ice
This product requires cold chain shipping. Ground and other economy services are not available.
Names and Identifiers
Molecular Weight
266.009

Advanced Data

Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

4 results found

Lot NumberCertificate TypeDateItem
G2213122G2213122Certificate of AnalysisApr 21, 2026 A302074
L2504086L2504086Certificate of AnalysisDec 17, 2025 A302074
I2116395I2116395Certificate of AnalysisJun 23, 2025 A302074
K2308002K2308002Certificate of AnalysisNov 14, 2023 A302074
Chemical and Physical Properties
Flash Point(°C)28°F
Boil Point(°C)85°C
Melt Point(°C)40ºC
Citations of This Product
Solution Calculators
Reviews

Customer Reviews

Application Protocols

No item-specific validated protocols are provided for this product. Refer to the CoA for concentration and acidity before adapting standard methods. Example literature-style workflows that commonly use Fe(III) sulfate solutions:

  • Fe–thiocyanate colorimetry (for SCN− or Fe)

    • Prepare acidified thiocyanate reagent; add aliquot of the ferric ammonium sulfate solution to sample/standard to give micromolar Fe(III) in final mix; develop color for 5–10 min; measure A450–480 nm. Calibrate with standards prepared from a characterized Fe(III) stock.
  • Coagulation jar test (water treatment)

    • Adjust sample pH to target (often 4–7); dose ferric solution to achieve desired mg Fe/L; rapid mix 1–2 min, slow mix 15–20 min, settle 30–60 min; measure turbidity and residual phosphorus/iron; optimize dose and pH iteratively.
  • Alginate gelation

    • Add Fe(III) solution dropwise to sodium alginate under stirring at acidic pH; observe gel formation; cure as required; rinse to remove unbound ions.

These are general examples only. Optimize volumes, concentrations, and times based on the actual concentration and acidity of this specific item and the needs of your method.

Biological Roles

Applicability: The product is a laboratory reagent supplying Fe(III); it is not intended for biological administration. The following points describe general biochemical relevance of ferric ions for context only (literature/general), not specific to this item.

  • Iron in biology

    • Fe3+/Fe2+ redox cycling underlies numerous metalloenzymes (e.g., cytochromes, dioxygenases) and electron-transport processes.
    • In aqueous physiological environments, iron is tightly chelated by proteins (transferrin, ferritin) or low-molecular-weight ligands to prevent uncontrolled Fenton chemistry.
  • Laboratory use as a Fe(III) source

    • Fe3+ solutions are used to reconstitute iron centers in metalloproteins in vitro, to load chelators for calibration, and to form Fe–ligand complexes for spectroscopic standards.
    • In microbiology and plant science media preparation, defined Fe(III) sources (often citrate/EDTA-complexed) are used to supply trace iron; sulfate-based Fe3+ may serve as a precursor to such complexes in research settings.

Cautions

  • Free Fe3+ at low pH can be cytotoxic and can catalyze radical generation in the presence of peroxides; handle appropriately and avoid unintended biological exposure.

Item-specific note

  • This product is labeled For research use only. No claims are made regarding suitability for clinical, diagnostic, or in vivo use. Composition (concentration, acidity) is not specified for this item; consult the CoA.
Buffer Applications

This product is not a buffering agent. Ferric ammonium sulfate solutions are typically acidic and subject to hydrolysis; they do not provide a defined buffering range.

  • Practical guidance (literature/general)
    • If your method requires controlled pH with Fe(III) present, use an appropriate buffer system compatible with Fe3+ (e.g., acetate at low pH) or complexing agents (e.g., citrate) to manage speciation, recognizing that chelation alters reactivity.
    • Avoid phosphate buffers with free Fe3+ when precipitation of ferric phosphate is undesirable.

Item-specific note

  • Exact pH and acid content of this item are not specified; refer to the CoA. For buffer preparation involving this reagent, first define the target pH and complexation state, then add the iron solution slowly while monitoring pH and turbidity.
Green Alternatives

Context: Selecting a ferric salt solution impacts corrosion, halide load, and downstream environmental footprint. While “green” depends on application, chloride-free ferric solutions (sulfate-based) are often favored where chloride corrosion or halide waste is problematic.

Comparison (literature/general)

  • Ferric ammonium sulfate solution (this product)

    • Pros: Chloride-free; effective Fe3+ source; can be stabilized by sulfate acidity; often lower corrosion to stainless steel than chloride analogs; ammonium can be biologically assimilable in wastewater contexts.
    • Cons: Adds sulfate and ammonium to effluent; acidity management required to prevent hydrolysis; may have higher mass per mole of Fe compared to FeCl3, impacting transport.
  • Ferric sulfate solution (Fe2(SO4)3)

    • Pros: Chloride-free; higher Fe content per mass relative to alum-type double salts; established coagulant.
    • Cons: Can exhibit similar hydrolysis/acidification needs; may be less stable without acidification.
  • Ferric chloride solution (FeCl3)

    • Pros: High Fe content; widely available; effective coagulant and etchant.
    • Cons: Chloride introduces corrosion risks; halide-containing waste streams.

Greener practice tips

  • Right-size Fe dose to minimize metal and sulfate loading.
  • Reuse or regenerate Fe where feasible (e.g., redox cycling in advanced oxidation studies).
  • Use closed-loop rinses and capture iron-containing sludge for appropriate recycling.

Note: The item’s exact concentration and acidity are not specified; verify before life-cycle and waste calculations.

Pharmaceutical Uses

No medical or clinical uses are claimed for this product. It is supplied For research use only.

General manufacturing/formulation context (literature/general)

  • Ferric salts may be used in non-therapeutic pharmaceutical processing steps (e.g., as coagulants in wastewater from manufacturing or as analytical reagents in QC laboratories).
  • Ferric ammonium sulfate is not a common pharmaceutical excipient. Where iron salts are used in dosage forms, they are typically different iron sources and strictly regulated; such applications are outside the scope of this product.

Practical note

  • If an application requires GMP-compliant iron reagents or pharmacopeial grades, verify compendial status and supply chain controls. The grade/purity and concentration for this specific item are not specified; consult the CoA/Spec Sheet if considering any manufacturing-adjacent use (e.g., analytical support, utilities treatment).
Physical Properties

Item-specific (as supplied)

  • Physical state/appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Concentration, density, pH, refractive index: Not specified for this item; refer to CoA/Spec Sheet.

Literature/general properties (solute: ferric ammonium sulfate, dodecahydrate)

  • Appearance (solid): colorless to pale violet crystals (literature).
  • Solubility: soluble in water; limited or negligible solubility in common organic solvents (literature). Approximate solubility increases with temperature; sulfate solutions are typically acidic due to Fe3+ hydrolysis (literature).
  • pKa/acid-base: Fe3+ is a strong Lewis acid; aqueous solutions are acidic from hydrolysis to [Fe(H2O)6]3+ → [Fe(H2O)5OH]2+ + H+ (literature).
  • LogP: not applicable for an inorganic salt (literature).
  • Boiling/melting point: not meaningful for the aqueous solution; the crystalline dodecahydrate melts/dehydrates on heating without a sharp BP (literature).
  • Hygroscopicity: alum-type salts can effloresce/dehydrate; in solution, water activity and temperature govern stability (literature).

Practical implications

  • Expect an aqueous ionic solution with moderate to high ionic strength; conductivity and acidity will depend on formulation (not specified here).
  • For precise physical parameters (concentration, density vs. temperature, pH), consult the item’s CoA/SDS. Do not assume literature values for your quantitative work.
Quality & Grades

Item-specific grade/purity details are not provided for this product listing.

  • Item-specific statement

    • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
  • General context (literature/industry)

    • Analytical reagent (AR) or ACS-grade ferric ammonium sulfate denotes tight control of impurities (alkali metals, heavy metals) suitable for quantitative analysis (e.g., redox/colorimetric assays).
    • Solutions offered for analytical use may be standardized to a defined normality or molarity and may be stabilized by controlled acidity to suppress hydrolysis of Fe3+; the exact concentration and stabilizer content must be confirmed on the CoA.
    • For spectroscopic or HPLC-related applications, “low UV absorbance” is typically relevant to organic solvents; for inorganic salt solutions, clarity and absence of particulate/colloids are more critical.
  • Stabilizers/additives

    • Some commercial Fe(III) sulfate solutions include excess sulfuric acid to maintain Fe3+ solubility and prevent hydrolysis; stabilizer presence and amount are item-specific and should be verified on the Spec Sheet.

Recommendation

  • Match grade to application: standardized analytical solution for titrimetry/colorimetry; general reagent grade for routine precipitation/coagulation or Fe3+ supply. Always verify concentration, acidity, and trace-metal profile on the CoA before quantitative use.
Reaction & Applications

This ferric ammonium sulfate solution serves as a convenient aqueous source of Fe(III) under sulfate conditions. Typical laboratory and manufacturing uses include the following (literature/general), with the caveat that exact concentration and acidity must be verified on the CoA before quantitative work.

  • Analytical chemistry

    • Colorimetric iron assays: Fe3+ forms intensely colored complexes with thiocyanate; FAS solution is used as a Fe(III) standard or reagent in spectrophotometric determinations of thiocyanate or iron.
    • Precipitation tests: As an Fe3+ source for phosphate/arsenate precipitation and for evaluating anion responses in qualitative analysis.
  • Materials and processing

    • Coagulation/flocculation: Fe(III) salts act as coagulants for colloids and phosphates in water treatment studies; ammonium ferric sulfate offers chloride-free operation.
    • Mordanting and etching: Fe3+ can serve as a mordant in dyeing of natural fibers and in certain etching protocols where sulfate is preferred over chloride.
  • Synthetic and catalytic roles

    • Lewis acid/oxidant: Fe(III) catalyzes or mediates oxidation and electrophilic activation in aqueous or mixed-solvent systems (e.g., oxidative coupling, nitration assistance in sulfuric media); reaction conditions must control hydrolysis.
    • Polymer/materials chemistry: Crosslinking of polyanions (e.g., alginate) via Fe3+ coordination, producing gels with distinct mechanical properties compared with Ca2+.

Practical tips

  • Maintain acidity (often with H2SO4) to keep Fe3+ in solution and minimize formation of Fe(OH)3.
  • Avoid contamination with reducing agents which may generate Fe2+ and alter reactivity.
  • Use plastic or acid-resistant glassware when high acidity is present; avoid carbon steel.
Reaction Conditions

Because the exact concentration and acidity of this item are not specified, the following guidance is general and literature-based for Fe(III) sulfate/ammonium sulfate aqueous systems.

  • Solvent and acidity

    • Typical medium: water or water–acid mixtures. Many protocols maintain 0.01–1 M total Fe(III) with 0.01–1 M H2SO4 to suppress hydrolysis (literature ranges; choose per method).
    • pH: Often <2 for clear solutions; near-neutral conditions lead to Fe(OH)3 precipitation unless chelators are present.
  • Temperature

    • 20–60°C commonly used to accelerate reactions (e.g., coagulation, complexation kinetics); higher temperatures can promote hydrolysis/precipitation if acidity is insufficient.
  • Stoichiometry and dosing

    • Analytical colorimetry: micromolar–millimolar Fe(III) with ligand excess (e.g., thiocyanate 10–100×) to drive complex formation; measure at characteristic wavelengths (e.g., ~450–480 nm for Fe(SCN)n complexes; literature).
    • Coagulation: jar-test dosing spans a few to hundreds of mg Fe/L depending on water matrix; optimize by sweep floc formation and residuals monitoring (literature).
  • Catalysis/oxidation

    • For oxidative coupling or advanced oxidation, Fe(III) is sometimes combined with peroxides or reductants to cycle Fe2+/Fe3+; control redox potential and quench safely.
  • Materials formation

    • Polyanion gelation: add Fe(III) solution slowly to polymer under stirring; monitor viscosity and pH; cure time minutes to hours depending on crosslink density.

Always verify your starting solution’s Fe concentration and acidity from the CoA and adjust conditions accordingly.

Safety & Handling

Authoritative safety information is provided on the SDS. The following are general laboratory considerations for ferric ammonium sulfate solutions.

Item-specific hazard data

  • Signal word, H-statements, GHS classification, pictograms: Not specified for this item; refer to SDS.

General safety characteristics (literature/typical for Fe(III) sulfate solutions)

  • Irritation: Aqueous Fe3+ sulfate solutions are typically acidic and may cause skin/eye irritation.
  • Oxidizing character: Fe(III) salts are mild oxidants; avoid contact with strong reducing agents, finely divided metals, and bases that can cause exothermic neutralization and precipitation.
  • Incompatibilities: Strong bases (precipitation of Fe(OH)3), strong reducing agents, cyanides (complexation), carbon steel and reactive metals (corrosion in acidic media). Avoid mixing with hypochlorites and peroxides unless procedures specifically require it.

PPE and handling

  • Wear safety glasses or face shield, lab coat, and appropriate chemical-resistant gloves (e.g., nitrile). Use in a fume hood if aerosol/mist generation is possible.
  • Avoid inhalation of mists; prevent contact with skin and eyes; wash thoroughly after handling.

First aid (overview; defer to SDS)

  • Eyes: Immediate irrigation with water for ≥15 min; seek medical attention.
  • Skin: Remove contaminated clothing; rinse with water. Seek attention if irritation persists.
  • Ingestion/inhalation: Rinse mouth; move to fresh air; seek medical advice.

Spill/cleanup and waste

  • Absorb small spills with inert material; collect for disposal. Rinse area with water while controlling runoff. Dispose of as aqueous inorganic waste per local regulations.
Solvent Selection

Applicability: This product is itself an aqueous solution of an inorganic salt; solvent selection is largely about the aqueous matrix and any co-acids present.

  • Polarity and miscibility (general)

    • Matrix: water; fully miscible with water. Not miscible with most nonpolar organic solvents. Partitioning into organics is negligible due to ionic nature.
    • Dielectric environment: high dielectric constant (~78 for pure water at 25°C; literature), enabling strong solvation of Fe3+ and sulfate.
  • Practical considerations

    • If dilution is required, use high-purity water (distilled/deionized). Maintain acidity if the stock is acid-stabilized to avoid Fe(OH)3 precipitation upon dilution.
    • For biphasic or extraction workflows, Fe3+ remains in the aqueous phase unless chelated by strong hydrophobic ligands.
    • For spectrophotometry (e.g., Fe–thiocyanate complex), use acidified aqueous media to control speciation and background absorbance.
  • Choosing among alternatives

    • Ferric chloride solutions: higher chloride activity; more corrosive to stainless steels; useful when Cl− complexation is desired.
    • Ferric sulfate or ferric ammonium sulfate solutions: chloride-free, often preferred where chloride-sensitive systems are involved (e.g., certain corrosion studies, catalysis, or materials processing).
  • Small comparison (literature/general)

    • FeCl3(aq): strong Lewis acidity; introduces Cl−; can form FeClx complexes.
    • Fe2(SO4)3 or NH4Fe(SO4)2(aq): introduces SO42−/HSO4−; typically lower halide-induced corrosion; acidity often maintained with H2SO4.

Note: Exact acidity and ionic strength of this item are not specified; confirm on CoA for method development.

Storage & Reconstitution

Item-specific conditions

  • Storage: Store at 2–8°C (per product data). Avoid freezing unless explicitly allowed on the CoA.
  • Shipping: Shipped on wet ice.

General handling of ferric ammonium sulfate solutions (literature/practice)

  • Keep container tightly closed to minimize atmospheric CO2 ingress, which can raise pH and promote hydrolysis/precipitation of Fe(OH)3.
  • If crystals or precipitate appear upon cold storage, allow to warm to room temperature and mix to re-dissolve. If insoluble residue persists, the solution may have hydrolyzed; verify clarity and Fe concentration before use.
  • Do not store in reactive metal containers; use glass or compatible plastics. Rinse closures to prevent salt crystallization.
  • If the formulation is acid-stabilized, maintain headspace minimal and avoid dilution with unbuffered water that could raise pH.

Reconstitution

  • Not applicable: supplied as a ready-to-use solution. If dilution is required, use high-purity water and replicate the acidity stated on the CoA to prevent hydrolysis.

Shelf life and QC

  • Shelf life, concentration, and pH are Not specified for this item; refer to CoA/Spec Sheet. Before analytical or quantitative use, verify appearance (clear, free of particulates) and, if critical, standardize by titration or spectrophotometry.
Structure & Identity

Brief overview: This product is an aqueous solution of ferric ammonium sulfate (often referred to as ferric alum), an inorganic double salt supplying Fe(III) in sulfate medium.

  • Item-specific identifiers

    • CAS: 10138-04-2
    • SKU: A302074
    • InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
    • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/typical identity (for the common crystalline solute)

    • Common name: Ferric ammonium sulfate (ferric alum)
    • Typical crystalline form: NH4Fe(SO4)2·12H2O (literature)
    • Approx. formula weight for the dodecahydrate: ~482.19 g/mol (literature)
  • Structural features (general)

    • Double salt of Fe3+ and NH4+ charge-balanced by two sulfate anions; commonly crystallizes as an alum (isomorphous with other M3+–M'+ sulfates).
    • In aqueous solution, Fe3+ is extensively aquated and hydrolyzed; sulfate remains as counterion (HSO4−/SO4^2− depending on pH). No defined single molecular SMILES adequately represents the solution speciation.
    • 2D depiction (described): central Fe3+ octahedrally coordinated by water/ligands in solution; ammonium cations present; sulfate tetrahedra act as counterions and weak ligands under some conditions.

Notes: Because this is a solution and the exact concentration/speciation are not provided, composition-specific identifiers (e.g., exact formula weight of the solution) are not specified for this item and should be confirmed on the CoA.

Synthetic Utility

Ferric ammonium sulfate solution is a versatile aqueous Fe(III) source. While exact concentration is not specified for this item, the following utilities are well documented in the literature:

  • Lewis acid and oxidant in water or mixed media

    • Promotes electrophilic activation in aqueous nitrations/sulfonations conducted in sulfuric media by stabilizing nitronium generation and scavenging anions.
    • Mediates oxidative transformations (e.g., oxidative coupling of phenols) under controlled conditions; the sulfate matrix can moderate chloride-related side reactions.
  • Coordination-driven assembly and materials preparation

    • Crosslinking of polyanionic polymers (e.g., alginates, poly(acrylic acid)) to form Fe3+-bridged gels and films with distinct mechanical/transport properties.
    • Precursor to Fe(III) complexes with ligands (catechols, hydroxamates, bipyridine, EDTA) for spectroscopic standards or catalysis.
  • Inorganic and analytical syntheses

    • Generation of standard Fe(III) solutions for redox and colorimetric methods (e.g., Fe–thiocyanate, Fe–phenanthroline after reduction).
    • Precipitation/co-precipitation of oxides/hydroxides and ferric phosphate under defined pH, useful for preparing reference materials.

Practical tips

  • Maintain acidic conditions during reaction setup to suppress hydrolysis and colloid formation; add base or nucleophiles last and with monitoring.
  • Avoid strong reducing agents unless Fe2+ formation is intended; speciation changes impact both kinetics and selectivity.
  • Control temperature to manage hydrolysis and precipitation in concentrated systems.
Target Specificity

Not applicable. This product is a chemical reagent solution and has no biological target specificity (no antigen/epitope, clone, or isotype). If you need selectivity, use appropriate ligands or chelators to confer specificity to Fe(III) in your assay or process.

Frequently Asked Questions

How should this product be stored?
Store at 2–8 °C. Refrigerated storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 10138-04-2, the molecular formula is FeH4NO8S2, and the molecular weight is 266.009 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.