Antimicrobial agent-29 (Compound C35) affects the interaction between human hemoglobin and Staphylococcus aureus IsdB hemophore.Antimicrobial agent-29 helps the discovery ofIsdB:Hb PPI inhibitors.
Specifications
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
This product requires cold chain shipping. Ground and other economy services are not available.
Names and Identifiers
Molecular Weight
394.40
Advanced Data
Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Solution Calculators
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
No vendor-validated protocols are provided for this item. The following are general, non-item-specific examples for small-molecule antimicrobial evaluation.
Example 1: Broth microdilution MIC (general)
Prepare a sterile 10–50 mM DMSO stock; make serial twofold dilutions in cation-adjusted Mueller–Hinton broth (bacteria) or RPMI 1640 + MOPS (fungi), keeping final DMSO constant (≤0.5–1%).
Inoculate to 5×10^5 CFU/mL; incubate per organism standard (e.g., 16–20 h at 35 ± 2 °C for many bacteria).
Read MIC as the lowest concentration with no visible growth/turbidity. Include solvent control and known active comparators.
Example 2: Time–kill kinetics (general)
Expose logarithmic-phase culture to 1×, 2×, and 4× MIC equivalents; sample over time (0–24 h), plate dilutions, and count CFUs to assess bacteriostatic vs bactericidal trends.
Example 3: Synergy checkerboard (general)
Combine Antimicrobial agent-29 with a comparator across a 2D dilution matrix; compute FICI to evaluate interaction (synergy/additivity/antagonism).
Note: These examples are provided for methodological guidance only and are not validated for this specific product. Optimize conditions based on your organism, media, and internal SOPs.
Biological Roles
Item-specific biological targets and roles are not provided for Antimicrobial agent-29. The following context reflects general use of small-molecule antimicrobials as research tools (not specific to this item):
Function in research: Serves as a chemical perturbant to inhibit microbial growth or viability in vitro, enabling studies of cellular pathways related to cell wall/membrane integrity, DNA replication, protein synthesis, or metabolic processes depending on the compound’s true mechanism.
Use in systems biology: Dose–response profiling, transcriptomics/proteomics, and metabolomics under compound challenge help map stress responses and infer potential targets.
Resistance studies: Serial passaging under sub-MIC concentrations can select tolerant mutants; whole-genome sequencing of isolates may reveal resistance-conferring mutations linked to a candidate target or uptake/efflux pathways.
Not endogenous: Such compounds are not natural metabolites of laboratory organisms; they are exogenous small molecules employed to probe microbial physiology.
Because no target, spectrum, or MoA is disclosed in the Product Data, users should establish organism panel coverage, cytotoxicity counterscreens (for host cells when relevant), and compound stability in assay media as part of initial characterization.
Buffer Applications
This product is a small-molecule antimicrobial research tool and is not itself a buffering reagent. Consequently, there are no standard buffer system recipes associated with it.
Practical note: Select assay buffers (e.g., cation-adjusted Mueller–Hinton broth for bacteria, RPMI 1640 with MOPS for fungi) based on the microbial system under study. Maintain constant co-solvent concentration (e.g., DMSO) across control and treatment groups to ensure valid comparisons.
Green Alternatives
With structure and physicochemical properties undisclosed, greener choices focus on solvent and workflow design rather than replacing the compound itself.
Greener handling options (general; not item-specific):
Prefer aqueous assay buffers with minimized organic co-solvent. Keep DMSO or alcohols at the lowest effective final concentration (often ≤0.5% v/v) while ensuring compound solubility.
Use ethanol or isopropanol over amide solvents where compatible; they have more favorable environmental and safety profiles.
Scale down assays (microplate formats) to reduce solvent use and hazardous waste.
Employ closed, amber microvials and on-demand reconstitution to limit degradation and extend solution life, reducing repeat preparations.
Example comparison (general):
DMSO vs Ethanol
Solubilization: DMSO > Ethanol
Biocompatibility at low %: Both acceptable; ethanol may perturb membranes sooner.
Environmental profile: Ethanol greener; DMSO has low volatility but persistence concerns.
DMF/NMP vs PEG400 blends
Solubilization: DMF/NMP strong; PEG400 blends moderate but often sufficient.
Toxicological profile: PEG400 preferred where feasible.
Where feasible, investigate formulation aids (cyclodextrins, micelles) to enable aqueous delivery, acknowledging potential biological effects that should be controlled experimentally.
Pharmaceutical Uses
No pharmacopeial status, excipient role, or manufacturing use is provided for this item. It is supplied strictly for research use only (non-clinical, non-diagnostic).
General R&D context (not item-specific claims):
Screening lead/control: Small-molecule antimicrobials may be used as internal standards or benchmark controls in discovery assays during hit validation and SAR campaigns.
Analytical reference: When permitted by internal QA, a characterized lot can serve as a reference material for LC–MS method development (e.g., retention time markers in antimicrobial panels). Confirm purity/identity on receipt and track with stability-indicating methods.
Preformulation studies: Solubility, stability (pH/light/oxidation), and compatibility with excipients can be profiled in early R&D—strictly non-clinical and not for human/animal administration.
Therapeutic or clinical claims are not made for this product.
Physical Properties
Item-specific properties
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Melting point: Not specified for this item; refer to CoA/Spec Sheet.
Boiling point: Not specified for this item; refer to CoA/Spec Sheet.
Density: Not specified for this item; refer to CoA/Spec Sheet.
Refractive index: Not specified for this item; refer to CoA/Spec Sheet.
pKa/logP/logD: Not specified for this item; refer to CoA/Spec Sheet.
Solubility (water/organic): Not specified for this item; refer to CoA/Spec Sheet.
General guidance (literature/practice; not item-specific)
Small-molecule antimicrobial screening compounds are commonly reconstituted in anhydrous DMSO to prepare concentrated stocks (e.g., 10–50 mM; set by your assay design). If aqueous delivery is needed, dilute the DMSO stock into suitable assay buffer immediately before use, keeping final DMSO ≤0.5–1% v/v to minimize solvent effects on microbes.
For poorly soluble chemotypes, co-solvent blends (DMSO:water, DMSO:PEG400:water, or DMSO:ethanol:water) and gentle warming (≤40 °C) with brief sonication can assist dissolution. Filter through 0.22 μm PTFE/nylon if particulates remain.
Avoid prolonged exposure of reconstituted solutions to light, oxygen, and moisture; many heterocycles and conjugated systems are light/air sensitive in solution.
Quality & Grades
Item-specific quality information
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Stabilizers/Inhibitors: Not specified for this item; refer to CoA/Spec Sheet.
Interpreting typical grades for small-molecule screening compounds (general guidance)
Screening/Library grade often denotes high chemical purity verified by HPLC/UPLC and structural identity by NMR/MS. Many vendors provide ≥95% area purity for screening compounds; this is an industry convention, not a guarantee for this item—please confirm on the CoA.
Low water content and residual solvent levels are important for assay reproducibility, particularly for hygroscopic or basic compounds; consult the CoA for Karl Fischer water, residual solvents, and salt form identity (free base vs. HCl salt, etc.).
If a stabilizer is listed on the CoA (e.g., BHT for easily oxidized motifs), it can affect bioassays at high concentration. Adjust controls accordingly or purify/remove stabilizer if necessary.
Recommended qualification steps (user-side QC)
Verify identity (LC–MS) upon receipt; record exact mass and retention time under your LC conditions.
Check purity by analytical HPLC/UPLC at two wavelengths (e.g., 210/254 nm) to detect non-chromophoric impurities.
Establish a reference spectrum (1H NMR in DMSO-d6/CDCl3, as soluble) for archival and future comparability.
Reaction & Applications
Applications in research (general; not item-specific claims)
Antimicrobial agent-29 is positioned as a small-molecule tool for microbiology and chemical biology workflows. Typical uses include:
In vitro antimicrobial susceptibility testing (broth microdilution, agar dilution, time–kill studies) to estimate MIC/MBC against bacterial or fungal strains in research settings.
Chemical probe studies to explore microbial stress responses, resistance mechanisms, and synergy with standard-of-care agents using checkerboard or time–kill synergy assays.
Target deconvolution campaigns (chemoproteomics, resistance mutation mapping, or metabolomic profiling) to infer mode of action.
Assay development and QC as a positive/benchmark control in screening panels (when its activity spectrum is established in-house by the user).
Notes on chemical handling for biological assays (general)
Prepare concentrated stock solutions in dry DMSO; aliquot to avoid freeze–thaw cycles and moisture uptake.
Use solvent-matched negative controls and, where relevant, media controls to account for solvent and nutrient effects.
For light/air-sensitive chemotypes, minimize exposure: prepare stocks under low light, flush headspace with inert gas where practical, and store tightly sealed at −20 °C.
No synthetic or bench-reaction applications are provided in the Product Data; this product is positioned primarily as a research probe rather than a general synthetic reagent.
Reaction Conditions
Bench chemical reaction conditions are not applicable to this product as supplied because no reactive function or intended synthetic role is specified in the Product Data.
For biological experiments (general guidance; not item-specific):
Stock preparation: Dissolve in anhydrous DMSO to a convenient concentration for dosing (e.g., 10–50 mM depending on solubility and assay design). Filter sterilize if aseptic work is required.
Dosing: Add to assay medium to achieve final test concentrations over a logarithmic range (e.g., serial twofold dilutions) with constant solvent % in all wells/tubes.
Incubation: Follow the relevant standard (e.g., CLSI/EUCAST methods) for temperature, atmosphere, and time appropriate to the organism.
Consult the SDS and CoA for any item-specific handling constraints (light sensitivity, maximum temperature exposure, or pH stability), which are not specified here.
Safety & Handling
GHS and hazard statements (item-specific)
Signal word: Not specified for this item; refer to SDS.
H-statements: Not specified for this item; refer to SDS.
GHS classification: Not specified for this item; refer to SDS.
Pictograms: Not specified for this item; refer to SDS.
Storage and transport (item-specific)
Storage: Store at −20 °C (per Product Data). Keep container tightly closed, dry, and protected from light.
General laboratory precautions (not item-specific; defer to SDS for authority)
Handle in a chemical fume hood; avoid inhalation of dust/vapors and contact with skin/eyes. Wear suitable PPE: lab coat, safety glasses, and appropriate chemically resistant gloves (e.g., nitrile). Wash hands thoroughly after handling.
Unknown toxicity profile: treat as harmful if swallowed, inhaled, or in contact with skin; avoid environmental release.
Incompatibilities (general): segregate from strong oxidizers, strong acids/bases until specific reactivity is known. Avoid contact with reducing agents/metals if the compound is suspected to be halogenated or nitroaromatic (verify via SDS/CoA).
First aid (general): eye/skin contact—rinse with water for at least 15 minutes; remove contaminated clothing. Inhalation—move to fresh air. Ingestion—rinse mouth; seek medical attention. Always consult the SDS for compound-specific response.
Waste: collect organic solutions/solids as hazardous chemical waste according to institutional and local regulations.
Solvent Selection
Because the precise structure is not disclosed, solvent selection should be based on empirical solubility screening and assay compatibility.
Primary stock solvent (general best practice):
DMSO (anhydrous) — broad solvating power, miscible with water; standard for preparing concentrated stocks for bioassays.
Secondary solvents if DMSO is unsuitable (general):
DMF or NMP for highly polar/poorly soluble chemotypes (ensure biocompatible final %).
Ethanol or isopropanol for moderately lipophilic compounds; often acceptable up to 0.5–1% v/v in microbial assays.
PEG400 or Captisol can aid solubilization for difficult compounds (evaluate biological impact in controls).
Aqueous delivery: Dilute the organic stock into pre-warmed assay buffer with vigorous mixing; add stock last to minimize local supersaturation. Maintain consistent solvent % across all wells/tubes.
Comparison (general, not item-specific):
DMSO: strongest solvation, minimal UV absorbance above ~260 nm, but may stress some microbes at >1%.
Ethanol: greener profile, volatile; can perturb membrane integrity at >0.5–1%.
DMF/NMP: powerful solvents; use sparingly due to cytotoxicity concerns in biological systems.
Tips:
Perform a mini solubility screen (DMSO, ethanol, DMF) at room temperature and 37 °C with visual inspection and 0.22 μm filtration to finalize solvent choice.
Storage & Reconstitution
Item-specific storage/transport
Storage: Store at −20 °C (per Product Data). Keep tightly sealed, dry, and protected from light.
Shipped: On ice with ice pads to limit temperature excursions (per Product Data).
General reconstitution guidance (not item-specific)
Bring container to room temperature in a desiccated environment before opening to prevent condensation.
Dissolve the material in anhydrous DMSO to prepare a concentrated stock appropriate for your assays. If required, filter-sterilize through a 0.22 μm PTFE syringe filter.
Aliquot into inert, amber vials/tubes to minimize headspace and light exposure; store aliquots at −20 °C. Avoid repeated freeze–thaw cycles by using single-use aliquots.
For aqueous working solutions, dilute the DMSO stock directly into buffer/media with vigorous mixing; use immediately or within your validated open-vial/use window.
Stability
Solid-state and solution stability parameters (e.g., shelf life, light/air sensitivity): Not specified for this item; refer to CoA/Spec Sheet and perform stability-indicating QC (LC–MS/HPLC) as needed for critical applications.
Category: Small molecules and compound libraries (research use only)
Item-specific identifiers (from Product Data)
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
Structural features
Functional groups, ring systems, stereochemistry: Not specified for this item; refer to CoA/Spec Sheet.
2D structure (verbal description)
A 2D structural description cannot be provided because the precise structure is not disclosed in the Product Data. Consult the product CoA, Spec Sheet, or supplier SDS for structural details, or query the CAS RN (731793-27-4) in trusted databases if structural disclosure is permitted for your use case.
Synthetic Utility
No synthetic building-block role or reactive handle information is provided for this item. Without a disclosed structure, it should not be assumed to function as a reagent or intermediate in organic synthesis.
General guidance (applicable if the structure becomes available):
If functional groups such as halides, nitriles, or activated esters are present, derivatization for SAR (amide formation, cross-coupling, reductive amination) may be feasible. Verify by structural analysis and assess IP constraints.
For library expansion, parallel synthesis around the disclosed scaffold (once known) can probe potency/selectivity and physicochemical balance; maintain analytical comparability to the parent with consistent LC–MS and NMR conditions.
At present, treat Antimicrobial agent-29 as a finished research probe rather than a synthetic reagent.
Target Specificity
No target, pathway, or organism specificity information is provided in the Product Data for Antimicrobial agent-29.
Item-specific details such as molecular target, spectrum (Gram-positive/Gram-negative/fungal), or resistance liabilities: Not specified for this item; refer to CoA/Spec Sheet or internal characterization.
Researchers should determine specificity empirically using:
Panel testing across representative organisms and strains (including efflux/porin mutants where relevant).
Counterscreens for off-target effects in host cells or commensals (when applicable to the study design).
MoA hypothesis testing via resistant mutant mapping, biochemical assays on putative targets, or chemoproteomic capture if the scaffold allows.
Frequently Asked Questions
How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 731793-27-4, the molecular formula is C19H14N4O4S, and the molecular weight is 394.40 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.