GRADE & PURITYReagent Grade?General reagent-grade purity suitable for most laboratory work. Use as a dependable default when no specific higher grade is required.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
Not applicable as standardized bioassay protocols (e.g., WB, IHC, IF, FC) are for biologics/antibodies. For this small-molecule reagent, refer to the Reaction & Applications and Reaction Conditions sections for general synthetic procedures. Always adapt conditions to your substrates and verify by small-scale trials.
Biological Roles
This compound is a synthetic, small-molecule diamine with no established endogenous biological role.
General, literature-based context (not product-specific and not implying therapeutic use):
Morpholine as a motif: The morpholine ring is widely used in medicinal chemistry to improve aqueous solubility, adjust basicity (pKaH ~8–9 for the ring nitrogen), and modulate pharmacokinetic properties. It often serves as a solubilizing, H-bond-accepting heterocycle.
Diamine behavior: The presence of two basic centers enables salt formation (mono- or di-protonated states) that can influence permeability and binding interactions in discovery compounds.
Structure–property influence: The N-methyl substituent on the side-chain amine increases steric bulk and can attenuate hydrogen-bond donation relative to primary amines, potentially reducing metabolic liabilities associated with primary amines.
Important note: Any discussion above is general structure–property insight. This catalog item is provided strictly for research use only (per Product Data). No biological or clinical claims are made or intended.
Buffer Applications
This reagent is not a standard biochemical buffer. While diamines can, in principle, provide pH buffering capacity across ranges bracketing their pKaH values, this compound is not used as a defined buffering agent in analytical biochemistry.
Guidance:
If used in aqueous workups, it can act as a pH adjuster or to form amine salts, but reproducible buffer systems should employ established buffers (e.g., phosphate, HEPES, MOPS) with known pKa and ionic strength characteristics.
For amine-mediated catalysis or scavenging in aqueous media, consider quantifying free-base concentration and ionic strength; otherwise prefer conventional buffers.
Green Alternatives
Greenness considerations for amine-based transformations often center on solvent and reagent choices rather than replacing the amine building block itself.
Strategies (literature/general):
Greener solvent systems:
Replace chlorinated solvents (DCM, chloroform) with EtOAc, 2-MeTHF, CPME, or MeCN when compatible.
Favor bio-derived solvents (2-MeTHF) or low-toxicity alcohols (EtOH, i-PrOH) for reductive amination.
Benign reductants and activators:
Use catalytic hydrogenation (H2, Pd/C or Raney Ni) instead of stoichiometric cyanoborohydride when feasible.
Prefer uronium/phosphonium coupling reagents with safer byproducts, or use CDI/carbonates for carbamate/urea formation under milder conditions.
Process intensification:
Employ aqueous or biphasic media to reduce solvent usage; leverage in situ salt formation to drive extractions, reducing energy-intensive distillations.
Waste minimization:
Design convergent routes installing the morpholine-ethyl-N-methyl unit late-stage to minimize protecting group steps and associated waste.
Comparison snapshot (general guidance):
DCM vs EtOAc: EtOAc offers lower toxicity and better environmental profile; may require temperature adjustment to match solubility.
THF vs 2-MeTHF/CPME: 2-MeTHF/CPME reduce peroxide issues and derive from renewable feedstocks; polarity differences can affect rates/selectivities.
Note: There is no obvious “green substitute” for the specific morpholine-containing amine when it is structurally required; prioritize greener media and reagents instead.
Pharmaceutical Uses
No pharmacopeial excipient status or formulation role is specified for this item. It is supplied for research use only.
General, non-clinical context (literature):
Synthetic intermediate/building block: The morpholine–ethyl–N-methyl fragment is a common solubilizing handle in medicinal chemistry libraries. The diamine can be coupled via acylation, reductive amination, or alkylation to generate diverse analogs.
Salt formation: Readily forms mono- and di-acid salts (e.g., hydrochloride, mesylate, sulfate), which can improve crystallinity and handling during process development.
Process chemistry: As a basic additive or scavenger, analogous amines are sometimes used to neutralize acids or drive equilibria; selection should be justified by impurity and extractables/leachables risk assessments.
Note: No therapeutic or clinical claims are made. Not for human or veterinary use.
Physical Properties
Item-specific specifications (this product):
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight (item): Not specified for this item; refer to CoA/Spec Sheet.
Literature/computed (general reference; not product specifications):
Physical state: typically a polar, hygroscopic liquid for analogous N-alkyl morpholinoethylamines
Acid–base behavior: diamine with two basic sites; conjugate acid pKa values for related systems are commonly in the ranges: morpholine N (pKaH ~8.2–8.6, literature), secondary N-methylamino (pKaH ~10–11, literature). The overall protonation can be diprotic in water depending on pH.
Solubility: expected high solubility in water and polar organic solvents (MeOH, EtOH, acetone, acetonitrile); miscibility with nonpolar solvents is limited but can form complexes/ion pairs.
Volatility: lower than aliphatic amines of similar MW due to hydrogen bonding and polarity; may exhibit amine odor.
Partitioning: logP/logD expected to be low (polar cationic at physiological pH), but value not established for this specific compound.
Boiling/flash points, density, refractive index: Not established here; consult literature or SDS for exact values.
Notes:
Reported values in the literature can vary with salt form, water content, and measurement method. Verify the exact property set on the certificate of analysis (CoA) for the supplied lot.
Quality & Grades
Supplied grade: Reagent Grade (per Product Data). This designation generally indicates suitability for routine synthetic and analytical laboratory use where high purity is required, but without the additional specifications demanded by HPLC/GC gradient, spectrophotometric, or electronic-grade materials.
What Reagent Grade implies (general):
Purity sufficient for most organic synthesis and research workflows.
Typical control of common impurities, but ultra-trace metals, UV cutoffs, water content, and residual solvents are not guaranteed unless stated on the CoA.
Batch-specific details (titrable amine content, residual water, color/APHA, assay) are usually reported on the CoA.
Item-specific notes:
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Stabilizers/inhibitors: Not specified for this item; refer to CoA/Spec Sheet.
Metals, water, peroxides, and UV cutoff: Not specified for this item; refer to CoA/Spec Sheet.
Selection guidance:
For moisture/air-sensitive transformations (e.g., low-base-tolerance couplings), consider verifying water content or preparing an acid salt/free base freshly before use.
For trace analysis or UV-critical applications, contact us for higher-grade or pre-qualified lots with documented absorbance profiles and trace metals.
Reaction & Applications
As a bifunctional diamine, N-Methyl-2-morpholin-4-ylethanamine serves as a versatile nucleophile/base and as a modular fragment for installing a morpholine-ethyl-N-methyl motif.
Representative uses (literature/general):
Reductive amination: Coupling with aldehydes/ketones (NaBH3CN, NaBH(OAc)3, or catalytic H2) to furnish tertiary amines bearing the morpholine-ethyl chain. Control pH (5–6 for NaBH3CN) to minimize over-reduction.
N-Acylation and urea/carbamate synthesis: Reaction with acid chlorides/anhydrides to give amides; with CDI or triphosgene to give ureas/carbamates. Regioselective acylation can be tuned via transient protection or by exploiting differing basicities.
Alkylation (SN2): Displacement on primary halides/mesylates to append the diamine; use polar aprotic solvents and temperature control to limit dialkylation/quaternization.
Sulfonylation: Formation of sulfonamides (e.g., with tosyl chloride) for protection, purification, or as end groups.
Heterocycle construction: As a nucleophilic partner in ring-opening of activated epoxides/aziridines, yielding β-aminated alcohols with embedded morpholine motifs.
Catalyst/auxiliary roles: Morpholine-containing amines can catalyze polyurethane formation, transesterifications, or serve as ligands/bases in phase-transfer and metal-mediated processes.
Practical tips:
Water and CO2 uptake reduce free-base activity; dry over K2CO3 and handle under inert atmosphere for moisture-sensitive steps.
If selectivity between the two nitrogens is required, temporarily protect one site (e.g., Boc on the secondary amine) or use chemoselective acylation conditions.
Prepare and purify as acid salts (HCl, TsOH) for crystallinity and improved handling; liberate free base immediately before use.
Reaction Conditions
General literature guidance (not product specifications):
Reductive amination:
Solvent: MeOH, EtOH, i-PrOH, or MeCN.
Conditions: pH 5–6 (acetic acid) for NaBH3CN; room temperature to 40 °C; 2–24 h depending on substrate.
Alternatives: NaBH(OAc)3 in DCE/MeCN/THF; catalytic H2 (Pd/C, 1–10 mol%) in MeOH/EtOH at 1–5 bar H2.
Tips: Use slight excess of the diamine (1.1–1.5 equiv) to drive imine formation; control acidity to suppress amide formation from acid contaminants.
Acylation/urea formation:
Solvent: CH2Cl2, THF, DMF, or MeCN.
Reagents: Acid chlorides (1.0–1.2 equiv) with base (DIPEA, Et3N); CDI for ureas/carbamates; triphosgene for symmetrical/unsymmetrical ureas.
Temperature: 0–25 °C start; warm to 40–60 °C if needed.
Selectivity: Protect or pre-block the less desired amine when mono-functionalization is required.
Alkylation (SN2):
Solvent: DMF, DMSO, or MeCN.
Base: K2CO3, Cs2CO3, or DIPEA; avoid strong bases that may induce elimination.
Electrophiles: Primary halides/mesylates; 1.1–1.5 equiv; 25–80 °C.
Notes: Use dilute conditions to minimize bis-alkylation or quaternization; add electrophile slowly.
Epoxide ring opening:
Solvent: MeOH, EtOH, or THF; 0–25 °C.
Often proceeds without additional base; regioselectivity controlled by epoxide substitution and solvent polarity.
Expected yields vary with substrate; consult the primary literature and optimize through small-scale scouting experiments.
Safety & Handling
Item-specific hazard data (GHS/SDS):
Signal Word: Not specified for this item; refer to SDS.
H-Statements: Not specified for this item; refer to SDS.
GHS Classification/Pictograms: Not specified for this item; refer to SDS.
General safety guidance for aliphatic diamines and morpholine derivatives (literature; not product-specific):
Hazards: Can be corrosive/irritating to skin, eyes, and respiratory tract; may cause burns on prolonged contact. Amines can be harmful if swallowed or inhaled. Vapors may be irritating. Avoid aerosol formation.
PPE: Use chemical-resistant gloves (e.g., nitrile), lab coat, and splash-resistant goggles; employ a fume hood to control vapors/odors. Consider a face shield for bulk handling.
First aid (overview): Eye/skin contact—immediate decontamination with copious water for ≥15 minutes; remove contaminated clothing. Inhalation—move to fresh air; seek medical attention if symptoms persist. Ingestion—rinse mouth; do not induce vomiting; seek medical attention. Always follow the SDS.
Incompatibilities: Strong oxidizers, acid chlorides/anhydrides, isocyanates, electrophiles; may react with CO2 to form carbamates on exposure to air. Avoid copper alloys (aminolysis/tarnish) and reactive halides without proper controls.
Special risks: Amines can absorb CO2/H2O (hygroscopic); keep containers tightly closed. Some amines form nitrosamines in presence of nitrites under acidic conditions—avoid nitrite contamination.
Fire safety: Combustible; use CO2, dry chemical, or foam for small fires. Thermal decomposition may release nitrogen oxides.
Always defer to the product’s SDS and institutional safety protocols for authoritative instructions.
Solvent Selection
This product is a polar, basic diamine reagent rather than a general-purpose solvent. Solvent choice should support its nucleophilicity, control protonation state, and ensure substrate compatibility.
General solvent compatibility (literature):
Protic/polar solvents: Water, methanol, ethanol—highly soluble; increased protonation lowers nucleophilicity but can aid phase behavior.
Polar aprotics: Acetonitrile, DMF, DMAc, DMSO—excellent solubility; maintain higher free-base fraction (if not acidified) and often used in SN2, reductive amination, and acylation protocols.
Ethers/esters: THF, 2-MeTHF, MTBE, EtOAc—moderate solubility as free base; can be used with added base or in biphasic systems.
When to choose particular media:
Reductive amination: MeOH, EtOH, i-PrOH, or MeCN; balance solubility of carbonyl partner and reductant (NaBH3CN, NaBH(OAc)3, H2/Pd).
Acylation/urea/carbamate formation: CH2Cl2, THF, MeCN, or DMF with coupling reagents (e.g., EDCI/HOBt alternatives) or phosgene equivalents (triphosgene, CDI) as appropriate.
Alkylation (SN2): Polar aprotics (DMF, DMSO, MeCN) enhance rates; include non-nucleophilic base to suppress over-alkylation.
Notes:
Protonation state dictates solubility and reactivity. Free base is more nucleophilic; acid salts (e.g., HCl) are easier to handle and can be liberated in situ with base.
Avoid strongly acidic media when free amine is required; conversely, employ acids to form crystalline salts for purification.
Shipped in: Not specified for this item; refer to CoA/Spec Sheet.
Form supplied/appearance: Not specified for this item; refer to CoA/Spec Sheet.
General handling guidance (literature/good practice; not product-specific):
Keep tightly closed in a dry, well-ventilated place. Amines can absorb CO2 and moisture; consider storing under inert gas for long-term stability.
If provided as the free base and a solid salt form is preferred for handling, prepare an acid addition salt (e.g., HCl) and store desiccated.
Avoid prolonged exposure to air and light to minimize discoloration and formation of trace byproducts.
For weighed portions, dispense quickly and recap immediately; use septum-cap bottles for air-sensitive workflows.
No reconstitution is typically required. If crystallized or viscous, warm gently and, if compatible, dilute with a dry solvent (e.g., MeCN, THF, or EtOH) just prior to use.
Always consult the product’s CoA and SDS for lot-specific recommendations and stability information. Research use only (per Product Data).
Structure & Identity
N-Methyl-2-morpholin-4-ylethanamine is a bifunctional, tertiary/secondary diamine featuring a morpholine ring tethered via the ring nitrogen (4-position) to a two-carbon linker terminating in an N-methylamino group. The 2D structure comprises a six-membered morpholine (1,4-oxazinane) ring with alternating –CH2– units and one O and one N heteroatom; the ring nitrogen is substituted with –CH2–CH2–NH–CH3.
Item-specific identifiers (from Product Data):
CAS: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Computed/literature structural data (for reference; not item-specific specifications):
Preferred name variants (literature): N-methyl-2-(morpholin-4-yl)ethan-1-amine; N-methyl-2-(morpholinyl-4)ethylamine
Structural features: heteroatom-rich, polar, basic diamine with a flexible ethylene linker; no stereocenters; no aromatic rings.
Synthetic Utility
Key reactivity features:
Two differentiated amines: a tertiary-like ring nitrogen (morpholine) and a secondary N-methylamino group. Their differing basicities enable chemoselective transformations under carefully chosen conditions.
Nucleophilicity: Effective in SN2 displacements on activated primary substrates; less effective for hindered secondary centers—risk of elimination and over-alkylation must be managed.
Acylation and sulfonylation: Forms secondary/tertiary amides and sulfonamides. Regioselectivity may favor the more nucleophilic secondary amine; use of acylation catalysts or protecting groups can steer outcomes.
Carbonyl additions via iminium chemistry: Efficient partner for reductive amination with aldehydes/ketones, leveraging formation of iminium/enamine intermediates.
Heteroatom coupling: Can be introduced via chloroformate activation (carbamates) or CDI (ureas). Reaction at the ring N vs side-chain N can be tuned by solvent, base, and temperature.
Retrosynthetic value:
Serves as a late-stage solubilizing appendage. The diamine can be installed via alkylation of morpholine with a 2-haloethyl-N-methylamine or by reductive amination of 2-morpholinoacetaldehyde with methylamine equivalents.
Practical considerations:
Handle as an acid salt for purification/crystallization; liberate free base immediately prior to nucleophilic steps.
Drying over K2CO3 or molecular sieves reduces water content for moisture-sensitive couplings.
Monitor reactions by LC–MS using positive-ion ESI; diamines ionize readily, providing sensitive tracking.
Target Specificity
Not applicable. This product is a small-molecule chemical reagent and does not possess biological target specificity like an antibody, enzyme, or probe. No target, epitope, clone, or isotype information applies.
Frequently Asked Questions
What does Reagent Grade mean?
Reagent Grade is a defined analytical purity tier suitable for general analytical and reagent applications. It specifies a minimum assay percentage, controlled limits on common impurities (water, heavy metals, residue on ignition), and lot-to-lot consistency. Reagent Grade is one of several purity tiers — choose based on the sensitivity and regulatory requirements of your method.
How should this product be stored?
Store at room temperature.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Need help choosing the grade?
Our grade selection guide covers purity, stabilizer status, and application suitability for all variants in our catalog.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.