Trypan Blue Staining Solution (0.5%) - BioReagent

Cat. No.: T1528819
AVAILABLE TO ORDER
GRADE & PURITY BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Store at 2-8°C
Shipped In
Wet ice
★
Size
USA
Germany (EU)*
Price
Qty
100ml
T1528819-100ml
Made to order · 8–12 wks
$39.90
Enter a quantity for the sizes you want to add.

Overview

Trypan Blue is an anionic active dye and the most commonly used reagent for identifying dead cells in cell and tissue culture. The staining principle is based on the fact that viable cells possess intact membranes that exclude the dye, preventing its entry; whereas cells that have lost viability or membrane integrity exhibit increased permeability, allowing Trypan Blue to penetrate and stain the cells blue to pale blue. This enables a simple and rapid distinction between live and dead cells. Trypan Blue can also be phagocytosed by macrophages, making it applicable for in vivo macrophage staining. After staining, cell viability can be quantified by direct microscopic counting or image-based counting, using the formula: Cell Viability (%) = (Total Cells − Blue-Stained Cells) ÷ Total Cells × 100%. The procedure is straightforward, requiring only 3–5 minutes of staining at room temperature. Note: Prolonged staining should be avoided, as extended incubation may lead to dye uptake by viable cells, resulting in underestimated viability. Trypan Blue is potentially toxic and classified as a suspected carcinogen; appropriate personal protective equipment (lab coat and disposable gloves) should be worn during handling. For research use only. Not for clinical diagnosis.

Specifications

Specifications & Purity
BioReagent
Storage
Store at 2-8°C
Shipped In
Wet ice
This product requires cold chain shipping. Ground and other economy services are not available.
Grade
BioReagent
Product Line
Biological Products

Advanced Data

Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Solution Calculators
Reviews

Customer Reviews

Application Protocols

Example protocol for hemocytometer-based viability counting (general guidance; adapt to your SOP):

  • Materials: Cell suspension, Trypan Blue Staining Solution (0.5%), hemocytometer and coverslip, brightfield microscope, pipettes.
  • Preparation: Gently resuspend cells to a uniform suspension. If using adherent cells, detach with minimal stress and quench protease as appropriate.
  • Staining: Mix 10 μL of cell suspension with 10 μL of the 0.5% trypan blue solution (1:1 v/v). Pipette up/down gently to mix without bubbles.
  • Incubation: Allow 2–3 minutes at room temperature. Do not exceed ~10 minutes before counting.
  • Loading: Place coverslip on the hemocytometer. Load 10 μL of the stained cell mixture into the chamber by capillary action; avoid overfilling.
  • Counting: Under 100–200× magnification, count viable (unstained) and non-viable (blue-stained) cells in the prescribed grid squares. Follow standard edge-inclusion rules.
  • Calculations:
    • Viability (%) = 100 × [viable cells / (viable + non-viable cells)].
    • Cell concentration (cells/mL) = (average count per square) × dilution factor × 10^4.
    • For a 1:1 mix with dye, the dilution factor is 2.
  • QC tips: If clumping occurs, pass the suspension through a 35–40 μm strainer. If background is high, consider brief centrifugation/wash and/or sterile filtration of the dye solution.

Note: This is general practice and not a specification for this item. For automated counters, follow the instrument’s trypan blue protocol.

Biological Roles

Trypan blue itself is not a native metabolite and has no physiological role. Its laboratory role is as a membrane-impermeant, anionic diazo dye used to distinguish viable from non-viable cells by exclusion (general/literature).

Mechanistic context (literature):

  • Membrane integrity: Intact lipid bilayers of viable cells exclude the bulky, polyanionic dye; cells with compromised membranes permit dye ingress, staining cytoplasm and rendering the cell blue under brightfield.
  • Osmotic/ionic considerations: Accurate exclusion requires isotonic, near-neutral conditions to avoid artifactual permeabilization.
  • Time dependence: Post-harvest deterioration can increase apparent cell death; prompt analysis minimizes false positives.

Use cases:

  • Rapid viability checks in cell culture workflows (thawing, passaging, pre-transfection, pre-implantation in non-clinical models), and quality control of cell suspensions prior to downstream assays.

Limitations (literature):

  • Early apoptotic cells with intact membranes may be scored as viable; complementary assays (Annexin V, mitochondrial potential dyes) can provide a fuller picture.
  • Dye can faintly tint extracellular matrix or debris, potentially complicating automated segmentation.

Note: All uses are for research applications only (per item-specific Research Use Only note).

Buffer Applications

This product is a staining solution rather than a buffering system. It is typically mixed with cell suspensions prepared in an appropriate buffer.

General guidance (not item-specific):

  • Compatible media: Isotonic, near-neutral buffers such as PBS, HBSS, or balanced salt solutions. Maintain the same buffer throughout sample preparation to prevent osmotic shock upon dye addition.
  • Typical mixing: 1:1 (v/v) mixing of cell suspension with dye solution is common for 0.4–0.5% trypan blue workflows; adjust according to your SOP and instrument requirements.
  • pH range: Neutral pH (~7.2–7.4) is generally recommended for mammalian cells. Exact pH and buffering composition of this item are not specified; refer to CoA.
  • Filtration: If sterility is required, sterile-filter the solution immediately before use.

Not provided for this item:

  • Exact buffer identity, concentration, osmolarity, or additives. Consult the CoA/Spec Sheet if these parameters are critical to your protocol.
Green Alternatives

While this product is an aqueous solution (favorable relative to organic solvent–based dyes), environmental considerations focus on the fate of azo dyes and minimizing hazardous waste.

  • Waste minimization: Prepare only the amount needed per session and collect dye-containing waste separately for proper disposal.
  • Alternative assays (trade-offs, literature):
    • Methylene blue (aqueous, brightfield): Also a membrane-exclusion dye with simpler structure; may offer easier waste handling but has different staining characteristics and can bind biomolecules.
    • Erythrosin B (aqueous): Alternative vital stain for brightfield with distinct spectral properties; sensitivity may differ across cell types.
    • Propidium iodide or 7-AAD (fluorescent): Enable flow cytometry/fluorescence microscopy with high sensitivity; require specialized instrumentation and have their own safety/waste profiles.
    • Calcein-AM/EthD-1 live/dead kits: High-contrast fluorescence; cost and plastic waste may be higher.

Comparison (general attributes):

  • Trypan blue: Simple brightfield readout, no fluorescence needed; azo dye waste stream.
  • Fluorescent dyes: Higher sensitivity and multiplexing; requires lasers/filters and can involve intercalating agents with different hazard profiles.

Implementation tips:

  • If reducing dye waste is a priority, miniaturize counting volumes (micro-hemocytometers or on-chip counting) and switch to sealed slides to limit rinse waste.
Pharmaceutical Uses

No pharmaceutical or clinical use is indicated. Research Use Only (item-specific).

Context (general, non-clinical):

  • Trypan blue is widely employed in research settings for cell viability assessment prior to experimental procedures. It is not intended as an excipient, API, or diagnostic agent for human or veterinary use in this listing.
  • Pharmacopeial status and clinical-grade specifications are not provided for this item. Do not use for any application that requires GMP, clinical, or diagnostic certification unless explicitly stated by accompanying documentation.

If formulation-grade information is needed (e.g., sterility, endotoxin, bioburden, residual solvents), consult the CoA/Spec Sheet or contact technical support.

Physical Properties

Item-specific physicochemical specifications are not provided for this aqueous 0.5% solution.

Item-specific (from Product Data):

  • Concentration: 0.5% (w/v)
  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.

General/literature properties (for trypan blue dye or typical aqueous solutions; not item specifications):

  • Solubility: Trypan blue is highly soluble in water due to multiple sulfonate groups (literature).
  • UV–Vis: Strong absorbance in the visible range with λmax typically around 605–610 nm in aqueous buffers; secondary bands may appear depending on pH/ionic strength (literature).
  • pH: Viability staining solutions are commonly formulated near neutral pH to maintain cell osmolarity and membrane integrity; exact pH for this item is not specified.
  • Density/RI/viscosity: For dilute aqueous dye solutions, these values are close to those of water; exact values for this item are not specified.

Do not interpret any literature or generalized values as specifications. For authoritative values (pH, buffering species, osmolarity, absorbance profile, sterility, and any preservatives), consult the CoA/Spec Sheet.

Quality & Grades
  • Grade: BioReagent (item-specific). This designation indicates suitability for common biological laboratory workflows (e.g., cell culture staining, microscopy, viability assays). BioReagent grade typically emphasizes functional performance in biological systems rather than ultra-trace chemical purity.

What BioReagent grade generally implies (context; not item-specific specifications):

  • Low levels of contaminants that would interfere with routine biological assays.
  • Prepared and packaged to reduce bioburden and adventitious contaminants; sterility is not guaranteed unless explicitly stated.
  • UV–Vis background appropriate for visual/optical cell counting applications.

What is not specified for this item (consult CoA/Spec Sheet if needed):

  • Exact buffer composition, pH, osmolarity, and presence/absence of preservatives.
  • Sterility or endotoxin limits.
  • Any stabilizers, filtrations (e.g., 0.22 μm), or special processing steps.

Practical notes for users:

  • If sterility is essential (e.g., prolonged contact with live cultures), sterile-filter the aliquot through 0.22 μm under aseptic conditions unless the CoA explicitly states sterility.
  • For quantitative optical work, measure the absorbance spectrum of your lot to confirm expected performance (e.g., λmax and baseline).
Reaction & Applications

This product is used for biological staining, not for synthetic reactions. Key application domains include:

  • Cell viability by dye exclusion (general): Viable cells exclude trypan blue due to intact plasma membranes; non-viable cells with compromised membranes take up the dye and appear blue under brightfield microscopy.
  • Hemocytometer-based cell counting: Mix a defined volume of cell suspension with the 0.5% dye, load into a hemocytometer, and enumerate stained (non-viable) vs unstained (viable) cells to calculate viability and total cell concentration.
  • Compatibility: Commonly used with mammalian cell lines, primary cells, yeast, and protozoa (optical contrast dependent). For adherent cells, detach gently to avoid procedural cell death artifacts.
  • Automated counters: Many image-based or impedance-based counters support trypan blue exclusion workflows; follow instrument-specific dilution and imaging parameters.

Practical considerations (general):

  • Mix thoroughly but gently after combining cells and dye to avoid shearing.
  • Minimize incubation time (typically 2–5 minutes) to reduce false positives due to gradual membrane compromise ex vivo.
  • Keep temperature near ambient during the brief staining step for consistency.
  • If high background or precipitates are observed, pre-filter the dye solution (0.22 μm) and check for salt crystallization.

Note: The above are general/literature practices. Specific instructions for this item are not provided; follow your lab SOPs.

Reaction Conditions

Chemical reaction conditions are not applicable. Instead, the relevant parameters are staining/incubation conditions for cell viability assessment (general guidance; not item-specific specifications):

  • Mixing ratio: Commonly 1:1 (v/v) of cell suspension and 0.4–0.5% trypan blue solution, yielding a final dye concentration of ~0.2–0.25% during counting. Verify with your SOP.
  • Cell density: Aim for 1–10 × 10^5 cells/mL in the final mixture for hemocytometer counting to avoid over/under-crowding.
  • Incubation time: 2–5 minutes at room temperature is typically sufficient; avoid long exposures (>10 minutes) that can increase apparent non-viability.
  • Temperature: Ambient (20–25°C) during brief staining. Maintain physiological temperature for prolonged handling of live cells prior to staining.
  • Readout: Brightfield microscopy with a hemocytometer or compatible imaging cytometer. Use consistent illumination to differentiate lightly stained cells from debris.

These parameters are literature/common-practice guidelines and should be adapted to your cell type and instrumentation. This item’s exact instructions are not specified; consult internal SOPs and any instrument manufacturer recommendations.

Safety & Handling

Safety information specific to this catalog item:

  • Storage conditions: Store at 2–8°C (item-specific).
  • Shipped on: Wet ice (item-specific).
  • GHS classification, pictograms, signal word, H-statements: Not specified for this item; refer to SDS.

General laboratory safety guidance for aqueous trypan blue staining solutions (not item-specific; follow your institution’s SOPs):

  • Hazards: Azo dyes can be harmful if ingested or inhaled and may cause skin/eye irritation. Trypan blue strongly stains skin, fabrics, and work surfaces. Avoid aerosol formation and splashes.
  • PPE: Lab coat, nitrile gloves, and safety glasses. Consider splash protection when handling large volumes or centrifuge steps.
  • Handling: Work on a protected surface. Minimize contamination; use sterile technique when working with live cells if sterility is a concern.
  • Incompatibilities: Prevent mixing with strong oxidizers or strong acids/bases that could degrade the dye; avoid exposure to intense light for prolonged periods to minimize photodegradation.
  • First aid (overview; see SDS for authoritative guidance): In case of skin contact, wash with soap and water. For eye exposure, rinse cautiously with water for several minutes and seek medical attention if irritation persists. If inhaled, move to fresh air. If swallowed, rinse mouth and seek medical advice.
  • Waste: Collect dye-containing liquid/solid waste in appropriately labeled containers; dispose according to institutional and local regulations for dye-containing aqueous waste.

Always consult the product SDS for definitive safety, toxicity, and regulatory information.

Solvent Selection

Not a solvent selection question in the classical sense—the product is a ready-to-use aqueous dye solution for viability staining.

Context (general):

  • Matrix: Water-based; typical viability stains are prepared in isotonic, near-neutral buffers to be compatible with mammalian cells. Exact composition for this item is not specified.
  • Miscibility: Fully miscible with aqueous media (PBS, HBSS, balanced salt solutions). Mixing directly with serum-containing media is generally acceptable for short contact times during counting; verify for your application.
  • Avoid: Non-aqueous organic solvents, which can compromise cell membranes and invalidate viability readouts.

Choosing vs alternatives:

  • Trypan blue is a classic exclusion dye for brightfield hemocytometry. If fluorescence-based workflows are preferred, consider nucleic acid–binding dyes (e.g., propidium iodide, SYTOX) with appropriate instrumentation (general guidance).

Tip:

  • For consistent results across samples, dilute cells in the same buffer used throughout sample prep to minimize osmotic shocks when mixing with the dye.
Storage & Reconstitution

Item-specific storage and shipping:

  • Storage conditions: Store at 2–8°C (item-specific).
  • Shipped on: Wet ice (item-specific).

Reconstitution:

  • This is a ready-to-use aqueous staining solution; no reconstitution is required.

Handling and stability (general guidance; not item-specific specifications):

  • Protect from microbial contamination. If sterility is important for your workflow, sterile-filter an aliquot (0.22 μm) before use and handle aseptically.
  • Mix gently before use to ensure homogeneity; inspect for precipitates or color changes. If precipitate is observed, allow to reach room temperature and invert to mix; if unresolved, filter and evaluate performance.
  • Light sensitivity: Store in the original, closed, light-protective container when not in use to minimize photodegradation.
  • Freeze/thaw: Not specified for this item; refer to CoA/Spec Sheet. As general practice for aqueous dye solutions, avoid repeated freeze–thaw cycles.
  • Shelf life/expiry: Not specified for this item; refer to CoA/Spec Sheet.

Always consult the product CoA and SDS for definitive stability and handling information.

Structure & Identity

This product is a ready-to-use, aqueous Trypan Blue Staining Solution at 0.5% (w/v), intended for cell viability assessment by dye exclusion.

  • SKU: T1528819
  • Product name: Trypan Blue Staining Solution (0.5%)
  • Grade: BioReagent (item-specific)
  • CAS, InChIKey, SMILES, Molecular Formula, Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.

General/literature information about the active dye (for context; not item-specific):

  • Common name: Trypan Blue (an anionic diazo dye)
  • Structural features (literature): bis-azo linkage connecting two substituted naphthalene rings; multiple sulfonate groups rendering the dye highly water-soluble; large, polyanionic chromophore with intense absorption in the red/near-IR region.
  • 2D structural description (literature): two naphthalene sulfonate moieties bridged by a central diaminodiphenyl (or analogous) core via azo (–N=N–) bonds; terminal sulfonate substituents confer negative charge; absence of chiral centers.

Notes:

  • The above structural description pertains to trypan blue as a general chemical entity and is provided for background only. Exact composition of the 0.5% solution (buffer salts, preservatives, pH) is not provided and should be verified on the CoA/Spec Sheet.
Synthetic Utility

Not applicable. This product is a prepared aqueous staining solution and is not typically used as a reagent or intermediate in synthetic organic or inorganic chemistry.

For users seeking dyes for synthetic purposes (e.g., as indicators in titrations or as chromophores in materials synthesis), select dry, well-characterized dye powders or synthetic-grade reagents with specified purity, counterions, and water content.

Target Specificity

Not applicable. This product is not an antibody, probe with defined biomolecular target, or affinity reagent. Trypan blue functions by exclusion from intact cell membranes and lacks molecular target specificity in the biochemical sense.

Need help choosing the grade?

Our grade selection guide covers purity, stabilizer status, and application suitability for all variants in our catalog.

View BioReagent grade guide →

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.