Determine the necessary mass, volume, or concentration for preparing a solution.
Description
Atomic number of base material: 14 SiliconPrecursor for the rapid, low temperature deposition of epitaxial silicon and silicon-based dielectrics.
Taxonomy Tree
| Kingdom | Inorganic compounds |
|---|---|
| Superclass | Homogeneous metal compounds |
| Class | Homogeneous metalloid compounds |
| Subclass | Not available |
| Intermediate Tree Nodes | Not available |
| Direct Parent | Homogeneous metalloid compounds |
| Alternative Parents | Metalloid salts Inorganic salts |
| Molecular Framework | Not available |
| Substituents | Homogeneous metalloid - Inorganic salt - Inorganic metalloid salt |
| Description | This compound belongs to the class of inorganic compounds known as homogeneous metalloid compounds. These are inorganic compounds containing only metal atoms,with the largest atom being a metalloid atom. |
| External Descriptors | elemental silicon |
| Flash Point | <50 °F |
|---|---|
| Flash Point | <10 °C |
| Molecular Weight | 56.17 |
| XLogP3 | |
| Hydrogen Bond Donor Count | 0 |
| Hydrogen Bond Acceptor Count | 0 |
| Rotatable Bond Count | 0 |
| Exact Mass | 55.9539 Da |
| Monoisotopic Mass | 55.9539 Da |
| Topological Polar Surface Area | 0.000 Ų |
| Heavy Atom Count | 2 |
| Formal Charge | 0 |
| Complexity | 8.000 |
| Isotope Atom Count | 0 |
| Defined Atom Stereocenter Count | 0 |
| Undefined Atom Stereocenter Count | 0 |
| Defined Bond Stereocenter Count | 0 |
| Undefined Bond Stereocenter Count | 0 |
| The total count of all stereochemical bonds | 0 |
| Covalently-Bonded Unit Count | 1 |
H220:Extremely flammable gas
H280:Contains gas under pressure; may explode if heated
H312:Harmful in contact with skin
H315:Causes skin irritation
H319:Causes serious eye irritation
H332:Harmful if inhaled
H334:May cause allergy or asthma symptoms or breathing difficulties if inhaled
H335:May cause respiratory irritation
H340:May cause genetic defects
H350:May cause cancer
P210:Keep away from heat, hot surface, sparks, open flames and other ignition sources. - No smoking.
P222:Do not allow contact with air.
P230:Keep wetted with ...
P261:Avoid breathing dust/fume/gas/mist/vapors/spray.
P264:Wash hands [and …] thoroughly after handling.
P271:Use only outdoors or in a well-ventilated area.
P280:Wear protective gloves/protective clothing/eye protection/face protection.
P281:Use personal protective equipment as required.
P284:[In case of inadequate ventilation] Wear respiratory protection.
P321:Specific treatment (see ... on this label).
P377:Leaking gas fire: Do not extinguish, unless leak can be stopped safely.
P381:In case of leakage, eliminate all ignition sources.
P302+P352:IF ON SKIN: wash with plenty of water.
P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
P362+P364:Take off contaminated clothing and wash it before reuse.
P403:Store in a well-ventilated place.
P405:Store locked up.
P403+P233:Store in a well-ventilated place. Keep container tightly closed.
P410+P403:Protect from sunlight. Store in a well-ventilated place.
P501:Dispose of contents/container to an approved waste disposal plant.
P203:Obtain, read and follow all safety instructions before use.
P264+P265:Wash hands [and …] thoroughly after handling. Do not touch eyes.
P318:if exposed or concerned, get medical advice.
P317:Get emergency medical help.
P337+P317:If eye irritation persists: Get medical help.
P332+P317:If skin irritation occurs: Get medical help.
P319:Get medical help if you feel unwell.
P342+P316:If experiencing respiratory symptoms: Get emergence medical help immediately.
Our grade selection guide covers purity, stabilizer status, and application suitability for all variants in our catalog.
View Electronic grade grade guide →