Russell Modified Movat Pentachrome Staining Solution - BioReagent,Biological Stain,for microscopy

Cat. No.: R1518553
AVAILABLE TO ORDER
GRADE & PURITY BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Biological Stain ? Biological stain grade — dyes characterized for staining cells and tissues. Use in histology and microscopy where staining consistency matters. for Microscopy ? Microscopy grade — reagents/stains suited to sample prep and imaging. Use in microscopy where clarity and low background are needed.
Synonyms
Russell modified Movat color colored dye
Storage
Store at 2-8°C,Protected from light,Room temperature
Shipped In
Wet ice
Application
Cell Staining
 ·  off list, applied to all prices below.
Size
Status
Price
Qty
9×50ml
R1518553-9×50ml
8-12 wks(?) Production requires sourcing of materials. We appreciate your patience and understanding.
$399.90
Enter a quantity for the sizes you want to add.
🧪

Why this grade

BioReagent,Biological Stain,for microscopy Biological Stain,BioReagent,for Microscopy for sensitive chromatographic and analytical workflows requiring minimal baseline interference.

🌡

Storage & shipping

Store at 2-8°C,Protected from light,Room temperature Ships Wet ice Check lot-specific COA for exact specifications.

📋

Quality documents

SDS, COA, datasheet, and spec sheet available for download. Lot-specific COA accessible via lot number lookup.

📚

Literature proof

Cited in 0 peer-reviewed publications across chromatography, organic synthesis, and cross-coupling reactions.

Overview

  In a narrow sense, connective tissue refers to the three types of fibers it contains: collagen fibers, reticular fibers, and elastic fibers. There are many staining methods for connective tissue, such as Masson trichrome staining, Van Gieson staining, Gomori ammoniacal silver method, and Mallory phosphotungstic acid hematoxylin staining. However, the above methods only focus on the staining of one or two kinds of tissues.

  Russell Modified Movat Pentachrome Staining Solution is widely used for its rich and bright staining. This method is mainly used to demonstrate atherosclerotic plaques. Weigert hematoxylin is used to stain cell nuclei, safranine fuchsin to stain cytoplasm, crocein scarlet to stain collagen tissue, and alcian blue to stain the matrix (proteoglycans). Due to the complicated operation procedure of this kit, the staining effect is highly related to the experience and proficiency of the operator, so it is not easy to obtain consistently satisfactory results. This reagent is for research use only. Not for clinical diagnosis or other purposes.

Product Components and Storage Conditions:

R1518553 
Component
9×50mL
Storage
R1518553A
Hypo Solution
50mL
RT
R1518553B
Alcian Blue Staining Solution
50mL
2-8℃. Store in the dark.
R1518553C
Alkalic Alcohol Solution
50mL
RT
R1518553D
Weigert A
30mL
RT
R1518553E
Weigert B
20mL
RT
R1518553F
Weigert C
10mL
RT. Store in the dark.
R1518553G
Safranin Fuchsin A
40mL
RT
R1518553H
Safranin Fuchsin B
10mL
RT
R1518553I
Phosphotungstic Acid Solution
50mL
RT. Store in the dark.
R1518553J
Weak Acid Differentiation Solution
50mL
RT
R1518553K
Alcoholic Crocein Scarlet Staining Solution
50mL
RT
R1518553L
Bouin Fixative
250mL
RT. Store in the dark.

Immediately before use, mix D:E:F at a ratio of 3:2:1 to obtain Weigert hematoxylin. Do not prepare in advance.

Immediately before use, mix G:H at a ratio of 4:1 to obtain safranin fuchsin staining solution. Do not prepare in advance.

Materials Required:

1. Graded ethanol, distilled water, xylene or eco-friendly dewaxing and clearing agent, neutral balsam

2. Microwave oven

Protocol (For Reference Only):

1. Deparaffinize paraffin sections routinely with xylene or dewaxing and clearing agent, and rehydrate with graded ethanol.

2. Place an appropriate amount of Bouin fixative in a microwave oven, heat moderately for 30–60 seconds, then immediately immerse the sections for 10 minutes.

3. Rinse in running water for 10 minutes.

4. Treat sections in Hypo Solution for 5 minutes, then rinse 2–3 times with distilled water.

5. Stain sections in Alcian Blue Staining Solution for 20 minutes, then rinse in running water for 2–5 minutes.

6. Preheat Alkalic Alcohol Solution in a microwave oven at high power to 45–60 °C, then immerse sections for 10 minutes.

7. Rinse in running water for 2–5 minutes.

8. Stain sections in pre-mixed Weigert Hematoxylin Staining Solution for 60 minutes, protected from light.

9. Rinse briefly in running water, then wash 2–3 times with distilled water, 3–5 minutes each time.

10. Stain sections in pre-mixed Safranin Fuchsin Staining Solution for 1 minute, protected from light.

11. Rinse 2–3 times with distilled water, 3–5 minutes each time.

12. Treat sections in Phosphotungstic Acid Solution for 5 minutes, then transfer directly into Weak Acid Differentiation Solution for 5 minutes.

13. Rinse 2–3 times with distilled water, 3–5 minutes each time.

14. Dehydrate: 95% ethanol for 1 minute, 100% ethanol twice for 1 minute each.

15. Stain sections in Crocein Scarlet Staining Solution for 5 minutes.

16. Dehydrate: absolute ethanol twice for 1 minute each, clear in xylene or dewaxing and clearing agent, and coverslip.

Staining Results:

Nuclei and elastic fibers: Black

Collagen and reticular fibers: Yellow

Proteoglycans: bluish Green

Fibrinoid, deep cellulose: Deep red

Cardiac muscle and smooth muscle: Red

Foam cells: Purple

Precautions: 

1. Due to staining intensity, tissue section quality and other factors, not all five colors may be displayed after staining. Anti-slip section treatment is recommended.

2. Section thickness is generally about 5 μm; elastic fiber differentiation is usually completed within 2–3 minutes.

3. Thorough rinsing in running water to remove Weigert Hematoxylin is critical; inadequate rinsing will inhibit subsequent staining steps.

4. This staining method can demonstrate Cryptococcus neoformans, which is stained bright blue.

5. Use reagents promptly after opening to avoid affecting experimental results.

6. For your safety and health, wear a lab coat and disposable gloves during operation.

Specifications

Synonyms
Russell modified Movat color colored dye
Specifications & Purity
BioReagent, Biological Stain, for microscopy
Stability And Storage
Each component has a shelf life of 1 year under corresponding storage conditions.
Storage
Store at 2-8°C, Protected from light, Room temperature
Shipped In
Wet ice
This product requires cold chain shipping. Ground and other economy services are not available.
Grade
Biological Stain, BioReagent, for Microscopy

Documentation

📋 Safety Data Sheet (SDS)

Comprehensive hazard, handling, storage, and regulatory compliance document.

Download SDS →

✅ Certificate of Analysis (COA)

Lot-specific quality data. Enter your lot number to retrieve the exact COA.

Look up COA →

📊 Datasheet

Quick-reference summary of product specifications and applications.

View datasheet →

🔬 Specification Sheet

Full quality attributes and acceptance criteria for this grade.

View spec sheet →

Advanced Data

Certificates(CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDateItem
ZJ26F0535352Certificate of AnalysisMay 13, 2026 R1518553
Chemical and Physical Properties
SensitivityLight-sensitive
Documents & Articles
Solution Calculators
Reviews

Customer Reviews

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.