Determine the necessary mass, volume, or concentration for preparing a solution.

Ready-to-use (RTU) for sensitive chromatographic and analytical workflows requiring minimal baseline interference.
Store at 2-8°C,Protected from light Ships Wet ice Check lot-specific COA for exact specifications.
SDS, COA, datasheet, and spec sheet available for download. Lot-specific COA accessible via lot number lookup.
Cited in 1 peer-reviewed publications across chromatography, organic synthesis, and cross-coupling reactions.
Product Characteristics
pNPP (p-nitrophenylphosphate) is a chromogenic substrate for Alkaline Phosphatase (AP). In the presence of AP, pNPP is hydrolyzed rapidly to pnitrophenol and inorganic phosphate. Liberated pnitrophenol is seen as a clear yellow color that is measured at 405/620 nm.
pNPP, liquid ready-to-use substrate, is highly active compared to pNPP ONE (cat. No. P494181). The substrate gives superior results due to its sensitivity, allowing very low detection limits.
Composition & Properties
pNPP is a liquid, ready-to-use and aqueous formulation. The buffer solution contains stabilized pNPP and appropriate stabilizing components. Recommended stop solution is an equal volume of 0.1 M sodium hydroxide solution.
Working Procedure
1.The desired amount of substrate is poured into a sealed container and allowed to reach room temperature in the dark.
2.Recommended volumes are 100 µl substrate solution per microtiter well. Development time is typically 15- 30 minutes. Optimal time is determined by the user and will vary according to the procedure and the incubation temperature.
3.100 µl of 0.1 M NaOH is then added and mixed thoroughly.
4.In kinetic assays, the color is read directly at 405 nm. For endpoint assays the absorbance is read at 405/620 nm.
Tips & Tricks
• For use in hot climate countries, due to superior background characteristics, we recommend pNPP ONE (cat. no. P494181)
• A stop solution of 0.1 M NaOH requires no hazardous labelling. In case a higher assay sensitivity is required, a 1.0 M NaOH may be used as stop solution offering an approx. increase of OD of 3%. In both cases a 1 hour stop stability is guaranteed.
Handling & Storage
• Store solution at 2-8 °C in the dark.
• Avoid exposure to light and heat.
• Re-dispense only into bottles made of High Density Polyethylene (HDPE), amber color.
Dispensing guidelines are available upon request.

Comprehensive hazard, handling, storage, and regulatory compliance document.
Download SDS →Lot-specific quality data. Enter your lot number to retrieve the exact COA.
Look up COA →Full quality attributes and acceptance criteria for this grade.
View spec sheet →Find and download the COA for your product by matching the lot number on the packaging.
| Lot Number | Certificate Type | Date | Item |
|---|---|---|---|
| Certificate of Analysis | Aug 13, 2025 | P494193 | |
| Certificate of Analysis | Mar 04, 2025 | P494193 | |
| Certificate of Analysis | Mar 04, 2025 | P494193 | |
| Certificate of Analysis | Apr 27, 2023 | P494193 | |
| Certificate of Analysis | Apr 27, 2023 | P494193 |
| 1. Zizhe Li, Liang Luo, Chaochao Chen, Qiang Li, Qiyuan Zhao, Ghulam Mujtaba Mari, Chen Xing, Xuefeng Xia, Jianzhong Shen, XueZhi Yu, Zhanhui Wang, Yantong Pan. (2025) Environment-friendly dual-mode immunoassay based on the inner filter effect of polydopamine-polyethylenimine copolymer nanoparticles for the highly sensitive detection of norfloxacin. FOOD CHEMISTRY, [PMID:40138822] [10.1016/j.foodchem.2025.143928] |