Protocols

Determination of residues of aminoglycoside antibiotics in experiments

Summary

An aminoglycoside is a carbohydrate that contains one or more amino groups in its glycosidic structure. It is an antibiotic often used as a veterinary drug. Source: Food Safety Monitoring Technology (Chemical Industry Press)

Operation method

HPLC-MS/MS method

Materials and Instruments

Animal Tissue
Phosphate buffer Acetic acid Methanol
SPE Columns Tubes

Move

1. Pre-treatment Weigh 2 g of sample in a 50 mL polypropylene centrifuge tube, add 3 mL of phosphate buffer (10 mmol/L KH2PO4 containing 0.4 mmol/LEDTA and 2% TCA), and homogenize (30-60 s). Plug firmly. Plug tightly and shake vigorously for l0 min. centrifuge at 4000 r/min for 10 min. transfer the supernatant to another centrifuge tube, add 10 mL of phosphate buffer/TAC to the residue, mix, and shake vigorously for l0 min. centrifuge and combine the supernatants. The combined supernatants were adjusted to pH 7.5-8.0 with 30% NaOH. centrifuged, and the fat was removed with an angular spoon if needed. SPE (BakerBondSPEWidePoreCB, 500 mg) column purification: the SPE column was loaded and drenched with 5 mL of MeOH and 5 mL of water. Samples were added at a flow rate of 1-3 mL/min, and the column was drenched with 4-5 mL of water and drained for 5 min. Aminoglycoside antibiotics were eluted with 3 mL of 0% acetic acid/methanol in a 1l5 mL glass centrifuge tube. Concentrate to approximately 0.1 mL with nitrogen at 40 °C and blow dry with nitrogen at room temperature. Add 0.4 mL of 5 mmol/L HFBA, mix and sonicate for 15 min, centrifuge for 10 min at 2500 r/min, transfer to another 0.6 mL polypropylene centrifuge tube and centrifuge for 10 min at 16,000 r/min. Carefully pipette about half of the supernatant into the autosampler bottle. 2. Instrument conditions Chromatographic column: reversed-phase C18 with an inner diameter of 2.1 mm and a length of 100 mm, 3.5 um particle size; Mobile phase: flow rate 0.15 mL/mm, initial 5% MeOH, 75% water, 20% 100 mmol/L HFBA.


For more product details, please visit Aladdin Scientific website.

https://www.aladdinsci.com/

Categories: Protocols
Explore topics: Biochemistry Lab

Da — when not otherwise indicated, molecular weight units are daltons.   Mw — weight-average molecular weight.   Mn — number-average molecular weight.

Products are supplied for research and development use only. Not for use in humans, animals, diagnosis, or therapy.

Cite this article

Aladdin Scientific. "Determination of residues of aminoglycoside antibiotics in experiments" Aladdin Knowledge Base, updated Dec 24, 2024. https://www.aladdinsci.com/us_en/faqs/determination-of-residues-of-aminoglycos-en.html
Was this article helpful? Yes No 0 out found this helpful

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.