T4 DNA Ligase, CAS No.9015-85-4

CAS: 9015-85-4 Cat. No.: T665705 EC Number: 232-770-0 PubChem CID: 168010186
AVAILABLE TO ORDER
GRADE & PURITY Bioactive ? Bioactive grade — verified to retain biological activity in functional assays. Use when the molecule must be functionally active, not just pure. Recombinant ? Recombinant — produced via recombinant expression for defined sequence and consistency. Use for reproducible, animal-free proteins of known origin. ActiBioPure™ ? ActiBioPure™ — Aladdin's premier line for bioactive and recombinant products. Use when both high purity and preserved biological activity are required. High Performance ? High-performance grade with optimized purity and performance characteristics. Use for sensitive analyses where ordinary grades fall short. EnzymoPure™ ? EnzymoPure™ — Aladdin's line of high-quality enzymatic solutions. Use when enzyme purity and defined activity drive assay or process performance. 1000 U/μl
Accession #
P00970
Expression system
E. coli
Bioactivity
1000 U/μl
★
Size
USA
Germany (EU)*
Price
Qty
40KU
T665705-40KU
Made to order · 8–12 wks
$29.90
5×40KU
T665705-5×40KU
Made to order · 8–12 wks
$119.90
Enter a quantity for the sizes you want to add.

Overview

T4 DNA Ligase produced by Aladdin catalyzes the formation of a phosphodiester bond between the 5'-phosphoryl end and the 3'-hydroxyl end of double-stranded DNA or RNA with cohesive or blunt ends. This catalytic reaction requires ATP as a cofactor. Meanwhile, T4 DNA Ligase can repair single-strand nicks in double-stranded DNA, double-stranded RNA, or DNA/RNA hybrids.

SourceRecombinant expressed in Escherichia coli
AppearanceSterile liquid
Storage Buffer20 mM Tris, pH 7.5, 50 mM KCl, 1 mM DTT, 0.1 mM EDTA, 50% (v/v) Glycerol.
Enzyme Concentration1000 U/μl
PurityFree of DNA endonucleases, exonucleases, phosphatases, and RNases, meeting the requirements for routine ligation reactions.
Activity DefinitionOne unit is defined as the amount of enzyme required to give 50% ligation of HindIII fragments of lambda DNA in 30 min at 16℃ in 20 μl of the assay mixture containing 50 mM Tris, pH 7.5, 10 mM MgCl₂, 10 mM DTT, 1 mM ATP, 25 μg/ml BSA and a 5'-DNA termini concentration of 0.12 μM (300 μg/ml). 200 U is equivalent to 1 Weiss unit. The total activity of this product is 200 units, expressed in Weiss units.
Component List
T665705
Component40KU
5×40KUStorage
T665705AT4 DNA Ligase (1000U/μl)
40µl5×40µl-20℃. Avoid freeze/ Thaw cycle.
T665705B10× Ligation Buffer300µl
5×300µl-20℃. Avoid freeze/ Thaw cycle.
Product Applications
T4 DNA Ligase is commonly used for the ligation of DNA fragments to vectors, linkers, adaptors, etc. It can also be used for nick repair and ligase-mediated RNA detection.
Product Advantages
Nick repair and ligase-mediated RNA detection.
Instructions for Use
1. Ligation of PCR products or digested fragments with conventional vectors:
a. Digest 1–2 μg of vector overnight, or for at least 3–5 hours. Ensure complete digestion as far as possible; otherwise, many self-ligated colonies will be generated in subsequent steps.
b. After vector digestion, purify using a purification kit, such as a PCR purification kit / DNA purification kit. Conventional phenol-chloroform extraction followed by ethanol precipitation can also be used. For large fragments (>50–60 bp) generated by digestion, gel extraction is recommended.
c. For PCR products: After gel electrophoresis of PCR products, excise and recover the DNA fragment of the expected size. Recovery from the gel can be performed using a kit or by repeated freeze-thaw methods.
d. Digest the recovered PCR product or other plasmid/DNA fragments requiring digestion with an appropriate restriction enzyme, then purify the digested product.
Note: Digestion at this step does not need to be highly complete; an efficiency of over 80–90% is generally sufficient. Digestion for 1–2 hours is usually adequate. The digested product can be purified using a kit (e.g., PCR purification kit / DNA purification kit) or by conventional phenol-chloroform extraction and ethanol precipitation.
e. Use approximately 25–100 ng of digested and purified vector, and add insert DNA at a 3:1 molar ratio relative to the vector. Set up the ligation reaction according to the table below.
Note 1: In many cases, the amounts of vector and insert are too low to quantify accurately after recovery. In such cases, estimate based on the brightness of electrophoresis bands before recovery. Use a band from the DNA molecular weight marker as a reference, estimate or semi-quantify the brightness ratio between your target band and the reference band, then calculate the final ratio of vector to insert based on the expected recovery yield from purification or gel extraction.
Note 2: 0.2–0.5 μL of ligase per reaction is usually sufficient. The ligase volume can be increased to 1 μL to further improve ligation efficiency.
Vectorapprox. 50–100 ng
Insert fragmentapprox. 3× molar amount relative to vector
10× Ligation Buffer2 μl
Double-distilled water or Milli-Q wateradd to 20 μl
T4 DNA Ligase0.2–0.5 μl
Total volume20 μl
f. Mix gently by pipetting up and down or brief vortexing, then centrifuge at room temperature for several seconds to collect the liquid at the bottom of the tube.
g. Incubate at 20–25°C for 1–2 hours for ligation, or at 16°C overnight. 
Note 1: For blunt‑blunt end ligation, overnight incubation is mandatory. Direct ligation with T4 DNA Ligase shows low efficiency for blunt‑blunt ends; a rapid DNA ligation kit is recommended.
Note 2: For rapid clone acquisition: in a 20 μL cohesive‑end ligation, 10 μL can be used directly for E. coli transformation after 1–2 hours of ligation, and the remaining 10 μL can be incubated at 16°C overnight. If colonies are obtained the next day, proceed to the next step; if not, use the remaining overnight‑ligated product for a second transformation. 
h. The ligation product can then be used directly for transformation of competent cells.
2. Ligation of PCR products with T‑vectors:
a. After gel electrophoresis of the PCR product, excise and recover the DNA fragment of the expected size. Fragment recovery from the gel can be performed using a kit or by repeated freeze‑thaw methods.
b. Use an appropriate amount of T‑vector according to the T‑vector manual, and add insert fragment at a 3:1 molar ratio. Set up the ligation reaction according to the table below.
Note 1: In many cases, vector and PCR product amounts are too low to quantify accurately after recovery. Estimate based on band brightness before recovery, using a DNA marker band as reference. Estimate or semi‑quantify the brightness ratio between the target band and the reference band, then calculate the final vector‑to‑insert ratio based on the expected purification or gel recovery yield.
Note 2: 0.2–0.5 μL of ligase per reaction is usually sufficient. The ligase volume can be increased to 1 μL to further improve ligation efficiency.
T-vectoras appropriate
Insert fragmentapprox. 3× molar amount relative to vector
10× Ligation Buffer2 μl
Double-distilled water or Milli-Q wateradd to 20 μl
T4 DNA Ligase0.2–0.5 μl
Total volumeapprox. 20 μl
c. Mix gently by pipetting up and down or brief vortexing, then centrifuge at room temperature for several seconds to collect the liquid at the bottom of the tube. 
d. Incubate at 20–25°C for 1–2 hours for ligation, or at 16°C overnight.
Note: For rapid acquisition of desired clones: In a 20 μL cohesive-end ligation reaction, 10 μL can be used directly for E. coli transformation after 1–2 hours of ligation, and the remaining 10 μL can be incubated at 16°C overnight. If colonies are obtained the next day, proceed to the next step; if not, use the remaining overnight-ligated product for a second transformation. 
e. The ligation product can then be used directly for transformation of competent bacteria.
3. Ligation of Linker or RNAi fragments with vectors:
a. Digestion and purification of the vector are the same as steps 1a and 1b.
b. Annealing of Linker or RNAi fragments can be performed using an appropriate DNA annealing buffer, such as Annealing Buffer for DNA Oligos (5X).
c. For Linkers or annealed RNAi fragments longer than 8 bp, ligation with the vector can be performed at a molar ratio of 5:1 to 10:1 (insert:vector). For example, if the vector is 0.03 pmol, the insert can be 0.15 to 0.3 pmol. For linkers shorter than 8 bp, the ratio should be adjusted to 10:1 or higher.
d. Except for the amount of insert fragment, proceed with steps 1e–1h.
4. Self-circularization of DNA:
Refer to step 1e, replacing the insert fragment with an appropriate volume of water. Follow steps 1f–1h for the remaining procedures.
5. Ligation of other types of DNA fragments can be performed with reference to the methods above.
FAQ
1. Very low transformation efficiency or very few positive colonies after ligation:
a. The transformation efficiency of competent bacteria may be too low; use a plasmid as a positive control to test competent cell efficiency.
b. Try improving the purity of the vector or insert. For blunt-end ligation, ensure appropriate extension of ligation time.
c. The vector may not be fully digested; use unligated vector for transformation as a negative control.
d. Use the solution storing DNA for transformation as a negative control to check for issues with competent bacteria.
Precautions
(1) For routine E. coli transformation, purification of the ligation product is unnecessary; the ligation mixture can be used directly for transformation. However, for electroporation of E. coli, it is generally recommended to purify the DNA first using a DNA purification kit or phenol-chloroform extraction before electroporation.
(2) For blunt-end ligation or rapid ligation, a rapid DNA ligation kit is recommended. T4 DNA Ligase can perform blunt-end ligation but with lower efficiency.
(3) Routine ligation reactions do not require gel electrophoresis analysis. If gel electrophoresis is needed, incubate at 65°C for 10 minutes first.
(4) Inactivate T4 DNA Ligase to avoid band shift caused by T4 DNA Ligase binding to DNA.
(5) This product is for scientific research use only by qualified personnel. It is not intended for clinical diagnosis or treatment, food or pharmaceutical applications, and must not be stored in ordinary residential premises.
(6) For your safety and health, please wear a lab coat and disposable gloves during operation.

Specifications

Product Name
T4 DNA Ligase, CAS No.9015-85-4
Synonyms
DNA ligase (ATP) | DNA joinase | DNA repair enzyme | polydeoxyribonucleotide synthase (ATP) | polynucleotide ligase (ATP) | sealase | lig
Grade
ActiBioPure™, Bioactive, High Performance, Recombinant, EnzymoPure™
Specifications & Purity
Bioactive,Recombinant,ActiBioPure™,High Performance,EnzymoPure™,1000 U/μl
Biochemical and Physiological Mechanisms
DNA ligase, which is expressed in the early stage of lytic development, has been implicated in T4 DNA synthesis and genetic recombination. It may also play a role in T4 DNA repair.
Bioactivity
1000 U/μl
Accession #
CAS
9015-85-4
Enzyme Commission Number
EC 6.5.1.1
Molecule Type
Enzyme
Product Line
Biological Products
Storage and Shipping
Concentration
1000 U/μl
Storage
Store at -20°C,Avoid repeated freezing and thawing
Shipped In
Ice chest + Ice pads
Stability And Storage
Store at -20℃ long term (24 months). Upon receipt, it is recommended to aliquot.
Unit definition
One unit is defined as the amount of enzyme required to give 50% ligation of HindIII fragments of lambda DNA in 30 min at 16℃ in 20 μl of the assay mixture containing 50 mM Tris, pH 7.5, 10 mM MgCl₂, 10 mM DTT, 1 mM ATP, 25 μg/ml BSA and a 5'-DNA termini

Advanced Data

Certificates (CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

2 results found

Lot NumberCertificate TypeDateItem
ZJ26F0434238ZJ26F0434238Certificate of AnalysisApr 15, 2026 T665705
ZJ26F0434237ZJ26F0434237Certificate of AnalysisApr 15, 2026 T665705
Documents & Articles
PCR Laboratory Contamination Prevention and Efficient Reagent Application: —Optimizing Experimental Steps and Choosing
7 Types of DNA Ligases: Functions and Features
A Functional Systems Review of Cellular Nucleic Acid Metabolism and Regulatory Enzymes in Gene Expression, RNA Homeostasis, and Immune Defense
Molecular Cloning Screening and Identification Technologies: Positive Clone Confirmation, Restriction Mapping, and Sequencing Validation
Mutant Library Construction, Screening, and Performance Optimization in Protein-Directed Evolution
Citations of This Product
Solution Calculators
Reviews

Customer Reviews

Application Protocols

No vendor-validated protocols are specified for this item; refer to CoA/Spec Sheet for any lot-specific recommendations. The following are literature-based example workflows.

  • Example 1: Cohesive-end ligation (literature)

    • Set up 20 µL: 10–50 ng linearized vector, 3-fold molar excess insert, ligase buffer (with ATP/Mg2+/DTT), optional 1–5% PEG for intermolecular ligation.
    • Add T4 DNA Ligase (per supplier activity guidance); mix gently.
    • Incubate 20–25°C for 10–30 min (or 16°C for 1–2 h).
    • Heat-inactivate if compatible (many protocols use 65°C for 10 min; verify with buffer and downstream steps) or transform directly.
  • Example 2: Blunt-end ligation (literature)

    • Increase insert molar excess to ~5:1; include 5–15% PEG-8000.
    • Incubate 16°C for 4–16 h (overnight commonly used).
  • Example 3: Adapter ligation for NGS (literature)

    • Use vendor-provided or validated ligation buffer with ATP; maintain recommended adapter:insert ratios to minimize adapter dimers.
    • Short incubations (10–30 min) at room temp are typical; perform size selection post-ligation as required.

Note: Optimize DNA purity (remove alcohol/salt), confirm 5′ phosphorylation state, and maintain cold chain for the enzyme. Activity units, volumes, and inactivation temperatures are not specified for this item; consult CoA/Spec Sheet.

Biological Roles
  • Literature/general biology (non-specification):

    • Function: DNA ligases catalyze the ATP-dependent formation of phosphodiester bonds to join DNA strand breaks (nicks) with adjacent 5′-phosphate and 3′-hydroxyl termini. T4 DNA Ligase is a phage enzyme widely used for its robust activity on both cohesive and blunt dsDNA ends.
    • Mechanism: A three-step process—(1) enzyme adenylation (ligase–AMP formation), (2) transfer of AMP to the 5′-phosphate on DNA to form DNA-adenylate, and (3) nucleophilic attack by the 3′-OH to complete ligation and release AMP.
    • Substrate scope: Joins double-stranded DNA ends and seals nicks in DNA/DNA or DNA/RNA hybrids; requires divalent cation (Mg2+) and ATP.
    • Biological context: In vivo, DNA ligases participate in DNA replication and repair. The T4 ligase originates from bacteriophage T4, which must rapidly repair and process DNA during infection of E. coli.
    • Biochemical constraints: Activity is modulated by temperature, ionic strength, crowding agents (e.g., PEG), and end-structure compatibility (cohesive vs blunt).
  • Item-specific biological annotations: Not specified for this item; refer to CoA/Spec Sheet for expression host, tag, or specific activity metrics if applicable.

Buffer Applications

While T4 DNA Ligase is not itself a buffer, its performance critically depends on buffer composition.

  • Literature/generic ligase buffer guidance (non-specification):

    • Core components: Tris-HCl (pH ~7.2–7.8 at room temperature), MgCl2 (typically 5–10 mM), ATP (0.5–1 mM), DTT (1–10 mM). Some formulations include NaCl (0–100 mM) and BSA to stabilize activity.
    • PEG addition: 5–15% (w/v) PEG-8000 commonly enhances intermolecular (vector–insert) ligations, especially for blunt ends.
    • pH considerations: Adjust pH at the working temperature; Tris pH decreases ~0.03 units/°C drop. Aim for pH ~7.5 at room temp for consistent results.
    • Storage of buffers: ATP hydrolyzes over time and with freeze–thaw; prepare fresh or aliquot ligase buffer. Avoid repeated freeze–thaw of ATP-containing solutions.
    • DNase/RNase-free: Use nuclease-free water and plastics; trace nucleases can degrade DNA during long ligations.
  • Recipes and concentrations for this specific item’s supplied buffer: Not specified for this item; refer to CoA/Spec Sheet.

  • Electrophoresis/cell culture: Not applicable—this enzyme buffer is for in vitro ligation reactions, not for electrophoresis running buffers or cell culture media.

Green Alternatives

Enzymatic ligation is inherently a low-temperature, aqueous process with modest energy and solvent demands. Opportunities to improve sustainability focus on workflow choices rather than replacing the enzyme itself.

  • Greener practice options (literature/generic):

    • Aqueous-only workflows: Avoid residual alcohols from DNA precipitation; use spin columns with minimal organic solvent use, or switch to precipitation-free cleanup.
    • Reduce energy/time: Employ room-temperature cohesive-end ligations (10–30 min) when feasible rather than extended cold incubations.
    • Minimize plastic: Consolidate reactions and use low-volume formats to reduce consumables waste.
    • Reagent stewardship: Aliquot enzyme to prevent activity loss and waste from freeze–thaw cycles; store at −20°C as directed.
  • Alternative ligases (context, literature):

    • Taq DNA ligase (thermostable) for ligase cycling reactions can reduce repeat incubations by thermal cycling; however, it requires elevated temperatures and is less general for cohesive/blunt end cloning.
    • Quick ligation buffers/formulations can shorten reaction times at ambient temperature, reducing cold room time; tradeoff may include narrower compatibility with certain additives.
  • Environmental tradeoffs:

    • Enzyme production has an upstream footprint; maximizing reaction efficiency and yield per unit enzyme reduces overall impact.

Note: No item-specific "green grade" is specified for this product; refer to CoA/Spec Sheet for formulation details.

Pharmaceutical Uses

This product is intended for research use only.

  • Item-specific regulatory status: Not specified for this item; refer to CoA/Spec Sheet. No pharmacopeial monograph is indicated in the provided data.

  • Literature/generic context (non-clinical):

    • Role in manufacturing R&D: T4 DNA Ligase is commonly used in research and development stages for constructing plasmids, viral vectors, and DNA cassettes in synthetic biology workflows that may support upstream discovery or process development.
    • Excipient/formulation use: Not applicable—enzymes like T4 DNA Ligase are not used as excipients.
    • GMP considerations: For any application beyond research, sourcing would require qualified GMP-grade materials and full traceability; this listing does not claim such status.

No therapeutic or clinical claims are made or implied for this product.

Physical Properties

For protein enzymes like T4 DNA Ligase, conventional small-molecule properties (bp, mp, logP, refractive index) are not applicable.

  • Item-specific facts (from Product Data):

    • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/general properties (non-specification):

    • Typical subunit size: ~55 kDa monomer (literature)
    • Cofactors: Requires Mg2+ and ATP; forms a covalent ligase–AMP intermediate (literature)
    • Functional form: Active in aqueous buffered solutions; often supplied with stabilizers (e.g., glycerol, DTT, BSA) to maintain activity (formulation varies by supplier; not specified for this item)
    • Activity temperature range: Efficient cohesive-end ligation at 16–25°C; blunt-end ligation often at 16°C or 4–16°C for extended times (literature)
    • pH range: Typically active in Tris-HCl near pH 7.2–7.8 (literature)
    • Salt sensitivity: High ionic strength can reduce activity; PEG (5–15%) can enhance intermolecular ligation (literature)
  • Solubility (literature): Highly soluble in water/buffer; activity depends on buffer composition rather than intrinsic solubility.

Note: For item-specific specs (concentration, units/mL, buffer composition), consult the CoA/Spec Sheet.

Quality & Grades
  • Item-specific grades (from Product Data): Bioactive, Recombinant, ActiBioPure™, High Performance, EnzymoPure™.

  • What these imply (general explanations; not item specifications):

    • Bioactive: Supplied in an active, functional state suitable for biochemical reactions.
    • Recombinant: Produced via recombinant expression for lot-to-lot consistency and reduced contaminant risk (e.g., host nucleases/proteases) compared to crude extracts.
    • ActiBioPure™: House designation typically indicating high specific activity and purity supportive of demanding molecular biology workflows; check CoA for activity units and purity metrics for this lot.
    • High Performance: Formulated and qualified for robust ligations across a range of insert:vector ratios and end types (cohesive/blunt); look for QC metrics such as ligation efficiency in the Spec Sheet.
    • EnzymoPure™: Emphasizes low contaminant background (DNase/RNase/protease) and minimal host DNA, enhancing cloning success.
  • Practical implications for T4 DNA Ligase users:

    • Expect consistent performance in routine cloning, adapter ligation, and nick sealing when used with the recommended buffer and ATP/Mg2+.
    • Low nuclease contamination is critical for maintaining DNA integrity during longer incubations (e.g., blunt-end ligations or overnight reactions).
    • For chromatographic or NGS-grade work, verify UV absorbance background and impurity profiles on the CoA/Spec Sheet.

Note: Specific specifications such as units/mL, purity %, stabilizers, and QC assays are not specified for this item; refer to CoA/Spec Sheet.

Reaction & Applications

T4 DNA Ligase catalyzes the formation of phosphodiester bonds between adjacent 5′-phosphate and 3′-hydroxyl termini in duplex DNA (and at nicks in DNA/RNA hybrids) in an ATP-dependent manner.

  • Common applications (literature/generic):

    • Cohesive-end ligation for routine cloning of restriction fragments into plasmids.
    • Blunt-end ligation of PCR products or blunted fragments (often with PEG enhancement and longer incubations).
    • Adapter/linker ligation for NGS library construction and 3′/5′ end-tagging.
    • Nick sealing in dsDNA (e.g., repair of nicks post-DNA polymerase treatment).
    • Circularization of linear DNA (intramolecular ligation) for plasmid rescue or rolling-circle templates.
    • Splint-mediated ligation of DNA using short complementary oligos to juxtapose ends (literature).
  • Practical tips (literature):

    • 5′-phosphate is required on at least one partner for ligation; treat PCR products with polynucleotide kinase if needed.
    • Maintain fresh ATP (commonly 0.5–1 mM in the reaction); repeated freeze–thaw of buffers can deplete ATP.
    • Optimal insert:vector molar ratios: ~3:1 for cohesive ends; ~5:1 for blunt ends, adjusted by size and concentration.
    • Temperature/time: Cohesive ends, 10–60 min at room temp or 1–3 h at 16°C; blunt ends, 2–16 h at 16°C or 4–16°C overnight.
    • DNA purity matters: remove ethanol/iso-propanol and salts thoroughly after purification; residual solvents/salts inhibit ligation.
Reaction Conditions

The following are literature-based general conditions for T4 DNA Ligase; they are not item-specific specifications.

  • Standard cohesive-end ligation (literature example):

    • Buffer: Tris-HCl pH 7.5, 10 mM MgCl2, 1 mM ATP, 10 mM DTT.
    • DNA ratio: Vector:insert molar ratio ~1:3.
    • DNA amount: 10–100 ng vector in 10–20 µL total volume.
    • Temperature/time: 20–25°C for 10–60 min, or 16°C for 1–3 h; optional 4–16°C overnight for difficult cases.
  • Blunt-end ligation (literature example):

    • Add 5–15% PEG-8000 to enhance efficiency.
    • Vector:insert ~1:5 or higher.
    • Temperature/time: 16°C for 2–16 h; longer incubations (overnight) often beneficial.
  • Enzyme unit considerations (literature):

    • "Weiss Unit" definition: Amount catalyzing ligation of 1 nmol 32P-labeled pCp to RNA/DNA in 20 min at 37°C under standard conditions (historical definition; consult supplier definitions which can vary slightly).
    • Typical usage: 0.1–1 Weiss Units per 20 µL ligation for cohesive ends; 1–5 Weiss Units for blunt ends (optimize empirically).
  • Inhibitors/cautions (literature):

    • Residual ethanol/isopropanol, EDTA, high salt (>150 mM), SDS, and some detergents inhibit ligation.
    • ATP degradation or absence leads to failed ligation; include fresh ATP.

Item-specific buffer composition, enzyme concentration, and recommended unit loadings are not specified; refer to CoA/Spec Sheet.

Safety & Handling
  • Item-specific hazard data (from Product Data):

    • GHS Classification, Signal Word, H-Statements, Pictograms: Not specified for this item; refer to the SDS.
    • Research Use: For research use only.
    • Storage: Store at −20°C. Avoid repeated freezing and thawing. Shipped in ice chest with ice pads.
  • General safety guidance (literature/good laboratory practice):

    • PPE: Wear lab coat, gloves, and safety glasses when handling enzyme solutions and associated buffers.
    • Avoid aerosol generation and contact with skin/eyes. Wash thoroughly after handling.
    • Incompatibilities: Avoid contamination with nucleases (DNase/RNase) or proteases; use nuclease-free plastics and reagents. Avoid heavy-metal contamination that can chelate Mg2+.
    • First aid (overview): If skin/eye contact occurs, rinse with water for several minutes; seek medical attention if irritation persists. If ingested, rinse mouth and seek medical advice. Refer to SDS for authoritative instructions.
    • Spill/cleanup: Wipe with absorbent material; decontaminate with appropriate lab cleaner. Dispose according to institutional and local regulations.
    • Special risks: Enzymes may cause allergic reactions in sensitized individuals; minimize inhalation/dermal exposure. Maintain cold chain to prevent loss of activity.

Always consult the product’s SDS for definitive safety, hazards, and disposal information.

Solvent Selection

This product is an aqueous enzyme preparation; organic solvent selection is not typically applicable.

  • Item-specific note: Buffer composition and stabilizers are not specified for this item; refer to CoA/Spec Sheet.

  • Literature/general considerations for T4 DNA Ligase usage:

    • Medium: Aqueous buffers (commonly Tris-HCl, pH ~7.2–7.8) with Mg2+, ATP, and reducing agent (e.g., DTT) are standard (literature).
    • Additives: PEG (5–15%) can enhance intermolecular ligation efficiency; NaCl concentration is often kept moderate to avoid suppressing activity (literature).
    • Organic solvents: Even low percentages of many organic solvents (e.g., ethanol, isopropanol, DMSO above a few %) can inhibit ligase activity; avoid carryover from DNA precipitation steps. If unavoidable, keep total organic <1–2% and validate empirically (literature).
    • Detergents: Nonionic detergents at very low levels may be tolerated, but many surfactants inhibit ligation; avoid unless validated (literature).
  • Comparison (literature, qualitative):

    • T4 DNA Ligase vs thermostable ligases (e.g., Taq DNA ligase): T4 is optimal at ≤25°C for dsDNA ends; thermostable ligases are chosen for ligase cycling reactions at elevated temperatures.

When preparing reactions, prioritize nuclease-free water and high-purity buffers over solvent considerations.

Storage & Reconstitution
  • Item-specific instructions (from Product Data):

    • Storage: Store at −20°C.
    • Handling: Avoid repeated freezing and thawing.
    • Shipping: Shipped in ice chest with ice pads.
  • Additional handling guidance (literature/good practice; not item-specific):

    • Aliquot upon first thaw to minimize freeze–thaw cycles and preserve activity.
    • Keep on ice during setup; return immediately to −20°C storage after use.
    • Many ligases are supplied ready-to-use in storage buffer; no reconstitution required. If lyophilized (not specified for this item), reconstitute with nuclease-free water or recommended buffer and allow full dissolution on ice.
    • Avoid repeated warming; transient exposure to room temperature during pipetting is acceptable but minimize cumulative time.
    • Do not store working dilutions for extended periods unless stabilized; prepare fresh mixes as needed.
  • Formulation/buffer composition, concentration, and stabilizers for this item: Not specified for this item; refer to CoA/Spec Sheet.

Always follow the SDS and Spec Sheet for definitive storage and handling instructions.

Structure & Identity

Brief description: T4 DNA Ligase is an ATP-dependent DNA ligase from Enterobacteria phage T4 widely used to join DNA ends in molecular cloning.

  • Item-specific facts (from Product Data):

    • Product name: T4 DNA Ligase (SKU: T665705)
    • CAS: 9015-85-4
    • PubChem CID: 168010186
    • Grade/Purity: Bioactive, Recombinant, ActiBioPure™, High Performance, EnzymoPure™
    • InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
    • SMILES: Not applicable for a protein enzyme.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/general identity information (non-specification):

    • Enzyme class: ATP-dependent DNA ligase, EC 6.5.1.1 (literature)
    • Source: Bacteriophage T4 (recombinant expression commonly used for production) (literature)
    • Quaternary/structural features: Single-polypeptide enzyme that forms a covalent lysyl-AMP intermediate during catalysis; requires Mg2+ and ATP (literature)
    • Functional groups (protein context): Polypeptide with catalytic lysine in the active site; no small-molecule structure applicable (literature)
  • 2D structure in words (literature):

    • As a protein, it lacks a defined small-molecule 2D structure; conceptually comprised of an adenylation (NTase) domain binding ATP/AMP, an OB-fold DNA-binding domain, and additional motifs that position 5′-phosphate and 3′-hydroxyl termini for phosphodiester bond formation.
Synthetic Utility

In chemical biology and synthetic biology, T4 DNA Ligase is a cornerstone biocatalyst for assembling defined DNA constructs under mild, aqueous conditions.

  • Retrosynthetic value (literature/generic):

    • Enables modular assembly of genetic elements (promoters, ORFs, tags, regulatory elements) via cohesive- or blunt-end cloning.
    • Facilitates construction of combinatorial libraries and mutagenesis cassettes by ligating oligonucleotide adapters or synthetic fragments.
    • Supports circularization steps in vector construction and generation of templates for rolling-circle amplification.
  • Named/related methods (literature):

    • Traditional restriction–ligation cloning.
    • TA cloning of A-tailed PCR products into T-tailed vectors.
    • Splint ligation for joining oligos into longer duplexes.
    • Ligation-based NGS library prep (adapter/barcode ligation).
  • Practical considerations (literature):

    • End compatibility dictates efficiency: cohesive > compatible cohesive > blunt.
    • Phosphorylation state: Ensure 5′-phosphates are present (via kinase treatment or phosphorylated primers/adapters) when required.
    • Crowding and concentration: PEG and higher DNA concentrations promote intermolecular ligation; intramolecular circularization can be favored by lower DNA concentration.

Item-specific performance metrics (units/mL, specific activity, host residuals) are not specified for this item; refer to CoA/Spec Sheet.

Target Specificity

This product is an enzyme, not an antibody; immunological target fields (antigen, epitope, clone, isotype, species reactivity) do not apply.

  • Literature/generic enzymatic specificity:

    • Substrate: Duplex nucleic acid junctions with juxtaposed 5′-phosphate and 3′-hydroxyl termini.
    • End types: High activity on cohesive (sticky) ends with compatible overhangs; capable of blunt-end ligation with reduced efficiency.
    • Nick sealing: Efficiently seals single-strand breaks in dsDNA and can act on DNA/RNA hybrid nicks (3′-OH on DNA) under appropriate conditions.
    • Cofactor dependence: Requires Mg2+ and ATP for adenylation and catalysis.
  • Item-specific substrate preferences or engineered variants: Not specified for this item; refer to CoA/Spec Sheet.

Frequently Asked Questions

How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What does Bioactive mean?
Bioactive indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
What does Recombinant mean?
Recombinant is a defined analytical purity tier suitable for workflows requiring a specific validated property. It specifies a minimum assay percentage, controlled limits on common impurities (water, heavy metals, residue on ignition), and lot-to-lot consistency. Recombinant is one of several purity tiers — choose based on the sensitivity and regulatory requirements of your method.
How should this product be stored?
Store at ?20 °C. Avoid repeated freeze–thaw cycles. Aliquot into single-use volumes before freezing.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.